I spoke to the technicians over at Hopkins and the Brake Buddy Select 3 # HM39524 will still work without the controller. The accelerometer that actuates the braking system is located in the actual braking box itself. That being said, you will not be able to adjust the intensity of the brakes or have the manual override function. I suggest replacing the controller # HM39505 at you earliest convenience. view full answer...
From the research I did it looks like your 2003 RV M6342LX Workhorse is a Dolphin built on the W22 chassis. For a front sway bar you would want the # RM-1259-106 and for the rear the # RM-1259-109. view full answer...
I have a replacement option for you, but we reached out to Blue Ox and unfortunately since the Blue ox Aladdin tow bar BX4325 has been discontinued for a few years there is not a replacement arm available.
Instead I recommend replacing your tow bar with the Blue Ox Ascent Tow Bar - Motorhome Mount - 2" Hitch - 7,500 lbs # BX4370 which has the same 7500lb weight capacity as your Aladdin and is overall easier to use since it has an easier telescoping arm setup. view full answer...
The Roadmaster Reflex Steering Stabilizer # RM-RBK13-RSSA will provide you with some stability on your 2007 Workhorse W22 motorhome, but a rear anti-sway bar is the best ways to provide stabilization for your motorhome. The reason is because they are such a vast improvement over the OEM sway bars and their placement at the rear of the vehicle allows for the greatest improvement in handling. After that, the best way to increase your rig's handling and comfort is with a front anti-sway bar,... view full answer...
The start capacitor # FR45FR is designed to store energy that will allow you to start your AC unit when there is not enough power available otherwise; I suppose it's similar to a soft start like you've referred to. Whether or not you can run 2 AC units at the same time on a 30A feed, you may have enough juice to run them, but starting them is the challenge and will depend on your coach's power management system. I'll also say that you'll have a better chance with 13,500 btu units than you... view full answer...
There certainly is! For your Class A motorhome on the 2007 Workhorse W16 chassis, you'd need the # RM-RBK8-RSSA Reflex Steering Stabilizer. I've confirmed the fit with my contact at Roadmaster. view full answer...
The thicker the diameter of the anti-sway bar the better it's going to preform. The Roadmaster Rear Anti-Sway Bar # RM-1259-108 has a 1-1/2" bar diameter and the Roadmaster Rear Anti-Sway Bar # RM-1259-109 has a 1-3/4" bar diameter.
This means that the # RM-1259-109 is going to be slightly better at minimizing the sway and body roll you feel when traveling on the highway or when making tight turns.
Note: If your 2003 Itasca Winnebago Suncruiser has Firestone Ride-Rite air bags then... view full answer...
I checked with Air Lift and they confirmed that the kit only fits the 2002 and newer W20. We do have a Timbren kit part # TGMRP30 that fits your 2001 W20 which would give you the same support but has advantage of not requiring you to monitor air pressure. view full answer...
For your 2008 Workhorse W22 motorhome what you'd want for a front sway bar and steering stabilizer is the Roadmaster Front Sway Bar and TruTrac Rod Kit part # RM-1259-106 which comes with the front bar and a TruTrac rod which acts as a steering stabilizer to keep the front axle in line and prevent it from veering around due to irregularities of the road's surface. view full answer...
There are several things you can do to improve the handling of your Workhorse W-24. The biggest improvement will be adding a rear anti-sway bar. Adding additional items like a front anti-sway bar and a steering stabilizer will improve the ride and handling as well.
For your motorhome I recommend the Workhorse W-Series Roadmaster Rear Anti-Sway Bar, part # RM-1259-109. The anti-sway will help reduce fatigue and helps make it easier to keep the RV level and on the road.
For a front anti-sway... view full answer...
Not all SumoSpring kits install the same. The part # SSR-280-54-1 that you referenced though does not require drilling unlike others.
I attached a set of install instructions for you to check out as well. view full answer...
For your 2005 Fleetwood Southwind built on the Workhorse W22 Chassis you'll need the Mounting Bracket # RM-RBK13, and then the Steering Stabilizer # RM-RSSA.
There isn't a pre-made kit for your specific vehicle, but these are the two components that would be in the kit. view full answer...
Adding front and rear sway bars are an option, though they might be more than you are willing to spend. For a front bar, you can use # RM-1259-105 or # RM-1259-106. For a rear bar, you can use # RM-1259-108.
You could also install a steering stabilizer, # RM-RBK13-RSSA. It will work to keep the motor home centered so that the driver does not have o work as hard.
I have included links to the instructions for part # RM-1259-106 and part # RM-1259-108 for you. view full answer...
Your 2007 Fleetwood Bounder is built on a Workhorse W Series chassis so for a steering stabilizer you would want the part # RM-RBK13-RSSA which is a confirmed fit and would work well.
The sturdy steel spring on this stabilizer keeps your vehicle in line by constantly working to maintain its position. Mount it between the steering mechanism and the chassis for a tight connection that will minimize wander and correct oversteering. view full answer...
I spoke with Lippert and they said the Kwikee Electric RV Step Complete Assembly, 40 Series, # LC3726892 will be a direct replacement for the Coach Steps 725-0043. It will be a bolt-on install for replacement of the steps. view full answer...
It sounds like your 2003 Pace Arrow 37A has switches in 2 places on the coach to allow you to control the water pump, which won't be an issue with the Seaflo Diaphragm Pump for Boats and RVs - Variable Flow - Up to 5.5 GPM - 1/2" MPT - 12V # SE24FR. You'll install this unit just as it was connected to your old water pump.. In regards to the "quick connect" hose fittings, I'm not aware of a water pump that offers those included and I believe it's something you would have to come up with... view full answer...
For your 2003 Workhorse W22 the recommended rear sway bar is the part # RM-1259-108 which is a 1-1/2 inch diameter bar. This will work great and would not be a compromise in any way. view full answer...
The Timbren front kit part # TWFRW22 that fits your 2005 Workhorse W22 is much stiffer than the # SSF-280-47 you have now. If stiffer and more supportive is what you want this would be the way to go. If you are wanting a softer ride though this is probably not going to be it. view full answer...
While we don't currently have any Blue Ox branded suspension enhancement for your Thor Four Winds Hurricane on a Workhorse W18 Chassis we do have the following Roadmaster enhancements:
Roadmaster Front Anti-Sway Bar # RM-1259-115.
Roadmaster Rear Anti-Sway Bar # RM-1259-118.
Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK8-RSSA.
We also carry a front anti-sway bar with a TruTrac Rod which will give you better control of the side-side and... view full answer...