The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle 2006 Ford F-250 and F-350 Super Duty part # AL88291 does not require drilling into the truck frame for installation. However the kit that comes with this part number is designed to work only trucks with B&W Fifth wheel under bed kits 1105 or 1199R. If you do have the 1199R the upper B&W bracket will need to be ground down a bit to install the air bags. The only drilling that will need to be... view full answer...
Anytime that you use tire chains there is a possibility that may slightly scratch your wheels if they are not installed correctly. The Titan Chain part # TC2327 is designed with color coded connection points so as long as they are on the tire correctly they barely touch the actual wheel. This tire chain provides the best fit and easiest install for the tire sizes of 275/45-22, 275/55-20, or 275/65-18 on a 2018 Ford F-150. I have attached a video for your reference. view full answer...
I checked with the manufacturer and am happy to confirm for you that the Curt Front Mount Trailer Hitch Receiver # C31068 will absolutely fit your 2011 Ford F-150 SVT Raptor. This is a no-drill installation that will give you the 2" receiver you are looking for on the front of your truck.
I have added a link to the instruction manual for you to check out as well. view full answer...
The MagnaFlow Ceramic Catalytic Converter part # MF49575 is a direct fit catalytic converter which means it will only fit Ford Explorers and Mercury Mountaineers from 2002 - 2004 with the 4.0L V6 engine. Therefore, the MagnaFlow Ceramic Catalytic Converter will fit six different vehicles. view full answer...
Yes, the Thule Snug Tite Hitch Lock and Anti-Rattle Device part # THSTL2 will work with the Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier part # TH665C. The weld nut inside the shank on the Thule Transporter is the same as that on the Thule bike racks. If you want to be sure that the lock cores on the cargo carrier and hitch lock are the same you can also order the Thule One-Key System Lock Cylinders part # TH450200. view full answer...
Yes, the SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251 will work on your 2017 Ford Expedition with adjustable pedals. However, there are special instructions in the manual for installation on vehicles with adjustable pedals which I have attached for you below.
"Special attention must be given to vehicles with adjustable pedals. Check for proper clearance in all positions. When adjusting the cable, be sure that the pedals are positioned closest to the driver’s seat. This... view full answer...
I wish I had better news for you but Sidewinders will only replace specific pin box models, and there are no Sidewinders that will work as replacements for a Atwood 34 pin box so you will need to use a sliding hitch.
If your F-150 has a 6-1/2 foot bed but you have the fixed (non-sliding) Curt A16 5th Wheel Trailer Hitch # C16120 you can convert it to a sliding hitch with just the Curt R16 Round Tube Slider # C16560.
Otherwise, if your F-150 has a 5-1/2 foot bed the only option is the... view full answer...
We do carry a hitch that could work but none of the available custom trailer hitches like part # E98842 fit the cab and chassis/cutaway models of the 2016 Ford Transit T350. They are all just for the regular cargo van/passenger van models.
I recommend Curt adjustable width trailer hitch part # 13703. The adjustable width of the hitch is designed to extend from 22" to 72" wide. Cab and Chassis models are normally 34 inches wide so this hitch likely fits your frame. Since it is not a custom... view full answer...
It sounds like you are asking what has changed in regards to the B&W Companion Fifth Wheel Hitch # BWRVK3300 compared to the B&W Companion Fifth Wheel Trailer Hitch # BWRVK3500-5W and the answer is in fact the base, like you were asking.
The base on the B&W Companion # BWRVK3300 is designed to fit directly in the puck system of Ford F-250, F-350 and F-450 Super Duty trucks from 2011 through the 2019 model years (this is as of 2019). I added a photo showing the legs from this hitch and... view full answer...
Yes, you certainly can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 22292 with your Reese Brakeman brake controller in your 2013 Ford F-150. view full answer...
