Since your trailer is working correctly with another vehicle the problem most likely lies in the wiring of the Grand Caravan. Turn the tail lights on and use a circuit tester, item # 3808 if needed, to check the trailer connector. If the taillight circuit is not working, you will need to follow the wiring back into the vehicle until you find the converter, the black box that the trailer wiring is coming out of. Test the brown wire on the trailer side of the converter. If the wire is working... view full answer...
The first thing we need to do is narrow down where the problem lies. Disconnect part # 30717 from the 4-Way that was originally in place. Using a circuit tester like part # PTW2993, clip the ground wire to the exposed post on the 4-Way and have someone apply the brakes. Stick the probe on the circuit tester into the post that is attached to green or yellow wire. If you get signal, reconnect part 30717. If you do not get signal, something is wrong with the wiring on the vehicle
As you face... view full answer...
A hitch for a 2007 Dodge Caravan is not compatible with a 2007 Dodge Charger. I have included a link to a page that have all the hitches that are available for a 2007 Dodge Charger so you can see some of the differences between them and the hitch you have on your Caravan. view full answer...
Yes, the T-One harness part # 118300 that you referenced is a confirmed fit for your 2006 Dodge Caravan with or without the stow away seat. view full answer...
You will need to check your owners manual, or with the Chrysler dealer to determine the towing capacity of your 2005 Dodge Caravan. Once you know the capacity of the vehicle you will need to find a camper that weighs less than the vehicles maximum towing capacity, when fully loaded, to safely tow the trailer.
If you need a hitch for your Caravan, I would recommend the Draw-Tite Class III Trailer Hitch, item # 75119, if your vehicle does not have stow-n-go seating. If you do have stow-n-go... view full answer...
We definitely have the parts you need to flat tow your 2000 Dodge Caravan using your Roadmaster Falcon 5250 tow bar! For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter.
Here are the parts I recommend using:
Roadmaster Crossbar-Style Base Plate Kit - 4-Cylinder # 242-1 or 6-Cylinder # 242-2 engine
Safety Cables - # BX88196
Heavy Duty Magnetic Tow Lights - # TL21RK
Brake... view full answer...
If you are asking me if there is a Curt wiring harness for your 2007 Dodge Caravan there is one. It is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C55537. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the tail lights.
I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118300 you were looking at over the Curt. Tekonsha makes a far superior product and their... view full answer...
If you have the newer 53" Thule SquareBars # TH712400 then you can use the Rapid Traverse Feet # TH480R and Fit Kit # THKIT1043 for the naked roof on your 2000 Dodge Caravan. If you have the older Thule square bars that don't have the T-Slot opening on the underside then you would need the discontinued Thule Traverse foot pack which is available individually as part # TH75222479002. The fit kit # THKIT1043 would still be used in this case as well.
If you'd like to add locks to the roof... view full answer...
Currently Timbren only offers their Springs # TDVR05096 for the rear of your 2000 Dodge Caravan. They do not have a setup for your front suspension. view full answer...
I think the Ribbed Rubber Trailer Mat # 4872SM that you referenced would be the best option we have to turn the rear of your 2002 Dodge Caravan into a mini horse hauler. Since this was intended for horse trailers it would be ideal for the mini horses. You could trim this to fit your vehicle as well. It weighs 73 lb. view full answer...
For your 2005 Dodge Caravan without Stow and Go seats the Draw Tite hitch part # 36296 that you referenced is a fit and does not require any drilling to install. I attached an install video for this hitch for you to check out as well. view full answer...
We have two Kat's Heaters Custom Engine Block Heaters for your 2005 Dodge Caravan depending on the size of the engine.
If you have a 3.3L V6 Engine, then the correct part number for you is # KH11613.
If you have a 3.8L V6 Engine, then the correct part number for you is # KH11486.
We do not carry one for the 3.5L V6 Engine.
Both of the part numbers above will install in the same place. If you look at the diagram below, you will see the locations of your transverse engine. The proper... view full answer...
Derale Transmission Cooler # D13503 is an excellent choice for your 2007 Dodge Caravan. This cooler fits both 3.3L V6 and 2.4L I4 engines and provides high-efficiency cooling of your transmission fluid for towing applications or simply for taking some of the stress off the transmission during hot summer temps. Since you really cannot over-cool transmission fluid this is a great way to extend the life of your transmission.
You can refer to the two linked articles for lots more helpful information... view full answer...
We offer trailer hitches that would fit and work well on your 2002 Dodge Caravan, but since I do not know the part number of the hitch you are referring to or have access to the ad you mentioned I can't say for certain.
For your vehicle we offer the Curt # C13362. This hitch would fit and work well for towing a small trailer. I attached an install video for you to check out as well.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with... view full answer...
Yes, it is. Replacement Hardware Kits are listed on our site as # RHK.
This will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item Number. You would enter part # 36296.
Then select Draw-Tite from the Manufacturer drop down and the quantity of hardware kits you want. Add to the cart and check out. view full answer...
We offer a hitch adapter that will adapt a 1-1/4 receiver to a 2 inch, part # HTAD.
Keep in mind that using an adapter will lower the tongue weight capacity of your hitch by 50 percent. For instance, if your current hitch has a 350 lb tongue weight capacity, using an adapter will lower the capacity to 175 lbs. This will mean that the hitch accessory (bike rack or cargo carrier) plus what ever is carried on it can weigh no more than 175 lbs. This is caused by the additional leverage placed... view full answer...
You'll be looking at adding a trailer hitch receiver and what's called a "Platform Style Rack" to your vehicle.
If you don't already have a hitch, you'll want to install one to start. I recommend going with the Draw-Tite Class III Max-Frame Hitch, part # 75119. This is a no drill, no trim install that can be completed by local dealers or certified body shops, or done as a home installation. I've included a link to an installation on a 2007 Dodge Caravan which is built on the same frame... view full answer...
The Swagman bike racks like the Swagman XC 2-Bike Rack Platform Style Rack part # S64650 are made in Canada. They are still great quality and one of the most popular bike rack brands we carry.
I recommend to use the Saris Freedom 2 Bike Platform Rack part # SA4412B which is a 2-bike platform rack that fits both a 2" and 1-1/4" hitch that is made right here in the USA. It has a 60 lbs per bike capacity for heavier bikes. It also accommodates various size bikes because of the sliding wheel... view full answer...
The diameter of the crosstube on the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75119 which is a fit for a 2007 Dodge Caravan is about 2". view full answer...
Jayco offered the 1999 Eagle 10-UD Pop-Up camper trailer with and without brakes, so I presume you have the version without any brakes. Typically pop-up campers are equipped with electric drum brakes, rather than hydraulic disc brakes such as the Titan kit you reviewed, part # T4843300.
A first step is to review the attached article concerning adding electric drum brakes to a trailer. This covers all of the basics and required components.
It is necessary that your trailer axle has brake... view full answer...
Go To Results