The Kuat Beta, # B202-114, will fit in your 2010 Acura TL. This rack will fit in a Class I, 1-1/4 inch receiver, which is what your vehicle has.
Beta
Holds 2 Bikes
Does not come with Bike and Hitch Lock
Weighs 12-3/5 pounds
Capacity of 100 pounds
What you will need to measure is the distance from the center of your hitch pin hole to the furthest point at the rear of the vehicle that may interfere with a bike rack. This rack measures 10-1/2 inches from the... view full answer...
According to Yakima, the FullBack 3 will indeed fit your 2006 Acura TL.
To carry womens bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # Y02531 is recommended. The adapter spans the distance between the seat post and the handle bar gooseneck, and provides a level attachment point to the bike rack so the bike has greater ground clearance and is not carried at an angle. view full answer...
I'm certainly sorry to hear that someone kicked off the driver's side mirror of your 2007 Acura TL, though I can verify for you that the mirror you asked about is a fit for your car, and it is indeed for the driver's side:
- K-Source Replacement Side Mirror # KS63030H
If you also wanted the passenger's side that part is # KS63029H. view full answer...
The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs, # RR-RUSL, is a universal fit that will work with standard square crossbars. In the installation details, which I've attached, you will simply use #4 for Clamp A and #5 for Clamp B and will use the inner holes for both.
For your 2002 Acura TL, The SportRack Semi-Custom Roof Rack, # SR1002, is a confirmed fit that uses standard square crossbars. This rack will allow you to use the Rhino-Rack Load Assist.
I've... view full answer...
The Glacier Cable Snow Tire Chains # PW1038 you referenced will work for your 2007 Acura TL and are easy to install and comply with all Department of Transportation use. The typical tire size for your car is 235/45-17. If your tire size is different, I can recommend another set of chains for you or you can check out our tire chain fitguide to see what tire chain works for the size of tire your vehicle has. I have posted a link to that page.
I have also included a link to a video showing... view full answer...
Yes, the Thule OutWay 2 Bike Carrier # TH45JV is a confirmed fit for your 2012 Acura TL. I checked with Thule to confirm this also.
If you plan on carrying women's or alternative framed bikes you might also be interested in purchasing a Thule Bike Adapter Bar # TH982XT. I attached a review video for this product for you to check out also. view full answer...
I would recommend the Glacier Cable Snow Tire Chains, part # PW1038, which are SAE Class S tire chains. You will also want to use Glacier Rubber Adjusters for Class S Snow Chains, part # PW100 as tensioners for part # PW1038.
You will want to mount the snow chains on the powered drive wheels of your vehicle, on your TL you will mount the snow chains on the 2 front wheels.
I have linked 2 FAQ Articles on snow chains, one of which outlines the snow chain laws for each state. I have also... view full answer...
I did some checking and it looks like the Draw-Tite Sportframe Trailer Hitch # 24755 that you referenced will fit on a 2006 Acura TL with a factory A-Spec lip kit. I also found out that Acura does not recommend you tow at all with this vehicle and I could only safely recommend you carry a bike rack.
I attached an installation video for this product for you to check out also. view full answer...
The K-Source Panoramic Mirror, Part # KSRM012, is intended as a universal fit item that will fit a majority of original equipment mirrors. If the rear view mirror of your Acura TL is between 2-1/8 and 2-7/8 inches tall and no thicker than 3/4 of an inch, the K-Source Mirror, part # KSRM012, will fit.
Please refer to the attached photo which illustrates the back side of the mirror and its spring-loaded mounting clamps. These clamps expand from 2-1/8 to 2-7/8 inches.
This mirror uses a... view full answer...
The Draw-Tite trailer hitch # 24755 is designed to fit all models, including the Type S, of the 2007 Acura TL. I have included a link to the installation instructions and a link to a video showing a typical installation for you.
This hitch comes with a ball mount, pin, and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # C56231. I have included links to the instructions and a video for the wiring as well. view full answer...
It looks like all the hitches we offer for a 2008 Acura TL fit all models of the vehicle. That indicates that there is no difference in the design or mounting positions on the different models. So, yes, the Draw-Tite Class I Trailer Hitch Receiver, part # 24755, will fit your 2008 Acura TL Type S. view full answer...
While you could use a Class I compatible 4 bike rack like # TH9025XT in the hitch on your 2005 Acura TL, you would be limited to 2 bikes when using the rack. This is because vehicles with Class I hitches can be damaged by the weight of the bikes being placed to far away from the back of the vehicle. The amount of torque that is applied to the hitch and vehicle frame is increased substantially as weight is added farther away form the vehicle. The only benefit would then be the ability to... view full answer...
The Clazzio Custom Seat Covers - Black # AL-EAACB0011BK referenced in your question are confirmed to fit your 2004 Acura TL. While we do not have any available pictures of the cover installed in your vehicle, this is a confirmed fit per the manufacturer.
The covers will simply slip onto the seats for a quick and easy installation using the hook-and-loop fasteners, straps and S-hooks. These are designed to fit over the original seat material, so I do not recommend removing the original... view full answer...
The Thule OutWay # TH45JV is a fit for your 2008 Acura TL. Since the top and bottom legs and the arms all move independently of each other, you will be able to fine tune the fit so that you will not have the problems that you are having with your current bike rack. I have included a link to a video review of this rack for you.
You could also consider an adapter bar to help you mount the bike on the rack. You can use Thule adapter bar # TH982XT or one of the others shown on the linked page.... view full answer...
The only roof rack available for the 2003 Acura TL that provides 125 lbs of weight capacity is the SeaSucker brand. The other brands offer 25-35 lbs less capacity. I was not able to find the roof capacity of the Acura TL in the owner's manual. It says to contact the dealership for more information on how much weight the roof can handle. It is a good idea to find this information out before carrying kayaks.
I recommend SeaSucker Monkey Bars part # 298-SX6000B because this setup gives you... view full answer...
Transmission coolers are not vehicle specific; all you need is enough space to fit the cooler. I recommend checking out the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13502 which measures 11" wide x 7-1/4" tall x 7/8" deep and will work for you so long as you have the space and your 2003 Acura TL has a 3.2L V6 engine.
I've added a link to a video review and install video of this cooler for you to check out as well. view full answer...
We have not had the opportunity to install the Curt Hitch # C11290 on a 2003 Acura TL, so this measure is not available. If you could measure from the hitch pin hole to the outer most part of the bumper with the hitch that you currently have, I can see if we have a rack that would fold using your current hitch. Also knowing which bike rack you have now would be helpful. view full answer...
Your Rhino-Rack Roof Rack with square euro bars # RREB126B for your 2004 Acura TL will work with the Thule AirScreen Fairing # TH82WV. The particular Rhino-Rack square bars on your vehicle have the same dimensions as Thule's square bars, 1-1/4 x 7/8 inches. This fairing is compatible with square bars of that size.
I have attached a review video of this fairing for you. view full answer...
The Hollywood Racks Trail Rider 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount # HR200Z comes with the bike and hitch lock to secure the rack to the hitch receiver. If you look at the attached instructions, you will see the hitch pin, keys, and lock cylinder. If you need to replace that hitch pin lock you can use the Hollywood Racks Threaded Hitch Lock for 2" Hitches # HRLHPT which is a fit. You will need to insert the pin through the aluminum spacer first then through the... view full answer...