The two parts you are looking at differ slightly in design/size and are actually for different bike racks. For example, the Replacement Anti-Sway Cradle # TH8523486001 is for Thule Raceway TH9001XT and TH9002XT while the Replacement Anti-Sway Attachment # 852-3037-001 is for Thule Apex TH9025, TH9026, TH9027, Thule Helium TH9042, and TH9043. If you can tell me which bike rack you have then I would be more than happy to track down the correct part. view full answer...
You will lose some ground clearance with the 2" trailer hitches from Draw-Tite # 75673 and the Curt # C13206 as opposed to the 2" trailer hitch from EcoHitch # 306-X7601 on your 2018 Subaru Outback Wagon. This is due to the sleek design that EcoHitch is known for.
The EcoHitch is a bit more difficult to install, but if ground clearance is what you are concerned about there is no better option.
I have attached some installation videos for all 3 hitches as well as some photos that you... view full answer...
The Curt Trailer Hitch Receiver part # C67JR and EcoHitch Hidden Trailer Hitch Receiver part # EH34FR are both excellent options for a 2020 Subaru Outback. I recommend the Curt hitch because it will be easier to install, is more cost effective, and has a higher towing capacity. They both offer a bolt-on install and hidden design.
I have attached an install photo of the Curt hitch for you as well. In regards to install cost, the professorial install time is listed as 45 minutes for the... view full answer...
The Curt Trailer Hitch Receiver # C13410 will look better on your 2012 Subaru Outback Wagon than the Curt Trailer Hitch Receiver # 13390. Since the # C13410 has a hidden cross tube less of the receiver is visible.
When it comes to installation most will likely prefer the # 13390 as it does not involve removing the rear fascia to fit the receiver behind the bumper impact structure.
As you mentioned both receivers have the same rating of 600lbs tongue weight and trailer rating of 4,000lbs. view full answer...
The Rhino-Rack Vortex StealthBar Roof Rack # JA7970 actually has rubber coated stainless steel straps which secure it to the raised rails on your 2023 Subaru Outback Wilderness. So you won't have issues with the straps failing. If you are only using your rack for a roof basket the Rhino-Rack is a great option. I do prefer using the Thule Rack # TH96FE, # TH69SC if you are constantly changing your roof mounted accessories. With the Thule having the 2-piece channel seal you will not have... view full answer...
Thanks for the nice words, and let's start with fit; I did check with the manufacturers and can confirm that all three roof-mounted bike racks you mentioned - the Thule UpRide Roof Bike Rack # TH599000, Yakima HighRoad Roof Bike Rack # Y02114, and Yakima FrontLoader Wheel Mount Bike Rack # Y02103 are each a confirmed fit for the factory roof rack on your 2018 Subaru Outback.
Let's start with the Yakima, and the difference is that the HighRoad is the newest version of the FrontLoader -... view full answer...
The Curt # C13206 is a quality hitch with good customer reviews. It used to fully made in the USA but now is only assembled here. The Curt has the crosstube hanging below bumper as well so you will see it once installed. I added a video review for more detailed information. view full answer...
I can't tell you the exact height of each roof rack from the roof of your 2022 Subaru Outback Wagon, but I can tell you approximately how much higher they are from the top of the factory rails.
Thule WingBars - Adds approximately 3-1/8"
Thule WingBar Evo Crossbars # TH711320
Evo Raised Rail Feet # TH710401
Rhino-Rack Vortex - Adds approximately 2-3/16"
49 inch Vortex Aero Crossbars # RRVA126B-2
SX Series Legs # RRSX100 view full answer...
Hidden Hitch no longer manufactures the hitch for your 2010 Subaru Outback, but I will do a comparison for you. Draw-Tite and Hidden Hitch were essentially identical in style and capacity. The price of the Hidden Hitch model was higher because the hitch included the manufacturer recommended ball mount and the pin and clip used to secure the ball mount into the receiver.The Draw-Tite hitch is a quality hitch and is available in a Class II, # 36493, or Class III option, # 75673.
The Curt... view full answer...
The Curt # C67JR and EcoHitch # EH34FR vary based on the manufacturer testing. The EcoHitch tongue weight is higher based on the design of the hitch and the testing that was performed by the manufacturer. This is the same for the Curt, but based on this design and testing the # C67JR is only rated for 350 lbs.
