There are three wiring harnesses available for the 2009 Santa Fe. If your vehicle is equipped with the tow package, use part # 118258 that would plug into the the existing factory connector under the vehicle.
If your Santa Fe was not equipped with the tow package, you can use either the Tow Ready # 118415 or the Curt # C56078. Either of these harnesses would connect inline with the factory harness behind each tail light assembly.
I will link you to install instructions, as well as an... view full answer...
I recommend the etrailer Trailer Hitch Receiver # e95ZR for your 2023 Hyundai Palisade. I like this trailer hitch over the others that we offer because it has a matte black powder coating that will make the scratches and scuffs that you will receive while towing less visible than the others hitches we offer. The trailer hitch has a bolt-on installation with no welding required.
We currently do not have a installation video on the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle... view full answer...
We do have the Thule WingBar Crossbars in aluminum at 50 inches part # TH711300. If you need mounting hardware or any accessories feel free to reach out to me with your year make and model and I can further assist you in finding the right parts for your application. view full answer...
Curt hasn't been able to obtain a 2022 Santa Fe to do a test fit on, but we've done extensive research on the vehilcle, and have found that the only rear-of-vehicle difference between the 2021 and 2022 models is that they've added an XRT trim level.
We can state with certainly that the Curt 13473 which we sell as part # C34ER will fit the 2022 Santa Fe, with the exception of the XRT trim, as we don't know to what degree that's changed the geometry of the rear of the vehicle.
For a trailer... view full answer...
When it comes to your 2020 Hyundai Santa Fe I recommend The Rhino Rack Vortex Aero Bar System. This kit will work if you have flush mounted rails that run front to back. The kit comes with three parts that you will need. You need The Rhino-Rack Vortex Aero Crossbars # RRVA126B-2, you need The RCL Legs for the cross bars # RRRCL4, and finally need The RCP Fit Kit # RR66QJ. These parts will give you the complete roof rack setup.
When it comes to the Rhino Rack Snowboard Carrier # RR576... view full answer...
The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" item # e98841 you referenced is a confirmed fit for your 2017 Hyundai Santa Fe Sport without the towing package. It bolts directly to your Hyundai's frame with included hardware. It has a maximum gross trailer weight of 6,000 lbs and a maximum tongue weight of 900 lbs. I have linked an installation video so you can follow along with the process and see what the final product will be.
Since your Santa... view full answer...
I have a solution for you, but the port you're referring to does not allow the direct installation of a 7 way trailer plug on your 2021 Hyundai Palisade. If you don't have a 4 way plug already there, you'll need to start by installing one; for that I recommend using the Curt # CU94FR instead of the available Tekonsha harness since the Curt comes with a powered converter box that will do a better job of protecting the electrical system on your 2021 Palisade in the event of a short on the... view full answer...
We can definitely help set you up. The best wiring kit for adding a 7-way plug to a 2023 Hyundai Palisade is the Tekonsha OEM Replacement Vehicle Wiring Harness # TK64CR. This is a complete wiring kit so you will get everything you need to add a 7 way, including the necessary wires for a brake controller. For a brake controller we recommend the Tekonsha Prodigy P3 # 90195. This is a very solid, easy to use brake controller, and it will be an easy 4 wire install when paired with the Tekonsha... view full answer...
We can help you with wiring for your 2010 Hyundai Santa Fe Sport so you can tow your camper that has a 7-way wiring set-up.
If the car has no wiring at all you will need to start with a 4-pole harness # 118415 that is a simple plug-in installation at your Santa Fe's tail lights. You'll then add the 7-way installation kit # ETBC7 which provides both the 7-way connector you need and the other parts to install a brake controller.
Campers with a 7-way type wiring set-up usually have electric... view full answer...
We do! For a hitch on your 2022 Hyundai Tucson I recommend the Curt # C94WR because we have found that the Curt hitches tend to have a thicker powder coat so they resist the elements better.
For wiring I recommend the Curt T-Connector # CU94FR because it has the highest amp rating. This gives you the basic lighting functions for your trailer.
If you're wanting to utilize the trailer brakes then I also recommend installing the Wiring Upgrade Kit # ETBC7L so that you can use the Curt Echo... view full answer...
