Cargo Tie-Down Methods | etrailer.com

Cargo Tie-Downs 101: An Overview

Methods of Securing your Cargo

You can choose from several different kinds of tie-down methods to secure cargo on your truck, trailer, or utility vehicle. The following links will take you to more information on each type.

Basic Tie-Downs

Specialty Tie-Downs

Ladder Rack Tie-Downs

Tie-Down Anchors

Standard Anchor Points

Track Systems

Cargo Nets and Tarps

Usually, cargo nets and tarps are used to cover multiple items, loose loads, or oddly shaped cargo. You should select a net based on the dimensions of your cargo carrier, trailer, or truck bed. Also, you should match the number and type of hooks needed to secure the net to your attachment points. When you're looking at cargo net sizes on etrailer.com, remember that we list the unstretched dimensions unless otherwise indicated.

Pros of cargo nets:

Attach and detach quickly and easily
Sized for specific applications so you can easily choose the right size
Secure multiple or oddly shaped items

Cons of cargo nets:

Limited to cargo carriers, truck beds, and trailers of specific sizes
Designed for light-duty use only
Can allow secured items to shift

At etrailer.com, we carry tarps in a variety of sizes and weights. If you need to protect your load from the elements, be sure to select a heavier-weight tarp that has a polyethylene coating. This coating provides protection from UV rays and harsh weather. Tarps can be secured using bungee cords, general-purpose straps, or clips that are made especially for securing tarps. To reduce wind flap, consider a tarp made of mesh. But remember that a mesh tarp won't keep out rain.

Pros of tarps:

Protect loose material from wind and water
Available in different sizes
Secure multiple or oddly shaped items, or loose material

Cons of tarps:

Difficult to handle in wind
Designed for light-duty use only
Can flap in the wind (mesh tarps reduce wind flap)
Can heat up when exposed to sunlight

Straps

Made of tough material, tie-down straps are available for a wide range of applications. Light-duty straps secure lightweight items like kayaks. Beefier straps can handle heavier items like cars. With a variety of hooks available, straps can fit almost any kind of anchor point. Straps have a cam buckle or a ratchet to help you tighten the strap and keep it tightly secured.

Pros of straps:

Available in a range of weight capacities
Available with different kinds of hooks
Lighter than chain
Won't scratch finished items the way chain can

Cons of straps:

Could fray and wear if stretched over sharp edges
Could be damaged by heat from an exhaust
Could break down from long-term exposure to UV rays from the sun

Bungee Cords

Bungee cords are ideal for securing tarps and smaller, lightweight loads. At etrailer.com, we offer bungee cords in a variety of lengths with either carabiner or hook ends. The cords of some bungees are flat to keep it from rolling when the cord is stretched over an edge.

Pros of bungee cords:

Attach and detach easily
Secure small or lightweight items quickly

Cons of bungee cords:

Designed for light-duty use only

Chains

Of all tie-down methods, chains have the most muscle to handle the toughest tie-down jobs. They're ideal for agricultural and industrial applications. But they're also heavy to handle. If you must strap down heavy loads though, chain is your go-to choice.

Pros of chains:

Durable and heavy duty

Cons of chains:

Heavy to handle
Could damage finished surfaces
Can rust

Tie-Down Anchors and Track Systems

Almost all tie-downs - nets, bungees, straps, and chains - are equipped with hooks so that they can be attached to anchor points. Typically, you can attach tie-down hooks to the edges of a cargo carrier, to the rails of a trailer, or to the built-in tie-down anchors in your truck bed. But sometimes you may not have enough or even any anchors. If this is the case, you can add your own tie-down anchors. At etrailer.com, we offer many types of anchors, from simple D-rings to fully customizable E-track tie-down systems.

Specialty Tie-Downs

Specialty tie-downs are made for specific applications. This includes straps to tie down your gear for watersports, including kayaks, canoes, boats, and surfboards. Other specialty tie-downs let you quickly secure wheeled machines. Another kind of strap makes it easy to attach equipment to ladder racks. If you need tie-downs for a particular application, one of these specialty kinds could make the job of securing your gear easy and fast.

