Curt has told us that their hitch part # C11254 fits all models of the 2016 Hyundai Veloster so it would work on the Turbo Rally Edition as well. view full answer...
For your 2015 Hyundai Veloster the Curt Hitch part # C11254 is a confirmed fit and would work well for carrying a cargo carrier. You will need to use the stabilizer strap part # 18050 with this hitch when the carrier is installed as Curt requires the use of a stabilizer strap with this hitch when carrying a non-supported load. The biggest carrier we have that fits a Class I hitch like this is the Reese part # 63155 which measures 20 inches by 47 inches. This carrier has a rise shank of... view full answer...
Your 2013 Hyundai Veloster can be fitted with two types of bike carrier, a trunk-mount type and a hitch-mount type. Each offers certain advantages and disadvantages
The benefits of a hitch-mount rack are that the vehicle's sheet metal does not have to carry the combined weight load of the rack and bike, something for which it was not really designed. This helps reduce the potential for damage to its finish. Tilting-type hitch racks also allow for better access to your rear hatch and their... view full answer...
According to Roadmaster, the # 521633-1 base plate kit is a fit for the Turbo model of the Veloster.
There will be a small amount of grille trimming needed. The base plates can be used with a Blue Ox tow bar by using the # RM-032 adapter.
I will send you a copy of the install instructions in a separate email. You can look them over and decide if the installation would be something you would be comfortable undertaking.
My research indicates that a Veloster with the 6 speed manual transmission... view full answer...
Proper bow and stern tie-downs will keep your canoe from sliding back and forth on a roof rack. First, when the canoe is placed on the roof rack, you should secure it to the roof rack crossbars using tie-down straps that wrap around the canoe from one side to the other. these will keep the canoe from sliding side to side.
Next, you will want to be sure your bow and stern tie-downs are properly situated. They should both be pulling down and in. If you have both bow and stern tie-downs... view full answer...
The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to use, and because the rack has an angled shank that would raise the bike rack up by three inches providing additional ground clearance. Because of that, this is the rack I'd recommend for you. The rack includes an anti-rattle hitch bolt, but a combination anti-rattle hitch lock/cable lock is available separately as part # S64031.
This rack can accommodate bikes with wheelbases that are up to 66 inches... view full answer...
Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180.
The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR. view full answer...
If you click the link I attached under help info heading you will see the installation instructions for the Roadmaster Base Plate kit part # 521633-1 that you referenced. view full answer...
Starting with the trailer hitch, the Curt Class I Round Tube Receiver Hitch # C11254 that you referenced is confirmed to fit your 2016 Hyundai Veloster and will work well. This Class I hitch will provide you with a 1-1/4 inch receiver opening and features a towing capacity of 1,000 pounds. I also recommend verifying the vehicle's capacity by checking your copy of the owner's manual. You will always need to follow whichever limit is lower, the vehicle's or the hitch's.
One thing of note... view full answer...
The Blue Ox # BX2334 base plate kit is compatible with your 2012 Veloster as well as your Aladdin tow bar.
You'll need a few other items to tow your vehicle:
• Safety cables like # RM-643
• Diode wiring kit, such as part # RM-15247
• Supplemental braking system like Blue Ox Patriot # BLU37TR
• Possibly a high/low adapter if the 14.5 inch installed height of the base plate has a height difference of
more than 3 inches compared to the receiver on the motorhome.
I'd highly recommend... view full answer...
The only other solution we have to carry a bike at the rear of your 2016 Hyundai Veloster is with a hitch like the Curt part # C11254 and a hitch mounted bike rack.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three. Check out the review video I attached for more info.
If you plan... view full answer...
Since trailer wiring is not reversible to allow it to be used in a flat towing setup you'd have to go with tow bar wiring that does fit your 2016 Hyundai Veloster.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your... view full answer...
For your 2019 Hyundai Veloster we have the SeaSucker Monkey Bars Roof Rack # 298-SX6000B that will work perfectly.
I really like this particular roof rack system because it uses unqiue vacuum cups that will attach directly to any part of your Veloster's roof, allowing you to easily customize the space between the bars for different size cargo items as well as remove or re-install the rack in a pinch. The thermoplastic cups also won't scratch or dent the surface of your brand new vehicle... view full answer...
The Kuat Beta Folding 2 Bike Aluminum Rack part # B202-114 and Swagman Titan 2 Bike Rack part # S63400 are both great options for a 2016 Hyundai Veloster with a trailer hitch like the Curt Trailer Hitch Receiver part # C11254. That said, I recommend the Kuat Beta because it's super lightweight at about 12 lbs so it will be easy to take on and off the vehicle. The Swagman Titan 2 weighs around 30 lbs. The Kuat Beta also has a higher weight capacity as well which is 40 lbs per bike. view full answer...
To put it simply, no. You're not going to be able to carry a dirt bike in any manner using your 2017 Hyundai Veloster.
Because of the limited tongue weight capacity of the Curt Trailer Hitch Receiver # C11254 you wouldn't be able to use a motorcycle carrier like the etrailer # e98873 to carry a dirt bike. This Curt hitch has a tongue weight rating of 100-lbs, which is the amount of weight that the hitch can handle pressing down on it, to put it simply. Because of the limited tongue weight... view full answer...
The SeaSucker Board Carrier part # 298-BX1806 is a valid option for any vehicle in which a roof rack is not available for or even cases where roof racks are available. The SeaSucker has the advantage of being easy to remove and install as well as cutting down on cost since there is not an additional rack required. view full answer...
To add trailer wiring to your 2013 Hyundai Veloster you will need wiring harness # C59496. I have included a link to the installation instructions for you. view full answer...
Yes, the Curt Hitch part # C11254 that you referenced has a 1,000 lb maximum trailer weight rating. If the trailer you plan on towing is less than 1,000 lbs and has a tongue weight of less than 100 lbs then this hitch would work well for you.
To complete your towing setup you may also be interested in the Wiring Harness Part # C59496.
Curt Ball Mount part # C45521, Hitch Ball with 1-7/8 inch diameter part # A-80, and # A-82 for a 2 inch ball may also interest you. view full answer...
The only available trailer hitch that is confirmed to fit your 2014 Hyundai Veloster is the Curt Class I Round Tube # C11254. This Class I hitch features a 1-1/4 inch receiver opening and has a 100 pound tongue weight capacity. I have attached an installation video on your Veloster that you can use for reference. Please note that Curt does require that a stabilizing strap like # 18050 be used for any non-trailer load.
The Draw-Tite Class III Max-Frame Trailer Hitch Receiver # 75579 that... view full answer...
I'd recommend the Roadmaster Falcon All Terrain Tow Bar, part # RM-522. The non-binding and self-aligning arms mean that you won't need to make sure the car is perfectly lined up behind the vehicle and the pavement or ground is flat as a pool table. The tow bar has a 6000 lb capacity, which will work perfectly for your Hyundai Veloster and is fully compatible with your existing Roadmaster Base Plates.
I've linked you to a product demonstration video featuring the Roadmaster Falcon All-Terrain... view full answer...
Go To Results