The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13220 is the only confirmed fit we have for your 2005 Porsche Cayenne. Although this hitch is confirmed to fit other models, the other models are not confirmed to fit with your bumper. The Draw-Tite hitch # 75950 has not been tested on your vehicle according to the manufacturer so I cannot confirm the fit. There are support parts of the hitch that stick out differently than the Curt Hitch so it would be a gamble but it may... view full answer...
We do have a few different tire chain options from Konig that will fit and offer rim protection for the 265/45-20 tires on your 2019 Porsche Macan.
For a standard set of chains you'll want the XG12 Pro # th2004705265. These drape over the tires like normal and then it fits and uses plastic pieces to protect the rim.
The next step up is the Easy Fit # th04115265 which drape over the tire as well, but this is has an easy on/off system so that you won't be messing with the chain for very... view full answer...
Konig Self-Tensioning Snow Tire Chains # TH2004705265 do fit the 265/40-21 size tires on your 2016 Porsche Macan and they also fit over a dozen other tire sizes too. These chains use a diamond-shaped pattern on their cross chains that tends to provide better sideways grip. All chains that fit your size tires are shown on the linked page.
Before purchasing and installing chains I recommend checking your printed owner's manual for guidance and/or restrictions for using tire chains on your... view full answer...
The only option for your 2019 Porsche Cayenne without any factory rails is the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. These use vacuum cups to install on the roof of your vehicle and come with 48" crossbars. view full answer...
I checked with Stealth Hitches and the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit part # SH37FRT is a confirmed fit for the 2019 Porsche Cayenne Hybrid. The Stealth Hitch is an excellent option which does not require any permanent modifications such as cutting, trimming or drilling. The best part of all, it has a removable receiver tube so the hitch will not be noticeable once installed. It also comes with everything you need so you will be ready to go once it arrives. view full answer...
to add a brake controller to your 2015 Porsche Macan, if you do not have them already, I recommend the Curt Trailer Hitch Receiver Item # C13136 and the ZCI Circuit Protected Vehicle Wiring Harness Item # 119250KIT. This wiring harness does not require splicing into factory wiring. I have include a link to a video on a 2017 Porsche Cayenne to give you an idea of how it installs. The color of the wires and routing it may be a little different for your vehicle.
In order to use a brake controller... view full answer...
Since we do not sell the OEM wiring harness that was factory installed in your 2015 Porsche Macan you can determine its amperage capacity by checking with your dealership or by seeing what value fuse is associated with it. It is NOT likely that the wiring harness can deliver 40-amps especially if the vehicle uses low-power-demand LED lighting.
You'll also want to confirm the actual power draw from the lift's motor; is the 40-amps continuous or peak current draw? Tri-Lift offers several... view full answer...
There is a rooftop basket that will work for you, but the Inno Shaper 80 will not fit the Yakima channels. Instead, a great rooftop cargo basket option that will work for you is the Thule Canyon XT Roof Cargo Basket # TH859XT.
This basket has U-bolts which you can clamp around the bars and it will give you a carrier that measures 49" long x 40" wide x 6" tall and has a fairing to reduce the wind noise. It can be locked onto your rails with the One-Key System Lock Cylinders # TH450400. view full answer...
Our team here at etrailer has installed and tested the SeaSucker Hornet # 298-BH1302 on your 2008 Porsche Cayenne. I went ahead and contacted SeaSucker for a second confirmation, and they confirmed that the Hornet will work with the shape of your rear hatch. The safety strap will install into the seam of the trunk on top. view full answer...
Interesting question! My tech contact at Custer said their LED Strobe Driver # STR-QRLY should work just fine wired in upstream of the existing load resistors like # DI34ZR. So the wiring sequence would be strobe-resistor-LED. view full answer...
The Autowbrake Electric Brake Controller part # 3430001 is an excellent option for a 2016 Porsche Cayenne. In regards to parts needed, there would be no additional components for the Cayenne assuming it did in fact come with a factory tow package. If you take a look at the rear of the vehicle you should see a round trailer connector with seven pins inside which would indicate you do indeed have the factory tow package.