Boat Straps

If you tow a boat, you can get tie-down straps specially made for the job. Heavy-duty BoatBuckle straps are equipped with Kwik-Lok buckles or ratchets to allow for rapid loading. And the padded buckles and vinyl-coated steel S-hooks of these straps protect your boat's finish.

Specialty straps are made for tying down the bow, gunwales, and transom of your boat. Some of these straps can be permanently attached to your trailer. For convenience, these permanent straps retract so they're out of your way when not in use.

You can also get straps to tie down battery boxes and gas tanks.

Vehicle Tie-Downs

If you need to secure a wheeled vehicle, you can choose from among several types of tie-down setups especially designed for this use. You can get straps made to secure the axle of a vehicle or to go over a tire to hold it and keep it from rolling. Light vehicles or machines like motorcycles, snowmobiles, ATVs, construction equipment, and mowers can be secured with tie-downs that include chocks or frames that brace one of the vehicle's wheels. See the following types of specialty tie-downs to find exactly what you need to secure your vehicle.

Axle Straps

These tie-downs consist of 2 pieces - a strap that forms a loop around an axle of your vehicle and another strap that connects from the loop to an anchor point on your trailer. The second piece usually includes a ratchet for tightening the strap. These straps can connect to suitable anchors, including E-track.

Wheel Nets

These tie-downs form a cradle of straps that go over one of the tires of your vehicle and connect to anchor points on your trailer or tow dolly. They often include a ratchet system so you can easily tighten the straps. Many wheel nets can be attached to E-track anchors.

Special Tie-Downs for Lightweight Vehicles

Several kinds of specialized tie-downs are available for lighter machines like ATVs or motorcycles. Click below and check out specialty tie-downs for the following types of vehicles:

Wheel chocks are a great way to secure wheels when you tie down your vehicle. Some chocks are made to hold a motorcycle wheel firmly in place. Others are designed to secure ATVs.

A popular option for safely hauling ATVs, construction equipment, and mowers is the versatile tie-down system from Pack'Em. This system has low profile chocks that mount to the surface of your trailer or truck. Your vehicle's tire rests in between the chocks and is secured by a strap that wraps over and attaches to slots in the chocks.

Watersport Tie-Downs

You can easily secure canoes, kayaks, surfboards, paddleboards, and other kinds of boats to vehicle rooftops with these specialty tie-downs. Some of these tie-downs work with standard crossbars and others are designed to work in combination with specialty racks that are made for particular watersport craft.

Anchor straps provide a useful anchor point for tying down watersport gear. They can also help you to secure other kinds of rooftop cargo. These straps mount under your hood or trunk and can be pulled out when you need them to provide loops for attaching tie-downs. When you don't need them, you can tuck them under your hood and out of the way.

Ladder Rack Tie-Down Straps

CargoBuckle makes a ladder rack strap to tie down ladders or other cargo. It mounts permanently to your ladder rack, ratchets for convenient tightening, and retracts when not in use. All of these features give you a lot of convenience.

Written by: Raymond P

Updated by: Jacob J

Last updated: 1/18/2024

Explore Expert Info

on Tie Down Straps

Videos

for Tie Down Straps

Help Articles

for Tie Down Straps

Expert Answers

for Tie Down Straps

Review of Yakima Camping and Hiking Accessories - FlexHead Shower - Y04106

etrailer Horizontal E-Track Review

InfiniteRule B and W Tow and Stow Ball Mounts Locking Pins Review

Erickson E-Track Tie-Down Kit with Ratchet Straps, Wheel Chocks, and Roller Idlers Review

B and W Hitch Receiver Reducer Sleeve Review BWRHXA2182

Review of etrailer Hitch Locks - Standard Hitch Pin - E98881

Review of BulletProof Hitches Trailer Hitch Ball Mount - Adjustable Ball Mount - HD206

Optronics Wiring - Wiring Adapters - A57CCB Review

Curt 17x46 Hitch Cargo Carrier Review - 2023 Chevrolet Tahoe

Curt Hitch Cargo Carrier Review - 2021 Tesla Model Y

Curt Hitch Cargo Carrier Review - 2012 Nissan Xterra

Thule Hitching Post Pro Hitch Bike Rack Review - 2009 Chevrolet Traverse

How to Install E-Track in 3 Easy Steps

Determining Trailer Tongue Weight

Trailer Maintenance Schedule

Basics of Tie-Down Anchors

What Exactly is Tongue Weight?