The front mount trailer hitch I recommend for your 2005 Ford F-350 is the Curt Front Mount Trailer Hitch Receiver part # 31114 because it is made in the USA and currently our most cost effective option for a front mount hitch. I called Curt and they were not sure of where you were measuring to get a 37" frame but if you measure the distance between the two innermost mounting points (see photo) on the front end plate of your frame rail, you should get 31" and if you do the above will work... view full answer...
Yes, you are on the right track with what you are trying to accomplish. You will want to have the Fastway e2 Weight Distribution # FA92-00-0800 set for the weight of just the travel trailer.
Then you can use the Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers # AL88385 to adjust the ride height with the golf cart loaded. These will provide a much smoother ride than the Timbren # TFRTT1504E since the air pressure is adjustable to dial in the ride height and quality. I... view full answer...
It's a good idea to check to ensure you get the right fit, and I can confirm for you the correct Blue Ox base plate and Blue Ox tow bar fit for your 2012 Ford F-150. The exact parts you need are going to depend on the model of your F-150 and if you have the EcoBoost engine or not.
- With EcoBoost Engine - FX2, FX4, Lariat, Platinum, XL, XLT: Blue Ox Base Plate Kit # BO74FR
- Without EcoBoost Engine - Harley-Davidson, STX, XL, XLT: Blue Ox Base Plate Kit # BX2606
- With or Without EcoBoost... view full answer...
The only available front mount trailer hitch option for a Jayco Greyhawk on a 2014 Ford E-450 Cutaway Chassis is the Draw-Tite Front Mount Trailer Hitch Receiver part # 65053 which is a direct bolt-on fit. view full answer...
The inflation valve if faulty can be replaced with the Firestone Inflation Valve for 1/4" Tubing part # F3032-1. If you have a valve core removal tool you can make sure the stem inside is tight. It could be a failed o-ring on this component depending on where the leaks are coming from. view full answer...
Cables instead of chains are a good idea if you don't plan on using them often, or have them "just in case" because they are a more economical option, and I can confirm for you that the Glacier Cable Snow Tire Chains # PW2029C you asked about do fit your 245/55-19 tires.
Tensioners will give you a nice tight fit, and for an economical option that will work I recommend the Glacier Rubber Adjusters # PW99.
I have added a link below to a video review for you to check out as well of the Glacier... view full answer...
Yes, the Curt # C31083 Front Mount Hitch is a confirmed fit for your 2021 Ford F-150 truck.
Not only will this make boat ramp launching and recovery easier and maneuvering travel trailers into tight spots, but you can also add accessories like a Curt # C18065 bike rack for 5 bikes. For specific items just email me back.
Also, to keep grit, grime, road salt and bugs from jamming in there when not in use grap an etrailer # 22282 rubber hitch cover. view full answer...
On the B&W # BWRVK3370 Companion 5th Wheel Hitch, the distance from the rear puck connector to the back edge of the hitch is 7-1/2" and I have attached a graphic illustrating this. In your truck bed, go to the rear puck mounts and from the center of one of those measure backwards towards the cab 7-1/2" and then you can see how much space is left for an auxiliary gas tank.
The B&W Companion that you are considering is the hitch I recommend most often. The B&W Companion hitches are widely... view full answer...
Yes, the Pro Series 5th Wheel Trailer Hitch with Rails and Installation Kit, # PS30128, does include all of the parts needed to install the included 5th wheel trailer hitch in your 2000 Ford F-150. The installation kit that comes with it is the Universal Kit, # RP30035. I have included a link to the installation instructions for you to view. I have also included a link to an FAQ article on 5th wheel trailers and installation kits. view full answer...
For your 2010 Mustang V6, you will need the Draw-Tite Trailer Hitch, part # 24840. The hitch will bolt up to the frame of your Mustang, but since you have a Boss rear bumper, additional trimming of the bumper fascia may be required.
The Draw-Tite Hitch # 24840 is a Class I 1-1/4 inch hitch. You will want to make sure not to exceed the towing and tongue weight capacity of the hitch or vehicle as stated in the vehicle owners manual. If you will be using the hitch for hitch mounted accessories... view full answer...
Go To Results