In regards to the trailer, you would simply use ring terminals if... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75940 will fit your 2021 Porsche Macan S. It looks like Draw-Tite recently (December 2021) updated their fit list to include the 2021 model and if you check out the attached clip from the linked instructions you can see that there are provisions for cutting the fascia on the S model.
If you are planning on towing with this vehicle then you need wiring like the ZCI Wiring Kit # 119250KIT and a ball mount kit like part # 989900.
If the purpose... view full answer...
With the Stallion Aluminum Car Hauler Ramp Set - 72" x 14-1/2" - 6,000 lbs - Qty 2 # 288-07503 having a combined weight capacity of 6,000 pounds, they look to be ideal for your application. These are also 11-3/4" wide, so your 10" wide tire will fit perfectly. With the ramps we currently have on offer, I really don't think there is a better option that these. view full answer...
As long as your 2016 Porsche Macan is not a GTS model, you can use the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" # SH84FRT to tow your bass boat. You will need this version of the stealth hitch because the other model is just for bike racks or cargo carriers.
Your 2016 Porsche Macan has a towing capacity of 4409 lbs and the stealth hitches have a 600 lb maximum tongue weight and 6000 lb maximum trailer weight. With your trailer and boat at 3200 lbs... view full answer...
You will need a trailer brake controller to use any electric brakes on your trailer. The Curt Echo Wireless Trailer Brake Controller # C51180 is going to be the easiest trailer brake controller for you to use. It plugs into the 7-way on your 2021 Porsche Macan s and allows you to use your smart phone as the controller. It will work on trailers with 1 or 2 axles. view full answer...
If you already have a 2" hitch receiver like the Draw-Tite Max-Frame Hitch # 75950 you have a lot of choices for bike racks, but if you are looking for a trunk rack then the Thule OutWay 3 # TH56BV will work. I do recommend not getting a trunk rack for your 2013 Porsche Cayenne just because it can cause damage to your paint. I stay away from trunk mounted racks as much as possible, but all my vehicles already have hitches on them. If you did decide to get the hitch, the Thule Helium # TH44VR... view full answer...
You will need two of BaseClip Fit Kits, # Y06163. The kit comes with two pads and two clips in each box.
If you are using our fitguide to look at the roof rack kits it breaks everything down to show the exact quantity of each item you will be receiving with the roof rack kit. All together you need four clips and four pads to attach the Baseline Roof Rack Towers # Y28TR to your Cayenne. The Yakima JetStream Crossbars # Y00426 are a good fit to complete your roof rack kit.
I have attached... view full answer...
For a trailer hitch receiver that only has the 2 inch opening showing at the back of your 2017 Porsche Macan I suggest the Draw-Tite Max-Frame Class III Hitch Receiver # 75940. There is some fascia trimming so I would check with the dealership since the car is leased. view full answer...
I recommend using the Stealth Hitches Hidden Rack Receiver # SH84FR which is confirmed to fit your 2023 Porsche Macan T. This will give you a 2" removable receiver so you will not have the end of the receiver exposed like you get with the Draw-Tite # 75940 when you are not carrying your bikes. If you feel you might also tow a trailer you can get the Kit # SH84FRT which I see you found as it includes the Towing Kit # SH79FR. The towing kit includes a ball mount and the wiring needed to operate... view full answer...
Yes, the Curt Trailer Hitch Receiver part # C13116 has been tested and is a confirmed fit for your 2018 Porsche Cayenne E-Hybrid. This is a Class III hitch with a 2" receiver tube opening. It is made in the U.S.A. and comes with a lifetime warranty.
The installation of this hitch is also very straightforward. The rear bumper will need to be temporarily removed for installation but there will not be any drilling required. This makes for a very concealed look as you can see in the attached... view full answer...
Go To Results