Yes, the Rhino-Rack Steel Mesh, Roof Mounted Cargo Basket # RLBH-S280 that you referenced has been confirmed to fit square or aero shaped crossbars like what your 2006 Scio xA has so it would work for you.
I attached a review video for this product for you to check out as well. view full answer...
Regarding extra wear to your Scion XA from flat towing, I have not heard any feed back about that concern. You may want to consult with your Scion Dealership Service Advisor. Regarding how to prepare your Scion for flat towing, the best advise will be in your owners manual. It is pretty straight forward.
The parts you will need to flat tow your 2006 Scion XA are as follows.
You will need a base plate kit unique to your vehicle. We offer two, and while the Blue Ox is currently lower... view full answer...
You could install a dimmer switch provided that the switch is rated for use in a 12 volt system and that you can find the proper size dimmable bulbs. We do not carry any dimmable bulbs that would work. Technically any incandescent bulb could be dimmed but some are designed for it and would last longer.
The only dimmer switches we carry are designed for Vision X LED lighting systems and would not work. view full answer...
I checked with Yakima and to mount the KingJoe bike rack Y02620 or another model KingJoe to the 2006 Scion xA you will not need the glass hatch hook. You will just use the straps as they are.
For the 2007 Toyota Yaris sedan it is the same; no glass hatch hook accessory required to mount the KingJoe bike racks! view full answer...
We have all of the components you'd need to flat tow your 2005 Scion xA AND the prices will be below on the product links.
First thing you'll need is a base plate kit. For that you'd want the # 1170-1 which is confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup... view full answer...
Because this tow bar has a built-in cable guide, I would go with the straight cables, part RM-645. The coiled cables might be a little hard to thread through the cable guide. view full answer...
The Thule OutWay # TH45JV is definitely the bike rack I recommend and it will fit both your 2004 Scion xA and 2005 Saturn Ion sedan. I actually own the 3-bike version of this rack and it is the best trunk mount I have used, hands down.
My favorite feature is the retractable cables. They make installation fast and easy. My wife is on the short side (5 foot 3) and she does not have a problem using this rack. I have included a link to a video review of this bike rack for you to view.
Since... view full answer...
I spoke to my contact at Roadmaster and they do not offer replacement vehicle side mounting brackets for vehicles. You will have to purchase the complete Roadmaster XL Base Plate Kit, # 1170-1, for your new vehicle.
The reason is a safety concern, and a fit issue. For safety they want to make sure no parts that were in an accident are reused, and the drawbars may not be correctly sized to fit in a new base plate receiver. view full answer...
The Curt trailer hitch receiver, part # C11488, is confirmed to fit your 2003 Scion xA and is a Class I hitch with a 1-1/4 inch opening. This means you will need hitch adapter that expands to 2 inches in order to use your current bike rack. You need to know first that using an adapter does decrease your hitch's tongue weight capacity by 50 percent.
From my research your Scion isn't rated for towing at all so there really isn't a defined tongue weight. Check your owner's manual to see... view full answer...
The Thule Gateway Pro Bike Carrier # TH88VR that you referenced is confirmed to fit your 2006 Scion xA. As long as it is installed correctly it should be plenty sturdy and would not fall off.
I attached a review video and installation instructions for this product for you to look over.
However, if you are looking for the most secure bike rack we offer that is confirmed to fit your vehicle you should take a look at the Thule OutWay Bike Carrier # TH45JV. This rack uses rubber coated straps... view full answer...
The Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2 features a 1/2" pin diameter and is compatible with 1-1/4" and 2" hitches, however it is meant to be used with Thule hitch mounted racks. Most bike racks require a brand specific pin because they are threaded and the threads are usually different between bike racks. Since your Sportworks bike rack is older, none of these brand-specific bike rack hitch pin locks are guaranteed to fit your bike rack. I also reached out to Thule... view full answer...
According to my research, a 2004, 2005 or 2006 Scion xA can be flat towed if it's equipped with a manual transmission. Automatic transmission-equipped vehicles must be towed using a tow dolly like part # DM9713093. I'd recommend you consult your owner's manual for confirmation.
To flat tow the vehicle, you'll need base plates, a tow bar, safety cables, a wiring solution so the vehicle taillights work along with those of the motorhome and a supplemental braking system.
For a base plate,... view full answer...
The Curt Class I Receiver Hitch # C11488 is the only available trailer hitch that is confirmed to fit your 2006 Scion xA. This is a very nice Class I hitch that will provide you with a 1-1/4 inch receiver opening and a 200 pound tongue weight capacity.
Curt does require that stabilizing straps like # 18050 be used on non-trailer loads such as a bike rack. This is a requirement from Curt on their Class I and Class II (and some Class III) trailer hitch receivers. It is not an indication... view full answer...
For your 2006 Scion xA we have the Curt hitch part # C11488 as a confirmed fit that has a tongue weight rating of 200 lbs. So with the weight of your bikes as long as your bike rack weighs less than 60 lbs this hitch would have the needed capacity. view full answer...
There are a few basic items you will need to tow a trailer. First, you will need a trailer hitch. For a 2004 Scion xA I checked with Curt and they do list trailer hitch # C11488 as a fit. Next, you will need a ball mount, hitch pin, and clip. The recommended ball mount is # C45521. For a pin and clip use # PC2.
For a ball it will depend on what the rental trailer coupler requires. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # C56175. I have... view full answer...
My technical contact at Roadmaster advised that there are two potential causes for the red light to remain lit on your Even Brake # RM-9400. One possibility is that the unit is too close to the brake pedal and is pressing it. The other possibility he noted is that you did not wire into the cold side of the brake light switch, which is necessary to tell the unit that the pedal is pressed. view full answer...
According to the Thule Fit guide the # TH78VR is a fit with 2004 through 2007 Toyota Scions, so it definitely is a fit for your 2006 Scion xA.
As you may know Thule has had a reputation of manufacturing great products that are engineered for daily use. They are also test fitted on a variety of vehicles and stringently tested before being put into production.
The Thule Gateway Pro has recently been redesigned therefore not as many reviews are available of the current production. That... view full answer...
Transmission and oil coolers are an excellent method to reduce stress on a tow vehicle. Coolers will generally prolong the life of the protected engine systems.
Since I do not know what model year xA you have I checked online manuals for several model years (the Xa was produced in 2004, 2005 and 2006). I could not find any confirmed towing capacity for the vehicle. I also contacted Scion by phone and was advised that the xA is not recommended by Scion for towing any trailer of any weight.
For... view full answer...
The Blue Ox base plate kit that fits your 2006 Scion xA part # BX3754 weighs 37 lbs. You'll also need a tow bar that's compatible like the part # BX7380 which is the Blue Ox Alpha that weighs 46 lbs.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you... view full answer...
All Roadmaster Base Plate Kits like the XL Base Plate Kit, item # 1170-1 that you purchased, place the brackets at 28-1/2 inches apart on the vehicle. If your cross bar is the incorrect width you will need the Roadmaster Quick Disconnect Tow Bar Base Assembly, item # 910021-00.
This dimension should work correctly with the Falcon 5250 Tow Bar as long as the crossbar is the original crossbar for Roadmaster base plates. You can measure your crossbar to determine if it is correct.
If your... view full answer...
Go To Results