I looked up the owner's manual for your 2020 Nissan Pathfinder and it gives all of the specifications and how to check for proper loading, and weight capacities, you can find it on page 10-17 - 10-22. The maximum tongue weight for your Pathfinder is 600 lbs, which is 10% of the max towing capacity 6000 lbs. So unfortunately since the total weight is over 600 lbs, I cannot recommend it, if you can shave 21 lbs off the carrier or the bike it would be within the manufacturers limit. I think... view full answer...
I spoke with my contact at Ark and he sent me a dimensional drawing of the mounting bracket that the Extreme Off-Road Trailer Jack w/ Dual Wheels # ORJW500D has. The dimensions are in millimeters. view full answer...
To add a set of crossbars to the raised side rails on your 2023 Nissan Pathfinder's roof, I recommend the roof rack by Rhino-Rack which includes the following parts:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4 item # RRSX100
This aero bar roof rack system has a 165 lbs capacity. The included locks will help to prevent theft and the rubberized vortex strips... view full answer...
Yes, we do. To add a hitch to your 2023 Nissan Pathfinder, I recommend the Curt Trailer Hitch item # C46DR. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver.
I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like once installed.
If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.
I also... view full answer...
You can use a larger than needed cargo bag on a cargo carrier like what you mentioned. Basically you'd have more cargo room available than needed but as long as you secure the bag down well it won't be an issue at all.
You can use a cargo net like the part # C18200 which will easily keep the excess bag and cargo secured. Basically you'll just stretch the net over the bag and it will hold everything in place. I attached a review video for this net for you to check out as well. view full answer...
We have several roof rack options for your 2015 Nissan Pathfinder with a naked roof, and these can be seen on the page I linked for you. Please note that all of these racks have 59-inch crossbars.
I recommend the Rhino-Rack Vortex black bar system made of parts # RRVA150B-2, # RRRLKVA and # DK407. This racks offers a high 165-lb weight capacity, aerodynamic elliptical bars that will make less noise than most other shapes and it offers excellent compatibility with rooftop carriers. You... view full answer...
The top tube rail of the 24x60 Reese Cargo Carrier # 63153 measures 3/4" x 3/4". I have confirmed this with my contact at Reese for you.
To install this in your hitch receiver you will also need a hitch pin/clip # PC3 or a locking hitch pin like part # 63232 which also comes with an anti-rattle device to help reduce the play of the carrier in the hitch receiver. view full answer...
My contact a Lippert Components confirmed with me that the mounting bracket on the Lippert Solera Slide-Topper Awning, # LCV000163287, measures from the center of the top rivet hole to the bottom of edge 1.050 inches.
The bracket will mount as close to the top trim of the slid out on you trailer, so from the bottom of this trim to the bottom of the mounting bracket will be no more than 1 to 1.5 inches. This will be enough clearance for the slider to mount to the slide out between the... view full answer...
The Replacement Attachment Strap for Thule Roof Mounted Watersport Carriers # 853-5467 is a loop that when pulled tight measures 23-1/2 inches in length end to end. view full answer...
On part # HTCC2008 the distance from the rear surface of the emblem to the forward-facing edge of the hitch pin hole (the edge closest to the driver) is 3-1/8-inches. The distance from the rear surface of the emblem to the rear-facing edge of the hitch pin hole is 2-1/2-inches. These dimensions will vary slightly by manufacturer.
The Dallas Cowboys 2-Inch NFL Trailer Hitch Receiver Cover # HTCC2008 from Great American Products is USA-made and features a die-cast zinc emblem mated to a... view full answer...
From the bottom of the flange to the very top of the ball will indeed be 2-3/4". This can vary slightly between manufacturers and ball size though, but the typical 1-7/8" ball ( # 19256) will measure +/- 2-5/8" tall, the typical 2" ball ( # 63845) will measure +/- 2-3/4" tall, and the typical 2-5/16" ball ( # C40030) will measure +/- 3-1/8" tall.
With that said, you should not be relying on the height of the ball to figure out how much rise or drop you need. This should be done by measuring... view full answer...
The Curt Echo Wireless Brake Controller item # C51180 is controlled through an app on your phone and does not require a connection to a brake controller wire. I am guessing that's what you mean by a traditional brake box and under dash adapter. All you will need to add to your 2008 Nissan Pathfinder is the Curt T-Connector Vehicle Wiring Harness item # C56226 you mentioned. This 7-way harness works with the Pathfinders that came with the towing package.
I have linked a couple of installation... view full answer...
I recommend using the Thule WingBar Evo setup for your 2005 Nissan Pathfinder:
47" WingBar Evo Crossbars - Black # TH711220 or Silver # TH711200
Evo Raised Rail Feet # TH710401
Lock Core Kit - # TH450400 (optional)
This has a weight rating of 165 lbs which will be enough to support the weight of your clam shell camper when empty. The 165 lb rating is called the dynamic rating which means when the vehicle is in motion. The static rating (when the vehicle isn't moving) will be higher and... view full answer...
From the mounting surface of the trailer the # UF48-979013 would attach to down to the bottom of the wheel measures 6.77 inches.
You would need to compare that measurement to your setup to determine if that would help keep your trailer from dragging adequately. view full answer...
The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 referenced in your question weighs in at just about 47 pounds.
This is a really nice and unique bike carrier mount that will attach to the A-frame of your trailer tongue. It features a sturdy, all-steel design and has a weight capacity of 100 pounds. It is compatible with 2 inch hitch-mounted bike racks that are approved for use behind an RV, such as the excellent Swagman Platform-Style 2 Bike Rack # S64663.
I... view full answer...
The shipping weight of the Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 is 36 lbs.
I can also confirm it fits your 2013 Nissan Pathfinder, as shown in the linked installation video. view full answer...
The thickness of the Derale Low-Profile Sandwich Adapter # D25772 that you referenced is 1 inch and the diameter of the # D25772 is 2-15/16 inches across the width of it.
I did some research and it looks like the oil filter for you 2001 Nissan Pathfinder has the same thread size of 20 mm x 1.5 mm. view full answer...
In the answer you referenced the Expert is referring to the capacities of the hitches only. The towing capacity of your 2013 Nissan Pathfinder will not increase with a hitch installed. The vehicle capacity is whatever is stated in the vehicle owner's manual. You will always go by the lowest rated component in the system. So, for example, if the vehicle is rated for 5,000 pounds and the hitch # 76031 is rated for 6,000 pounds you are still limited to 5,000 pounds even though the hitch is... view full answer...
To add a set of crossbars to the roof of your 2024 Nissan Pathfinder, I recommend the roof rack by Rhino-Rack which includes the following parts:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4 item # RRSX100
This aerobar roof rack system has a 165 lbs capacity. The crossbars attach directly to the raised rails that come from the factory installed on you Pathfinder. view full answer...
Yes, we do have a Rhino Rack roof rack for your 2023 Nissan Pathfinder. It will attach directly to your side rails by clamps and does not require cutting or drilling to install. You will need the following parts:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4 item # RRSX100
This aero bar roof rack system has a 165 lbs capacity. The included locks will help... view full answer...
Go To Results