For your 2010 Mustang V6, you will need the Draw-Tite Trailer Hitch, part # 24840. The hitch will bolt up to the frame of your Mustang, but since you have a Boss rear bumper, additional trimming of the bumper fascia may be required.
The Draw-Tite Hitch # 24840 is a Class I 1-1/4 inch hitch. You will want to make sure not to exceed the towing and tongue weight capacity of the hitch or vehicle as stated in the vehicle owners manual. If you will be using the hitch for hitch mounted accessories... view full answer...
For your 2016 Ford Mustang fastback with Curt hitch # C11405, the MagnaFlow Competition Series Cat-Back Exhaust System - Stainless Steel - Black - Gas # MF19256 or the Stainless Steel # MF19345 will not have any issues fitting. There will actually be more room than the factory exhaust. view full answer...
The Curt Class I 1-1/4 Inch Hitch, part # C11312, will fit a 2006 Ford Mustang GT as long as it is a V6. That is the way you can determine for sure. If your GT is a V8, it will not fit.
If you have a V8, please let me know and we can explore trunk racks for you. The Saris Guadian # SAR93FR, for example, is a confirmed trunk mounted bike rack for your GT. view full answer...
The best bike rack will depend on which hitch and vehicle you have since on some vehicle's the receiver is further under the bumper than others.
It looks like you were looking at bike racks for a 2014 Ford Mustang, and a 2016 Ford Edge.
The only hitches I can find for a 2014 Mustang are Class I, which limits which rack can be used as most racks are only for Class II and up. For this vehicle I recommend the Kuat NV 2.0 Base 2-Bike Platform Rack # BA12B which will work with a Class I 1-1/4"... view full answer...
The recommended maximum speed rating for the Thule Self-Tensioning, Low-Profile Snow Tire Chains # TH2004205117 is 30-40 mph. This is fairly standard for tire chains.
With your aftermarket tires these chains are going to be your best bet since they only require 9 mm of clearance between the tires and your 2006 Ford Mustang. You're going to want to make sure you have the space before purchasing anything.
Also, be sure to consult the vehicle owner's manual for specific information on... view full answer...
Good news! The Draw-Tite trailer hitch # 24928, which is a confirmed fit for your 2016 Mustang, is going to give you a Class I 1-1/4 receiver opening that will be compatible with the Kuat 1-1/4 platform racks. We know that this hitch needs 5-1/2 inches for bumper clearance when choosing a bike rack.
The Kuat Sherpa 2.0 2-bike platform rack for 1-1/4 hitches # SH12G (Gray) # SH12P (Pearl) # SH12B (Black) will be compatible with your 2016 Ford Mustang. These racks when folded up will... view full answer...
I spoke with my contact at Draw-Tite and he stated that hitch # 24863 should fit the 2013 Ford Mustang GT500, all V8 models. They have not yet heard of any problems with the fit. There is no trimming required. I have included a link to the installation instructions for you to view.
If you plan on doing some towing the hitch does not come with the ball mount. You will need part number 3594. For a 1-7/8 inch ball you can use # 19256 and for a 2 inch ball use # 19258. view full answer...
I spoke with my contact at Magnaflow and he told me that the Cat-Back Exhaust System, # MF15815, will fit the convertible model of the 1966 Ford Mustang with the 4.7L V8, but a slight modification will be necessary for the installation.
The convertible models have an extra support bracket in the rear that may contact the exhaust pipes or muffler. When installing this system on a convertible model, you will need to install a spacer between the support bracket and the exhaust system to prevent... view full answer...
You are correct that vehicles like your 2005 Ford Mustang Convertible that have an OEM rear spoiler can pose a challenge to the fit of a trunk-mount bike rack. Fortunately, the folks at Hollywood Racks have designed racks that are specifically intended for such applications.
The Hollywood Racks Over-the-Top 2 Bike Carrier # HRF2 and the 3-bike version # HRF2-3 are designed to work with such vehicles without putting stress on the spoiler, which really is not intended to bear any weight.
The... view full answer...
In a situation like this there are a lot of variables, like bike rack, bikes, tow dolly, car on dolly, etc, so there is no easy way to figure this out. It is going to take a bit of measuring and basically mocking the situation to see if a set-up will work for you while cornering.
Let's start with the tow vehicle. Using the Curt Multipurpose Ball Mount, # D210, and for this example I am going to use our Kuat Beta Bike Rack, # B202-2, the furthest bike is going to be approximately 30-1/2... view full answer...
