The Pop and Lock Custom Tailgate Handle with Lock - Codes to Ignition Key - Manual - Magnetic Grey # PAL5409 will have the same basic construction as the part # PAL5400 as the only real difference is that one keys to the ignition while the other uses a unique key that doesn't key to the ignition. When I read the reviews we have on part 5400 I found people saying that they felt the construction was weaker than the OEM handle, but I wasn't able to find any saying the the lock actually broke;... view full answer...
The Replacement Double T-Slot Cross Bar # TA8523447003 comes with just the bar. If you need end caps for these bars you can use the Replacement End Caps # TA01-27023. I've also listed some potential hardware replacement options for a TracRac TracONE system like the # TH27000XTB-XK4B for you below as well:
Replacement Fastener Kit for TracRac TracOne Ladder Racks # TA01-27016
Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Rack, Thule TracRac CapRac # 753-3761
Replacement M6-1x14mm... view full answer...
Great question! The Replacement QuickAccess T-Slot Track Strip # 1500052989 comes with a quantity of 2 separate 59" strips. Given those lengths, it depends on the length of your crossbars you have installed whether they can fit yours with just a single kit. They are only designed to fit Thule WingBar crossbar models (which include the Evo models).
I went ahead and attached a video that shows you the installation process as well as a video that shows the dimensions and quantity that come... view full answer...
You are correct, the Original Custom Towing Mirror Custom Slide On Mirrors (Pair), # CTM4000, does come with 2 mirrors, one for each side of the vehicle. The mirrors also come with the appropriate mounting hardware which you can view in the last picture on the product page. view full answer...
Yes, the Curt Class II Drawbar, part # C45520, is included with the Curt Class II 1-1/4 Inch Hitch, part # 12339, for your 2003 Toyota Camry. It will also include the Curt Class I and II Pin and Clip, part # F-4. I am including a link to a video of this Curt hitch being installed on a 2003 Toyota Camry.
To complete your towing setup, you will also need the Tow Ready 2 Inch Hitch Ball, part # 19258, or the Tow Ready 1-7/8 Inch Hitch Ball, part # 19256 and the Tow Ready T-One Wiring Harness,... view full answer...
I believe you're talking about adding a wiring kit to your 2018 Toyota Highlander. If you need the wiring assembly that has the black module box connected to it then you need the whole wiring kit # 118449 that also comes with the 4-Way connector.
Attached is an installation video of this harness on a 2018 Highlander that you can check out. view full answer...
The Titan Chain Heavy Duty Alloy Snow Tire Chains # TC2229SHD has 9 cross chains and fits 235/65-18 size tires on your 2020 Toyota Highlander.
Attached is a review video for you to check out. view full answer...
Yes, the center pin on trailer side wiring harness # H20046 is for reverse lights on the trailer. For this particular harness it is the yellow wire. But it will only work if the center pin is functional on your 2012 Toyota Tacoma. If you have the factory installed 7-Way on the Tacoma then it should be active. view full answer...
If your key needs to be in the ACC position so that the steering wheel is unlocked you would need to have the battery disconnected so that it wouldn't drain.
I'd recommend using a Roadmaster Automatic Battery Disconnect, part # RM-766. The disconnect would allow you to 'disconnect' the battery with a flip of a switch. When the battery is disconnected, the taillight circuit from the RV will maintain the battery in the towed vehicle (you'll need to leave the running lights in the RV on... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11473 you were looking at for your 2017 Toyota Prius Two does not include a vehicle wiring harness.
You will need to purchase one separately using # 118701 as long as your Prius is not the Prime model.
To finish your towing setup you will also need drawbar # C45521, 1-7/8" hitch ball # A-80 or 2" hitch ball # A-82, and hitch pin and clip # F-4.
I included videos of the products mentioned for you to take a look at. view full answer...
Replacement Sliding Clamp Assembly for Extang eMAX Soft Tonneau Cover # EX1104 comes with both clamps, not just one. I attached a demonstration video which goes over this clamp and shows how two are included. view full answer...
No hardware comes with the Replacement Crossbar for Thule Xsporter Truck Bed Ladder Rack - Black # 8523146002.
That said, the only thing you might need, if you don't have them, are the square nuts and screws that mount under the saddle and go in the bottom of the crossbar. Those parts are the following:
- Replacement 3/8"-16 x 5/8" Button Head Screw for TracRac Ladder Racks # TAHD-27051
- Replacement 3/8"-16 Square Nut for TracRac Ladder Racks # TAHD-8088 view full answer...
The Rhino-Rack Steel Mesh Roof Mounted Cargo Tray # RPBL-S280 includes universal hardware to allow mounting on most all types of roof rack crossbars. The hardware will fit bars up to 3-7/8-inches in diameter as long as they are at least 50-inches long and spaced apart no more than 58-inches. The slight curve in your crossbars will not interfere with installation. You will want to take care to not over-tighten the hardware as this could cause distortion of the mesh carrier.
Since this carrier... view full answer...
Yes, the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 84" Long x 49" Wide Item # JA8647 does come with the Backbone mounting system (even though it isn't shown in our pictures). view full answer...
Yes! I went ahead and called my tech at Hollywood Racks, and he confirmed that the RV Rider # HLY64FR comes with 2 of the Small Wheel Hoop Adapters # HLY24FR (SW-ADP-U). view full answer...
The Swagman XTC4 4-Bike Rack part # S64665 does indeed come with locks, both a hitch pin bolt to secure the rack to the receiver and a steel cable to secure the bikes to the rack. I have attached for you a full list of parts that come with. view full answer...
The Bestop Supertop you mentioned, part # B5146415 is a confirmed fit for your 1982 FJ40 Land Cruiser. The package includes the top, the bows/supports, zip-out windows, all necessary hardware and a rear tailgate bar that allows easy access to the rear cargo area. Soft doors aren't included.
You might also consider Bestop's vinyl window cleaner, part # B11203 as glass window cleaner can cause the vinyl to scratch and yellow over time.
If you click the provided link, you can see everything... view full answer...