Your trailer will be completely safe from your 2015 Mini Cooper exhaust with the EcoHitch Hidden Trailer Hitch Receiver # EH67FR installed.
To complete your trailer towing setup you need the Curt Powered Tail Light Converter # C59236, the Eclipse Magnetic Mounting Bracket # 306-X6019, and a ball mount to match the height of your trailer.
Be sure to mount the wiring bracket out to the side of the hitch because the exhaust will definitely melt the wiring if you have it close to the exhaust.... view full answer...
I am a little bit confused as to what you are wanting to do. The Blue Ox Tail Light Wiring Kit # BX88267 that you mentioned uses its own bulb that works both as the brake and turning signals. It completely bypasses the wiring on your 2004 Mini Cooper and directly connects to the motorhome for signal source.
If you check out the linked installation video you can see our team install this kit as well as the Flexo-Coil Kit # RM-164-7 for flat towed wiring. view full answer...
Are you certain it is a Pollak PA66-ND40 as opposed to a Pollak PA66-MD40? The only reason I ask is we do have a replacement for the MD40, which is the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket # PK11893-11933 which we know has been a replacement for Sprinter RVs. I have been unable to find any type of reference to a ND40 connector. view full answer...
When I first got my Raceway bike rack, I had the same problem. There are a couple of things that you can try to get the top hooks in place. First, what works for me is to put the hook above the opening it needs to go into and then pushing it into place. The coating protects the vehicle from any damage.
Another thing you can do is pull out some slack from the retractable cable and try to get the hook in at the corner or edge and then slide it over into position. This works for me when I... view full answer...
Roadmaster quotes their installers to take around 2-1/2 hours, however an experienced professional should expect installation of the Roadmaster Direct-Connect Base Plate Kit # RM-521882-5 to take around 3 hours.
If you are a novice, you can expect this to take a bit longer as there is some trimming of the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required.
I have also included an installation video of # RM-521882-5... view full answer...
Curt does require use of a stabilization strap for their Class I Hitches. Normally, you'd use a Stabilizing Strap like part # 18050 but like many hatchback vehicles, you're running into a simple problem that is easy to fix.
For this, you'll want to purchase part # Y02612 , a set of Yakima Glass Hatch adapters. This part will give you an alternate location to hook the stabilizing strap to that will evenly apply pressure to the padded security bar, removing the need to mount the support... view full answer...
The rear center light of your 2004 Mini Cooper will need to be removed to install the Curt hitch part # C11126. The hole where the light was is where the hitch opening will come out.
Check out the install instructions link I attached for more info on how the hitch installs.
For trailer wiring you would need the part # 119250KIT, for a ball mount # C45551 for a 1-7/8 inch ball or part # C45552 for a 2 inch ball. view full answer...
The WeatherTech Cargo Area Liner # WT41539, which fits your 2014 Mini Countryman without the optional Flat Load Floor, is intended to install on top of the standard carpet-like liner in the cargo area. This cargo mat features a textured bottom surface to hold the mat in place and it is USA-made. view full answer...
The Custer LED Amber Quad Flash Kit, # CPL65A-STR, was not designed to be surface mounted. The sockets for the plug-in wiring harnesses protrude past the back of the light so they would not sit flat. The only surface mount flashing amber lights that we offer are magnetic lights like the Custer Adjustable Amber LED Emergency Light, # HF18A-MB.
I have attached a link to all of our flashing warning lights for you to check out. view full answer...
Yes, the Blue Ox Tail Light Wiring Kit # BX88267 gives you brake, running, and turn signals.
I have attached a review video and an installation video for you to reference as well. view full answer...
Yes, the Saris Bones EX 3 Bike Rack - Trunk Mount - Adjustable Arms, part # SA803, is compatible with your 2016 Mini Cooper S. I also check the fit notes on the Saris website and you will need the Hatch Huggers for Saris Trunk Mount Bike Racks, part # SA3035, to replace the top hooks of this rack.
