What Size Channel Does Bulldog Cast Head Adjustable Channel Coupler Fit

Question

Question:

What width channel does this coupler fit? Have 2 7/8 inside on jlg 1014 trailer.

asked by: Dave K

0

Expert Reply:

The Bulldog Cast Head Coupler with Wedge Latch is made to fit the Bulldog 3-Position Adjustable Channel Bracket part # BDAC3000300. The inside width of this bracket is 2.81 inches or 2-13/16 inches.

expert reply by: Patrick B

0

Answer 1

The bolts for channel mount coupler #CTA-400 have the markings for grade 8 bolts. They are 5/8 inch coarse threaded bolts so the minimum torque value is 159 and the max is 212 (foot pounds). Once torqued down the force will cause the metal of the…

view full answer...

Answer 2

The etrailer and Pro Series A frame jacks will use 3/8 inch bolts, which is the standard size for A frame jacks and couplers. For install details and some product demonstration videos, click the provided links.

view full answer...

Answer 3

The bolts that come with the Pro Series Coupler part #PSA200S0303 are the part #PS024202 which are 5 inches long and 5/8 inch diameter.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

What Size Channel Does Bulldog Cast Head Adjustable Channel Coupler Fit

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching