Yes, the Hydrastar # HS496-252 will work perfectly fine with drum brakes,
The Dexter Hydraulic Brake Line Kit # 034-283-00 you mentioned includes the following:
(1) 3/16" x 17' Brake Line
(2) 3/16" x 72" Brake Line
(2) 3/16" x 17-1/2" Brake Line
(1) 3/16" x 50" Brake Line
(2) 1/8" I.D. x 18" Brake Hose
(2) Frame Brackets
(2) "U" Clips
(2) 3/16" Union Tee w/ Bracket
(1) 3/16" male x 3/16" female x 3/16" female Tee
(1) 3/16" Female Tubing x 1/8" Male Pipe Thread Connector
(6) Axle Straps
(4)... view full answer...
Yes, the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers, part # TLC1201, does come with the mounting hardware for your 1996 Chevrolet C/K Series Pickup. view full answer...
I reached out to my contact at Pollak and the Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End # PK12711U you were looking at includes four 3/16" x 5/8" long screws, four 3/16" nuts, and two #8 x 1/2" long self tapping screws.
I included a video of the # PK12711U for you to take a look at. view full answer...
The Westin E-Series Round Nerf Bars part # 23-0500 which is a fit for a 1998 GMC C/K Series Pickup is a complete kit, it comes with both nerf bars and the mounting brackets/hardware needed for installation. The nerf bars are 3" wide. view full answer...
The MaxxAir Mini Deluxe Trailer Roof Vent, # MA00-03801 has a bug screen over the fan blade and the motor is encased within the upper and lower pieces of the unit. Please see the attached product review video. view full answer...
I do believe you're referring to the fishwire used in the installation of the Draw-tite # 65053, and that is included with the installation hardware. This is going to give you all of the hardware that you'll need to complete this installation. view full answer...
The Replacement Load Stop Assembly for Erickson Aluminum Truck Bed Ladder Rack # EM57705 are only sold with the plastic triangle and mounting bracket so you'll have to either get this whole kit or try to see if someone is selling just the load stop part of this kit. view full answer...
Wiring harnesses are not included with Curt hitches. Hitches include the hardware needed to mount the hitch to the vehicle. Some Hidden Hitch models will included a draw bar and pin and clip. There are a handful of Valley hitches that have integrated wiring.
For your 2005 Honda Pilot, you would use either part # 118336 or part # 33105 for a trailer wiring harness. view full answer...
It sounds like your supplemental braking system is probably draining the battery, and each vehicle has it's own flat towing processes that need to be followed. I can't say that I would recommend flat towing with the vehicle running but you can add a charge line to your vehicle with the Roadmaster Charge Line Kit for Towed Vehicles # RM-156-25. This will allow you to use the charge line on your RV's 7 way connector to charge your battery during travel. If you don't have a charge line on... view full answer...
The Trailer Hub and Drum Assembly - 5.2K and 6K E-Z Lube Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K you were looking at come as a quanitity of one hub. This hub includes the inner and outer bearings, inner and outer races, grease seal, grease cap, and lug nuts needed.
You will need two of the # AKHD-655-6-EZ-K per axle.
I included a few videos of the # AKHD-655-6-EZ-K for you to take a look at. view full answer...
The Performance Tool Vehicle and Trailer Aligner part # PTW1276 comes with two telescoping magnet poles with foam balls. The foam balls can also be swapped out for the light heads. view full answer...
The Peterson License Plate Light part # PM436B does not come with hardware. It will require a few screws to attach to bracket to the trailer and then a few nuts and bolts to attach the plate to the bracket. This is very common hardware that could be obtained locally without issue. view full answer...
If you have a single axle trailer you would need to order two Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K as they are sold individually. view full answer...
I can definitely help eliminate the confusion. The Roadmaster Hitch Extender # RM-071-75 does not come with any additional parts with it.
If you want a compatible hitch pin lock, I recommend the etrailer Hitch Pin Lock # e98882. As far as anti-wobble, the best option is to use a collar like the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel # e99007. With these two components, you receive theft-deterrence as well as added stability.
I went ahead and attached... view full answer...
No hardware comes with the Replacement Crossbar for Thule Xsporter Truck Bed Ladder Rack - Black # 8523146002.
That said, the only thing you might need, if you don't have them, are the square nuts and screws that mount under the saddle and go in the bottom of the crossbar. Those parts are the following:
- Replacement 3/8"-16 x 5/8" Button Head Screw for TracRac Ladder Racks # TAHD-27051
- Replacement 3/8"-16 Square Nut for TracRac Ladder Racks # TAHD-8088 view full answer...
Yes, the Lippert Components 28:1 Venture Actuator Slide-Out Motor # LC136373 does have a clutch that prevents it from over travelling. view full answer...
Hardware is included with the seat adapter, # RM-88150. If you are talking about the mounting post, that is part of the BrakeMaster assembly. If you are missing that part there is a kit you can use, # RM-450596. The pin that holds the post to the BrakeMaster is # RM-356997-00. view full answer...
I went to our warehouse and pulled the Erickson Bungey Ball Bungee Cord Tie-Downs, part # EM06650.
Every package we have on the shelf has red balls as shown on our product page, so I can feel safe in saying that you will receive the bungee cords with red balls. view full answer...
The CIPA Deluxe Door Mount Mirror, part # 11650 is sold individually and can work for either the driver or passenger side of the vehicle, so you would need to adjust the quantity in the shopping cart to get a pair.
This mirror measures 5 x 8 inches and extends out 17 inches. view full answer...