Adapters to Use Roadmaster or Blue Ox Base Plates with Different Tow Bars

Question

Question:

Can after market tow bar fit base plate have tow bar from tractor supply

asked by: Craig H

0

Expert Reply:

There are some tow bars that will fit Roadmaster or Blue Ox base plates using an adapter. But I would have to know the brand and model of the tow bar to be sure.

For example, adapter # RM-032 will allow you to use Roadmaster base plates with Demco Aluminator, Excali-bar and Kwik-Tow and Ready Brute Elite tow bars.

Adapter # RM-025 will allow you to use Roadmaster base plates with Draw-Tite (2480), Reese (74950), Valley, EAZ-Lift and Tow Ready (63180) tow bars.

Adapter # RM-038 will allow you to use Roadmaster base plates with Duncan Towmatic II, Karbar, EazAligner 2000 tow bars.

Blue Ox adapter # BX8833 allows you to use Blue Ox base plates with Reese, Valley and Draw-Tite tow bars.

Adapter # BX88297 will allow you to use Blue Ox base plates with Ready Brute Elite tow bars.

expert reply by: Michael H

0

Answer 1

We do have the components needed to flat tow your 2021 Ford Bronco Wildtrak. The first thing needed is a base plate kit like with the part #RM92ZR which is custom fit for your vehicle and a very easy to use setup. In addition to the base plates,…

view full answer...

Answer 2

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 7

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Adapters to Use Roadmaster or Blue Ox Base Plates with Different Tow Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching