Yes, it would. The snap pin that comes with the Demco Slide-Lok Trailer Coupler item # DM05557-81 has a 1/4" diameter so the etrailer Adjustable Trailer Coupler Latch Lock item # e98883 would be your best option. view full answer...
On the Pro Series Adjustable-Channel Coupler, # PSA256S0303, the back of the coupler that fits in the channel mounted to the trailer measures 2-7/8 inches wide. The bolt holes are 2 inches apart on center. Mounting hardware is included with this coupler.
You can use Bulldog 5-Position Adjustable Channel Bracket, # BDAC5000300, or Bulldog 3-Position Adjustable Channel Bracket, # BDAC3000300. view full answer...
You are on the money because the distance between the mounting holes of Trailer Coupler # CTA-400 is 2 inches on center, like you mentioned. You are also correct that this is a standard distance and will allow you to use a number of different adjustable channels, depending on the adjustment you need.
The most common channel brackets for this coupler are the Ram 3-Position Adjustable Channel Bracket for Couplers - 6" Height Adjustment # CTA-CB4 or 8" Height Adjustment # CTA-CB6. The coupler... view full answer...
To get the full capacity of the Pro Series Adjustable-Channel Coupler # PSA256S0303 there shouldn't be any space between the coupler and the channel like the part # BDAC5000300.
You can either torque the coupler down more to take up that gap if that is reasonable, or you can use washers like you referenced. view full answer...
I reached out to Demco to get the bolt hole spacing on the Demco Channel Tongue Trailer Coupler # DM13203-52. The bolt holes measure 3/4 in from the top of of the coupler to the center of the hole. This is the same measurement for the distance from the bottom of the coupler to the center of the lower bolt hole. I have attached a photo showing these measurements.
For this coupler there is not an adjustment for the tension on the hitch ball. I confirmed this with my contact at Demco. The... view full answer...
The Master Lock Adjustable Trailer Coupler Lock, # 2847DAT, is designed to fit coupler latch widths from 5/8 inches up to 2 inches wide. In all likelihood, it will fit your coupler. I recommend measuring to make sure. If you get a width that is less than 2 inches and has a hole for a lock that is 1/4 inches or less in diameter, this lock will fit. I have included a link to a video review of this lock for you.
I have also included a link to all of the coupler locks we carry. view full answer...
There are three sizes of hitch ball that are all in the same general size ballpark: 1-7/8-inch, 50mm and 2-inch. If your coupler has an adjustment option that may do the trick, but if not you may want to replace the coupler with one that does indicate the correct ball size. This is typically stamped on the coupler as a safety requirement (thank you for checking your coupler for this information). We do offer coupler rebuild kits but nothing for Hadco.
Our range of couplers is shown on... view full answer...
The Bulldog Cast Head Coupler with Wedge Latch is made to fit the Bulldog 3-Position Adjustable Channel Bracket part # BDAC3000300. The inside width of this bracket is 2.81 inches or 2-13/16 inches. view full answer...
The maximum extended height for Bulldog gooseneck coupler # BD0289600300 is 40 inches. The inner tube cannot safely extend beyond that. Since you are building a trailer you can position the outer tube to the frame in a location that will best fit your height needs so keep that in mind as well. view full answer...
The depth of the Titan 3-Position Adjustable Channel Bracket # T0897800 is 2-1/8 inches, which is the standard for these channels and the same, for example, of the Buyers Products 3-Position Channel # 337B8978.
If you need a coupler you can use the Titan Trailer Coupler # T1882000, or you can get the coupler and 3-position channel together as one with the Titan Trailer Coupler with 3-Position Adjustable Channel # T2330900.
I've added some links below to video reviews for you to check... view full answer...
The outside width of the channel used with the Bulldog Cast Head # BDA2005C0317 Adjustable Coupler is 3.620 inches, which is slightly under 3-5/8 inches. view full answer...
Yes, the coupler lock included with the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT will work for your horse trailer. The cylinder adjusts from 9/16" to 2-3/4" along the shank so 2-1/4" won't be a problem. view full answer...
The overall width of channel mount coupler # CTA-280 where it attaches to a channel is slightly less than 3 inches to fit a 3 inch bracket such as # CTA-CB126 which has an inside width of 3 inches. I have linked videos of both of these parts for you.
In your picture the width of where the coupler mounts to the channel is actually slightly wider than where you are measuring so it does appear that you have the standard 2-7/8 inch wide coupler. All of the channel mount couplers we carry have... view full answer...
On the Pro Series Adjustable-Channel Coupler, part # PSA256S0303, the center to center bolt hole measurement is 2 inches and it accepts 5/8 inch diameter bolts. The width of the coupler and the size channel it fits is 2-7/8 inches.
This coupler is designed to fit the Bulldog 3-Position Adjustable Channel Bracket, part # BDAC3000300, and the Bulldog 5-Position Adjustable Channel Bracket, part # BDAC5000300. The bolts needed would be the Pro Series Mounting Bolts for Adjustable-Channel Couplers,... view full answer...
I went out to the warehouse to measure the mounting holes on trailer coupler # CTA-400. They measure 0.66 inches in diameter. This coupler does come with the mounting hardware as well. I have included a link to a video review of this coupler for you. view full answer...
The Ram Gooseneck to 5th Wheel Trailer Coupler Adapter, part # KPG5-R30IP, fits most standard round gooseneck outer tubes. The Pin Hole Diameter is 7/8 inches and the Adjustment Holes, center to center, are 2-11/16 inches apart, giving it a Range of 8 inches for Vertical Adjustment. The Tube Diameter is 4 inches and the Plate Dimensions are 9-7/8 inches long and 9-7/8 inches wide. view full answer...
The overall length of the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 30K item # KPG5-R30IP is 29". It is 14" from the top of the tube to the first adjustment hole. I have attached a diagram detailing these measurements. view full answer...
The best solution for you may be an adjustable ball mount. This type of ball mount will allow you to adjust the rise or drop so you can tow different trailers level. I have attached a link to all of our adjustable ball mounts for you to check out.
If you do not want to use an adjustable ball mount, then to determine which ball mount will work best for your situation, you will want to take a few measurements on your truck and trailers. The first measurement that you will want is the hitch... view full answer...
Without knowing the coupler height of your Camper or the receiver height you have to work with, it'd be hard to say but I can tell you how to figure it out.
The fact that the trailer has a 6 inch frame with an underslung coupler won;t change the procedure to determine what sort of drop is needed for the weight distributing shank which would be about the same procedure for determining the rise/drop of ball mount needed. You'd measure the height of the receiver by measuring downward from... view full answer...
The distance between the side mounting holes on the Demco Slide-Lok Trailer Coupler - Adjustable Channel Mount - Black - 2" Ball - 7,000 lbs item # DM05823-81 is 2" on center. view full answer...