Expert Answers about Toyota 4Runner

• Recommended Roof Rack for Thule Hullavator Pro on 2018 Toyota 4Runner
• The Yakima roof rack systems can be easier to determine fitment of the Thule Hullavator Pro # TH898 simply because you aren't restricted by length of crossbar since the T-Slot on the bottom of their bars goes all the way through. With that being said, I have confirmed with Thule that you will be able to use their WingBar Evo roof rack and use the Hullavator on your 2018 Toyota 4Runner. Since this is the case I recommend going with Thule because it gives you continuity between your accessories...
  view full answer...


• Recommended Brake Controller and 4-Way/7-Way Connector for 2018 Toyota 4Runner w/Tow Package
• The brake controller that I recommend for your 2018 Toyota 4Runner with the Tow Package is the Redarc Tow-Pro Elite # RED44FR because of how easy it is to use, the versatility in mounting locations, and the wide variety of towing applications it can accommodate. To connect this to your 4Runner you just need the adapters # 3040-P and # 331-TPH-017. The control box for the Tow-Pro Elite is able to sense the motion of the vehicle in any orientation and then the extra slack in the wiring harness...
  view full answer...


• Recommended Weight Distribution System for 3,500 Lb Trailer
• The Fastway e2 Weight Distribution System part # FA92-00-0600 is my recommendation for a 3,500 lb trailer. It has integrated sway control and it can be left hooked up while reversing but keep in mind you won't be able to back up at a sharp angle as this can cause damage to the head which will be the case for any system. They all allow for reverse but you can't back up at too sharp an angle. The only thing you'll need to complete the setup is a hitch ball, part # A-90 or part # 19286.
  view full answer...


• Why is there a Second Ground Wire in Brake Control Wiring Harness # 3041-P for 2017 Toyota 4Runner
• The grounds on many Toyota vehicles including your 2017 Toyota 4Runner has proven to be insufficient so an additional ground wire has been added to help. There is likely an existing ground location under the dash you can use or a bare metal surface that would be perfect for a ground. The firewall is one option. Just as long as it isn't a painted or coated surface and just bare metal it will work.
  view full answer...


• Hitch Fit for 1993 Chevy C1500
• A much better hitch fit for your 1993 Chevy C1500 would be one custom fit for your truck like the Curt # C13042 as the # C13900 is a multi fit hitch that wouldn't fit easily.
  view full answer...


• Can Echo Brake Controller C51180 Be Paired to A Different Phone
• Absolutely, you can re-pair the Curt Echo # C51180 to a different phone at any time, as long as the phone has an OS of Apple 8.0 or newer or an Android 4.4 or newer. You wouldn't want to try to use the Echo with 2 phones simultaneously, Such as two people trying to control the Echo at the same time with 2 different phones. I've linked to a product demonstration video for the Echo wireless brake controller that will walk you through how it works.
  view full answer...


• Which Drums and Brake Assemblies for Timbren ASR1THDS02 Axle-Less Suspension
• The Timbren # ASR1THDS02 Axle-Less suspension is compatible with hubs that use an L44649 outer and L68149 inner bearing like the # AKHD-655-35-EZ-K brake drums you mentioned. These drums have a 6 lug on 5-1/2 inch bolt pattern. If you needed a hub/drum with a 5 lug on 4-1/2 inch bolt pattern, you'd use # AKHD-545-35-EZ-K. Either 10 x 2-1/4 inch hub drum is compatible with the # AKEBRK-35-SA self-adjusting brake assemblies.
  view full answer...


• Will the Draw-Tite Front Hitch for a 2019 Toyota 4Runner TRD Work With KDSS
• Yes, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65074 is listed as a fit for a 2019 Toyota 4Runner TRD Off Road Premium and it should not interfere with the kinetic dynamic suspension system (KDSS). The Draw-Tite Front Mount Trailer Hitch Receiver is a bolt-on fit so there will be no cutting or drilling required. I have attached an install photo of what the hitch will look like while installed for you.
  view full answer...


• Weight Distribution Hitch Recommendation for Trailer with 300 lb Tongue Weight
• A weight distribution system with a tongue weight range of 800-1,200 lbs (I am assuming that's what you meant) is going to be very harsh on a trailer that only has 300 lbs of tongue weight. You will need a much lighter rated system. Ideally you get a system where your tongue weight falls right into the middle of the systems tongue weight range and you'll get the best overall towing experience. The Reese weight distribution system part # RP65509 would be a great option as it has a tongue...
  view full answer...


• Best Kayak Carrier For Ocean Malibu Two XL Kayak
• By far the best option for a rack to carry your Ocean Malibu Two XL kayak is the BigCatch from Yakima, which is the following part number: - Yakima BigCatch Kayak Carrier # Y04091 The BigCatch # Y04091 (which I verified with Yakima will fit your 4Runner) is the only carrier capable of handling both the 90 lb weight and 43 inch width of your kayak. It has four separate saddle-style cradles which you can put at the necessary width on your crossbars, and a 150 lb weight capacity. It even...
  view full answer...