More than likely this will not make a difference between them since you will be limited by the capacity of your 2022 Subaru Outback. Make sure to consult your owner's manual for... view full answer...
For your 2020 Subaru Outback Wagon we have two trailer hitch options at this time (December 2019). However, a trailer hitch designed to fit the frame of a 2019 Outback Wagon, like # 75673, will not fit the frame of your 2020 model.
If you plan on only using the hitch for non-trailer loads, like a hitch mounted bike rack or cargo carrier, you will want to go with the Stealth Hitches Rack Receiver # 391SUOB20. To tow a trailer, you will need to use the Stealth Hitches Tow Package # 391SUOB20T... view full answer...
The difference between the Stealth trailer hitches for the 2020 Subaru Outback is simply that one is used for accessories like a bike rack, while the other is designed for towing a trailer.
The Stealth Hitches Rack Receiver # 391SUOB20 comes with a 2 inch receiver which is only to be used for accessories. The receiver (pictured) cannot be used for towing, it is for people who want a hitch to use with a bike rack like the Hollywood Racks Trail Rider 2-Bike Platform Rack # HR200Z.
If you... view full answer...
There isn't a Thule CK-7 tire chain so between the CG-9 and the CS-10 I believe the CS-10 would be better for you since it has ice breakers built into the chains and will install much easier.
The Thule CS-10 tire chain has an external quick release system, they are self tensioning (just put them on and go), they have 10 millimeters clearance inside and on the tread, they feature a diamond pattern with icebreaker reinforcements for added grip, they have anti-scratch nylon bumpers to protect... view full answer...
The two Draw Tite hitches that fit your 2022 Subaru Ouback Wagon part numbers # DT94YR and # DT73RR have different advantages but the best in my opinion is the part # DT94YR as it has a mostly hidden appearance due to only the hitch opening hanging below the rear bumper which also helps with ground clearance. But it's doesn't install quite as easily as the # DT73RR which also has the higher towing capacities. view full answer...
I wish I had exact figures I could provide you with but this information is not easily accessible. Unfortunately, the returns due to fitment are mostly related to shipping. The boxes can become damaged depending on how they are treated upon arrival to the customer so there are many variables at play, ones that could not be accurately predicted. If the trailer hitch does arrive and it does not quiet line up, most of the time a slight bend is all that is required so you won't be stuck waiting... view full answer...
The Yakima Hold Up part # Y02445 for 1-1/4 inch hitches would not be any more or less stable than the 2 inch version of the rack, part # Y02443. Either would work great depending on what size hitch you have.
The best way to pick between the two would be to go with the one that is designed to fit the hitch you have on your vehicle. I attached a help article on hitch sizes for you to check out as well. view full answer...
The lightest trailer hitch for a 2015 Subaru Outback Wagon is the Curt Trailer Hitch Receiver part # C13410 at around 27 lbs follow by the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76227 at about 30 lbs. I think these are both great options because of the hidden cross tube but personally prefer Curt over Draw-Tite. view full answer...
In my opinion, if given the choice between the Swagman XC, # S64650, and the XTC, # S64670, I would go with the XTC every time. The upgraded wheel loops and rubber straps better secure the bikes than the wheel loops alone on the XC.
The XTC can also handle bikes with a wider wheelbase, up to 66 inches. The XC can only handle up to a 51-1/2 inch wheelbase. These features are very useful and the extra security of the straps on the wheel loops add peace of mind and functionality. I have... view full answer...
# C67JR is the part number we use for the Curt 13494 Class III hitch. Same exact part, different number. The hitch is indeed a fit for the 2021 Subaru Outback.
If you'll be towing with your hitch, you'll need a few other items to complete your towing system, such as a trailer wiring harness like # 118467 and a ball mount like # 2753. For a trailer ball, use # 19260 for a 1-7/8 inch or # 63845 for a 2 inch.
I've linked to installation instructions and videos for the hitch and the trailer... view full answer...
The difference between the two kayak carriers are the type of crossbars they mount on. The Rhino Rack Nautic # RR571 is compatible with round, square, aero, elliptical, and most factory crossbars by clamping on. The Rhino Rack Nautic 581 # RR581 is compatible with crossbars that have a bar or T-slot channel. I've added links to video installs of each product so you can see the difference.
As for a spacer, it would depend on how tall your crossbars are, and though you may be able to do... view full answer...
Go To Results