I have included a product description link and video review links below. view full answer...
I spoke with my contact at Yakima regarding the Replacement 1-1/4 Inch Tongue for Yakima HoldUp Bike Racks # 8880581 referenced in your question. She stated that the only additional hardware that will be needed to install the tongue is the existing screws on your HoldUp Bike Rack. You will not need any additional hardware to properly install this replacement part.
This can be used to replace the tongue on the 1-1/4 inch HoldUp Bike Carrier or to convert the HoldUp for 2 inch hitches for... view full answer...
For your axle placement you will use the attached article to determine the distance between your trailer coupler and axle to get that 10% tongue weight desired. Because you have a torsion axle it will be much easier to test your theory to really pin point your desired tongue weight.
I can't just give you a dimension because the coupler weight needs to be integrated in the equation. For instance the coupler # CT-3002-Z has a weight of 5 lbs that would be added to the pole tongue to... view full answer...
I have a solution for you if you have drum brakes, but I spoke with my contact at Titan and he did not have a recommended way to manually lock out a trailer brake actuator that has an electric reverse lockout.
The best thing you can do is get some free backing trailer brakes. These brakes allow your trailer to back up without activating the brakes, even if your trailer does not have a reverse lockout. Since I do not know what size brakes you have I attached a page that has all of the different... view full answer...
The light-duty Class I hitch we offer for the 2010 Mini Cooper S, Curt hitch # C11130, installs without drilling but will require heat shield modification (if it has a center exhaust) and will also require you to trim the rear valance. You will need to temporarily remove the bumper to provide access to the hitch mounting points.
This Curt hitch comes complete with all installation hardware and the linked installation instructions detail the tools required, which include a torque wrench.... view full answer...
To adjust the height of the mounting bracket on the Fulton F2, part # F1413040134, you need to loosen the bolt behind the bracket (which it sounds like you have) as well as the bolt in the middle of the bracket. Take a look at video that I have attached for you.
Make sure to tighten both bolts back to spec per the instructions after adjusting the height. view full answer...
Yes. When installing the Draw-Tite # 75151 there is going to be some trimming of the plastic fascia required, since this hitch is a concealed cross tube hitch that mounts behind the bumper on your 2009 Mini Clubman. This may sound a bit daunting, but these modifications are really quite easy and can be done with a hole saw and a standard hand drill. This is the only hitch we have available that is a confirmed fit on your 2009 Mini Clubman.
I've added a photo to show the modification that... view full answer...
The hardware needed to attach the Replacement Stabilizer Bar part # RM-B001225 to the Roadmaster Tow Dolly with Electric Brakes part # RM-2050-1 is not included nor is this something that Roadmaster offers separately. That said, all you would need to do is take a trip to the hardware store and pickup the following:
(2) 1/2"-13x1-3/4" Hex Bolts Grade 5
(1) 1/2"x4-1/2" Hex Bolt Grade 5
(6) 1/2" Flat Washers
(3) 1/2" Hex Nuts view full answer...
The 4-way round connector is very rare and the 6-way round is somewhat common but more rare than 4-way flats and 7-ways so what that means is that we don't have an adapter for your configuration but I have a similar solution. We have a version of the Custer Wireless Tow Bar Light that uses a 7-way blade with the part # LIW-LDTL-7B which we do have adapters for like with the # 337TC1067P which plugs into your 6-way and converts to same connector as the tow bar. view full answer...
There are 2 metal rings welded to the Curt Trailer Hitch, part # 11130, on each side of the receiver to attach safety chains. You will have to reach up behind the bumper fascia to connect the safety chains.
For safety chains, we have 48 Inch Long Safety Chain, part # 2114-553-04. For quick links to attach the chains, we have the Safety Chain Quick Link, part # C82932.
Instructions and a video installation of the Curt Trailer Hitch # 11130 are linked. view full answer...
Go To Results