• Locking Kayak Carrier and Paddle Board Carrier Recommendation
• Since we don't have a single rack that will be able to carry both your paddleboard and your kayak at the same time you'll want to go with a locking rack for each. The LockRacks like the part # LR54FR is lockable so this would be a great route to go with. This specific rack can carry a kayak or up to two paddleboards. You could use two of these assuming your board and kayak could fit on your crossbars next to each other. You might have to go with a J-style carrier for the kayak so that...
  view full answer...


• Compatibility of Lock N Roll Articulating Hitch With Weight Distribution Systems
• Unfortunately, there isn't a way to use the # 336VS501 Lock N Roll articulating hitch while using weight distribution. The good news is that we do offer a cushioned weight distribution shank, part # AMAC1. The shank has a 10K towing/2000 tongue weight capacity, and if used with a round bar system, it offers a 3-3/8 inch drop or 6-5/8 inch rise. When used with a trunnion bar system, it offers a 2-5/8 inch drop or a 7-3/8 inch rise. I've linked to a product demonstration video featuring...
  view full answer...


• Bar Length for Carrying two Yakima ShowDown Kayak Carriers
• Since the Yakima Showdown part # Y04081 hangs over the crossbars quite a bit when installed and they are 42 inches long the best bar length for two of them would be 60 inch like you mentioned. So for that you'd want the # Y00426 if you had the Jetstream bar setup or the # Y00422 for the CoreBar since these are the only two bar styles from Yakima that are available in 50 inch and 60 inch.
  view full answer...


• Westin Running Boards That Fit A 2022 Toyota 4Runner TRD Sport
• I have a solution, however the Westin Sure-Grip Running Boards w/ Custom Installation Kit # 27-6120-2165 you mentioned, will not fit your 2022 Toyota 4Runner TRD Sport. These running boards will fit the SR5 & TRD Off-Road or Pro models. Instead, you'll want to use the Westin Sure-Grip Running Boards w/ Custom Installation Kit # 27-6120-1945. These running boards will fit the TRD Sport and Limited models of the 2022 Toyota 4Runner.
  view full answer...


• Best Towing Mirrors for 2019 Toyota 4Runner
• The best towing mirrors for your 2019 Toyota 4Runner are the K-Source Universal Towing Mirrors # KS3891-2 because of their large mirror face and easy adjustability and installation. The K-Source Towing Mirrors # KS3891-2 have a mirror face which is 7-3/4" tall x 5-1/8" wide to give you an optimal rear view so you can see more of what is behind you to increase your safety. They are also very easy to install, using a ratcheting system and rubber straps that allow the mirrors to fit tightly...
  view full answer...


• Can You Add a Friction Sway Control Bar to a Trailer with Short Tongue
• If you're experiencing sway control issues, adding a friction sway control bar could be just what you need to get things under control. I recommend the Curt Friction Sway Control part # 17200. In order to install the Curt Friction Sway Control you'll need to make sure there is space on the trailer frame 24" back from the center of the coupler. If so then the only other thing you'll need is a sway control tab for the ball mount, the Reese Sway-Control Bracket part # RP26003 is a pretty cost...
  view full answer...


• Can Curt Cargo Bag for Roof Basket be Used on 2021 Toyota 4Runner Cargo Basket
• The Curt Cargo Bag for Roof Basket # C18221 is a universal item so as long as you have places to secure the tie-down straps and the 59" long x 34" wide x 18" tall dimensions works well for your application you can definitely use it for the cargo basket on your 2021 Toyota 4Runner! If your basket is slightly smaller or larger than these bag dimensions it will still work for you.
  view full answer...


• How Large Are The Chain Links In The Glacier Twist Link Snow Tire Chains
• The Glacier Twist Link Snow Tire Chains with Cam Tighteners - 1 Pair. part # PWH2228SC, per Glacier, has a link size of .23mm. They are rated for highway use and not off road use. The twist link pattern will give a slightly smoother ride than a square chain would. I have included a video review link and a diagram below.
  view full answer...


• Should Skid Plate Be Removed or Modified for Installing Curt Front Hitch on 2018 4Runner TRD
• Completely removing the skid plate on your 2018 Toyota 4Runner to make room for a front mount hitch like the Curt # C31076 that you referenced will be much simpler than just trying to trim the needed areas to allow fitment of the hitch's mounting brackets and crosstube. There aren't any specific instructions for this available so you would just need to cut the areas based on the hitch dimensions and how it lines up with the skid plate if you decide to do this. Since you would need still...
  view full answer...


• Do Aries AeroTread Running Boards Fit 2020 Toyota 4Runner TRD
• Good question so I reached out to Aries in regards to the fit of the AeroTread running boards on a 2020 Toyota 4Runner, and they said that the running boards do fit and will install, but they are currently waiting on confirmation of air bag compatibility, which is why they have - as of this writing - not put them as a fit. I have added a link to a video install and review of the running boards that fit your 2020 Toyota 4Runner TRD Off-Road - AeroTread Running Boards with Custom Installation...
  view full answer...