If your vehicle has the factory 7-way at the rear of it then no, you would not need any additional relays to install the Prodigy P2 Brake Controller part # 90885 in your 2007. If you installed an aftermarket 7-way then you would need to install relay(s). We do not carry the relays, you could track them down at a dealer or at a local auto parts store. view full answer...
For your 2022 Hyundai Palisade, I recommend the:
-Saris Bones EX 2 Bike Rack # SAR83FR.
This bike rack can carry up to 2 bikes weighing 35lbs each, and secures to the trunk with 6 cam-buckle straps with rubber clip anchors. view full answer...
First you will need a hitch like part # C11220 installed on your vehicle with drawbar part # 3593 and a 3/4 inch shank Hitch Ball fitted for your trailer like those found on the link I have provided. Please note, the manufacturer specifies this drawbar to be used only in the rise position. Once you have these, the next step is wiring for the trailer lights.
The first wiring step is to add a connector to your vehicle. You will need part # 119178KIT. This hardwire kit includes a tester to... view full answer...
To install a 7 way to your 2021 Hyundai Palisade you'll need an existing 4 way at the rear of the vehicle. If you do not have one already, you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR. This is an extremely simple to install, custom made kit that will plug directly into your vehicle's existing harness.
From here we can install a 7 way with the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires # ETBC7L which... view full answer...
In order to add a 7-way connection to your 2022 Hyundai Palisade you will need to start with a 4-way wiring harness. I recommend the Curt T-Connector Vehicle Wiring Harness # CU94FR. This wiring harness will plug into the existing port in the rear of your vehicle.
Once you have this installed you will need the Universal Installation Kit # ETBC7. This kit comes with the adapter, wiring, and everything else you need to add the 7-way connection. The included adapter will allow you to use... view full answer...
As the T-One Vehicle Wiring Harness # 118812 is only a 4-way flat connector you will need the Universal Installation Kit for Trailer Brake Controller # ETBC7 as well for your 2019 Hyundai Tucson. This installation kit will accept the 4-way from the Tekonsha harness for the lighting and provide you with the wiring needed to install the Tekonsha Primus IQ Trailer Brake Controller # TK90160. view full answer...
The Draw-Tite Max-Frame # DT22MR is a great hitch for your 2022 Hyundai Tucson!
For wiring we'll need to start off with the T-One # CU94FR which gets us the basic trailer light functions. To add the rest of the functions needed for a brake controller we need an adapter like you mentioned. The correct one just depends on what kind of brake controller you're wanting to use.
For a standard brake controller like the Prodigy P3 # 90195 you'll need the Wiring Harness # ETBC7 but if you're wanting... view full answer...
The Thule WingBar Evo Crossbars - Aluminum - Silver - 47" Long - Qty 2 # TH711200 requires Foot Pack # TH460R and Fit Kit # THKIT4093 if you have the flush roof rails on your 2020 Hyundai Sante Fe. This system has a weight capacity of 130lbs. I attached an installation video for you to check out. view full answer...
Currently there is not a T-one wiring harness for your 2022 Hyundai Tucson that will be wired directly to a 7-way trailer connector.
You will need to use the Tekonsha T-One Vehicle Wiring Harness # 118812 to connect to a 7-way like the one included in our Universal Installation Kit # ETBC7. If you wish to not have the quick disconnect you can cut off the connectors and use Deka Heat Shrink Butt Connectors # DW05744-5 to have a permanent connection. The universal kit includes all the wiring... view full answer...
To install the Thule SquareBars on your 2010 Hyundai Santa Fe with the flush mounted rails you will need the Thule Fit Kit for Podium Style Foot Pack, part # THKIT3024, and the Thule Rapid Podium Roof Mounted Foot Pack, part # TH460R.
On the 2010 Hyundai Santa Fe it is recommended to use the Thule 43 Inch Long SquareBars, part # TH712100.
Anytime you are going to haul cargo on the roof of your 2010 Hyundai Santa Fe you will want to check the owners manual or with the Hyundai dealer for... view full answer...
Go To Results