There are some tow bars that will fit Roadmaster or Blue Ox base plates using an adapter. But I would have to know the brand and model of the tow bar to be sure.
For example, adapter # RM-032 will allow you to use Roadmaster base plates with Demco Aluminator, Excali-bar and Kwik-Tow and Ready Brute Elite tow bars.
Adapter # RM-025 will allow you to use Roadmaster base plates with Draw-Tite (2480), Reese (74950), Valley, EAZ-Lift and Tow Ready (63180) tow bars.
Adapter # RM-038 will... view full answer...
The Curt trailer hitch # C11041 will fit 2003 Mustangs with V6 engines. Since your 2003 Ford Mustang Mach 1 version is a V8, we don't have a hitch that will fit.
If you want to carry bikes with your Mach 1, we have a trunk mounted bike rack, the Saris Guardian # SAR93FR. I included a video of this bike rack for you to check out. view full answer...
I spoke with my contact at Draw-Tite and the Draw-Tite Class I Trailer Hitch, # 24863, will fit on your 2012 Ford Mustang Boss 302.
If you are looking to add a trailer hitch to your vehicle to carry a bike rack, then you may want to take a look at the Swagman XTC-2 Platform Bike Rack, # S64670. This is our most popular bike rack which allows you to easily mount two bikes and will leave plenty of room for you to access your trunk.
This hitch does not include the ball mount. You will need... view full answer...
I spoke with my contact at Draw-Tite and they said that the Draw-Tite Class I 1-1/4 Inch Hitch, part # 24863, will fit a 2011 Ford Mustang convertible. This hitch has a gross towing weight capacity of 2,000 lbs. and a tongue weight capacity of 200 lbs.
Some items you may need to complete your Class I towing setup are the Draw-Tite Ball Mount, part # 3594, the Tow Ready 2 Inch Hitch Ball, part # 19258, and the Tow Ready T-One Wiring Harness, part # 118487. I am including a link to the installation... view full answer...
Technically, the Curt trailer hitch # C11405 will fit a 2015 Ford Mustang GT Convertible but it is only listed for Coupe models so I would not recommend it. Like you said, the Draw-Tite hitch # 24928 fits convertible and regular models and it is the hitch I would use. I have linked a video showing installation for you.
If you want to do some towing the correct ball mount is # 3594 and for a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And to add a 4-Way trailer connector... view full answer...
Yes, you will be able to use the Roadmaster Classic Base Plate Kit, item # 443-3, with your BlueOx tow bar on your RV. There is an adapter, item # RM-033, that will be needed to connect the Base Plates to the Blue Ox tow bar. We have a Base Plate Adapter Table, see link, that you may find very informative.
In addition, if you would like to easily remove the adapter from the base plates, you will need a set of the Roadmaster Tow Bar Quick Disconnects, item # RM-201.
If you click the provided... view full answer...
While the Curt part # C11312 has not been tested to fit your 2008 Ford Mustang with aftermarket exhaust like what you have there is a chance it could still fit. If your aftermarket exhaust retains the factory dimensions and routing (or close to it) then it could work.
I did a little research online and was able to determine that most people were able to install this hitch with aftermarket exhaust.
The most popular 2 bike hitch mounted bike rack we sell with other owners of 2008 Ford Mustangs... view full answer...
With the Curt Trailer Hitch, # C11312 installed on your 2005 Ford Mustang V6 with dual exhaust, you will be able to use any ball that is compatible with your ball mount. If you don't already have a ball mount, you could check out the Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K # 3593. The # 3593 uses a ball with a 3/4-inch shank diameter. A compatible 2-inch diameter ball would be # 19258. Make sure to stay within the towing limits of the car or trailer... view full answer...
Here is how we know Curt trailer hitch # C11405 will fit the 2018 Ford Mustang EcoBoost:
The 2015 to 2018 Mustangs are all part of the same generation. Other hitches that fit the 2017 model year also fit the 2018 thus the Curt hitch will also fit. We have heard from customers that you may have to make some modifications to their exhaust by moving the clips of the sensor back in order to reattach everything with the Curt hitch installed.
But if it were me I would go with the Draw-Tite... view full answer...
I checked with Yakima and they do show the Yakima HangOut 3 Bike Rack - Trunk Mount - Adjustable Arms Item # Y02638 as a fit for your 2004 Ford Mustang GT with the rear spoiler. I have included a picture showing what it might look like on your Mustang. If your spoiler looks like the one in the picture then it will work. If it looks different email me some pictures and I can determine what will fit. view full answer...