Basics of Tie Down Straps

The Best Trailer Tongue Locks for Preventing Trailer Theft

Basics of Cargo Nets and Tarps

5 Things to Know About Weight Distribution Hitches

What To Look For When Buying Ratchet Straps

Trailer Hitch Receiver Sizes

Bungee Cord Basics

What Side Should my Spare Tire Mount go on my Trailer

Either one is fine to do. With the Fulton Hi-Mount Spare Tire Carrier part #FSTC1000301 you are not going to be adding a great deal of width to your trailer so the difference is minimum. Giving you my opinion since there is no rule I would Choose…

view full answer...

How to Pick the Height for Installing E-Track on a Trailer Wall

The height of where you install the E-track will depend greatly on where it will work best for the cargo you plan to tow. Most people put it around half way up or lower. But once again that will just depend on where it will work the best for you.…

view full answer...

Solutions for Securing e-Bikes Inside Enclosed Trailer

I really like the Rack'em Single Hook Rack #RA-8. These padded heavy-duty hooks aren't specifically designed for bikes but they will offer a higher weight capacity that should handle your bikes, especially when using 2 of them per…

view full answer...

How to Mount Bicycles to an Enclosed Trailer Wall

The Traffic Cone Holder, #RA-26, that you mentioned is designed to store cones that are 12" - 36" tall, and the arm of the holder is 22-3/8" long. The arm does not fold down a full 90 degrees, so this would not be the best…

view full answer...

Will Trailer Hitch for 2016 Subaru Outback Be Easy to Install

Trailer hitches are normally relatively simple installs. The Draw Tite hitch part #76227 that you referenced which is a confirmed fit for your 2016 Subaru Outback Wagon is more involved than most but if you have basic mechanical skills and tools it…

view full answer...

Difference Between EcoHitch, Curt and Draw-Tite 2 Inch Hitches for 2020 Subaru Forester

What sets the EcoHitch #306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this is…

view full answer...

Comparing the EcoHitch #306-X7266 and Draw-Tite #76227 for a 2017 Subaru Outback Wagon

The Draw-Tite #76227 is a great hitch and will fit your 2017 Subaru Outback Wagon. It has a weight capacity that exceeds your Outback Wagon's towing weight capacity of 2,700 lbs . Even though it is rated for more, you are limited by your lowest…

view full answer...

What is a Concealed Cross Tube Trailer Hitch

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Straps or Tie Down Recommendations for Curt Trailer Hitch Mount Cargo Carrier

For tie downs on Curt cargo carrier #C18151 you can't go wrong with the versatility of bungee cords, #EM06623. This set comes with 12 bungees. You can never have too many bungees. Another useful tie down method is to use a cargo net such as…

view full answer...

Mounting Plate Bolt Hole Dimensions For Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR

The mounting plate for the Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR has the following dimensions. I have included an image to show the measuring points. The holes are spread 5-1/2" wide with the vertical holes separated 1" on the…

view full answer...

How to Replace a Damaged Thule Lock

If the lock core is removed then all you would need to do is install a new one. In order to receive a lock core that works with the key you have now then you would need to search on our site for THLOCKN###with the ###being the code on your key. For…

view full answer...

How to Remove a Thule Lock Cylinder with Broken Key Stuck Inside

The only way to remove a Thule lock cylinder like the ones in #TH450400 is by inserting the master key into a cylinder in the unlocked position. However, I have a few tips and tricks to help you remove the broken key to allow for the master key to be…

view full answer...