Filter Products
Filter by Type of Top
$347.24 - $347.24
Videos
for UTV Tops
Help Articles
for UTV Tops
Expert Answers
for UTV Tops
I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps #CB32MR below. If you are needing a different measurement please let me know.
view full answer...I spoke with the manufacturer and they recommend using 160 ft-lb for the torque spec on a 3/4 inch U-bolt #11-70.
view full answer...According to the installation instructions from Dexter Axle the torque specs for the wet bolts on their Dexter E-Z Flex Suspension Kits, like part #K71-653-00, is 30 - 50 ft-lbs. I have attached a clip from their instructions for you to check out.
view full answer...We have that size (see link), but none of the tires are radial. They are all bias ply as that is the common construction for the LT tires. The closest tire size that is radial would be the 235/80R16 like part #TTWTRTM2358016E. This size has a…
view full answer...The Electric Jack w/ Footplate is offered both with the plug part #EJ-3527-BBX and without the plug part #EJ-3520-BBX. Therefore, if you wanted to go with the model that has the plug and just cut that off you would indeed just run the wire to the…
view full answer...We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…
view full answer...Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.
view full answer...I went out to the warehouse to take a look at the Gustafson 12V RV LED Pendant Light w/ Light Shade #277-000456 and tried to disassemble it but they glued the screws in place on it so I wasn't able to take it apart without damaging the light.…
view full answer...With Curt Short Arm weight distribution systems like the part #C17322 that you referenced the distance from the center of the hitch ball to the far edge of the chain hanger will be 30-5/8 inches. A lot of times the best solution for V-nose trailers…
view full answer...The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…
view full answer...I checked with Classic Accessories and the Classic Accessories All-Weather UTV Cab Enclosure part #CA18020 is listed as a fit for a Kawasaki Teryx 750 till 2015. Therefore, yes, it will fit a 2007.
view full answer...I do have an option for you but there isn't a weight distribution system specific to an American Hauler Enclosed Trailer. It looks like the old owner welded some brackets to the frame for a system but I'm not sure which one that was. The best…
view full answer...