The clever folks at Swagman designed their Fork Down Roof Mounted Bike Carrier # S64710 with mounting hardware that can easily fit many different shapes and sizes of factory roof rack crossbars. This will fit your factory rack as long as the crossbars are not wider than 3-inches.
We do offer many roof-mount bike racks that will fit most factory bars, and the link provided for you will let you see them. You can use the filters on the page to narrow and sort the results based on your preferences... view full answer...
When measuring for the correct drop or rise in a ball mount, you will actually want to measure from the ground to the bottom of the trailer coupler. Most trailer couplers are only about 2 inches tall at the ball socket, so the measurement you have is likely around 17-3/4 inches.
For this, you will want a ball mount with a 2 inch drop like the Brophy Ball Mount, # BM20. I have attached a video review of a similar ball mount on a 2012 Toyota 4Runner and a help article that explains how... view full answer...
The K Source universal towing mirror, # KS3891, is designed to clip onto a factory mirror that has a gap or lip between the glass and the mirror housing itself. If the mirrors on your truck fit this description then there is a good chance it will fit. Since this is a universal fit item there are no specific vehicle fit lists for it. I have linked a video review of the mirror for you.
I looked up some pictures of the mirrors on your 2004 Toyota 4Runner and it would appear as if this mirror... view full answer...
The WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step for 2" Hitch part # WT81BS1XL should not interfere with the backup camera or reverse sensors on a vehicle. We aren't able to test this for every vehicle obviously but in most cases, it does not stick out far enough to affect either the backup camera or reverse sensors. If you need helping reaching items on the roof of the vehicle, this is the perfect step for you that will make this task much easier.
Please note, the step... view full answer...
No, the Aries RidgeStep Running Boards w/ Custom Installation Kit # AA86ZB are designed for Sprinter vans. I've posted a link below to all of the Aries branded running boards that will fit your 4Runner, model dependent, if you would like to look through some possible alternatives. view full answer...
Yes, I confirmed with Surco that the Clamp-On Adapter # SP1101 will fit your Surco Safari Rack 5.0 # S5072 on your factory rails on your 2013 Toyota 4Runner. view full answer...
You would need to find a way to keep the kayak level inside the vehicle, but I don't see any reason why you couldn't use the Rhino Rack T-Load Hitch Mounted Load Assist and Support Bar # RTL002 on your 2017 Toyota 4Runner in this manner. view full answer...
The Bulldog Winch Receiver Mount Kit # BDW20155 has the standard 10 x 4.5" mounting bolt pattern which will match up exactly with your Badland Apex 12000.
As for the wiring, you will need to route the wire from your 4Runner battery and mount the Anderson connector at the back of your truck and then strip the wiring on your winch to connect with the extra Anderson connector that comes in the Bulldog Winch Rear Wiring Kit # BDW20206.
I definitely understand where you're coming from about... view full answer...
Yes, the SportRack Semi-Custom Roof Rack, # SR1098, has been confirmed to fit your 2008 Toyota 4Runner Sport with factory roof rails.
I went to our warehouse to take a quick measurement and this roof rack will add approximately 2 inches to the current height of your 4Runner. view full answer...
The Yakima LoadWarrior, # Y07070, will work great on the factory crossbars on your 2005 Toyota 4Runner. You would also be able to use the LoadWarrior Extension, # Y07074, if you needed a larger basket. The extension adds 18 inches in the center of the basket.
The LoadWarrior will also work on Yakima Round Crossbars, like part # Y00408, and Thule SquareBars, like part # TH712400.
You will not need any additional items to mount the Yakima LoadWarrior Roof Rack Cargo Basket, but there are... view full answer...
Yes, for your 2016 Toyota 4Runner Trail with a sunroof the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System # JA9328 that you referenced is a confirmed fit and the correct size so it would work well for you. view full answer...
In order to use the Yakima LockNLoad Platform Roof Tray part # Y05045 which is the recommended size on a 2012 Toyota 4Runner you will need the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers part # Y05042-2 and the TimberLine Towers for Yakima Crossbars part # Y33TR. view full answer...
The Rhino-Rack MasterFit Rooftop Cargo Box part # RRRMFT440 fits any crossbars measuring up to 3-9/16" wide x 1-3/8" tall with a spread between 24-3/8" - 36-5/8" (center to center). In regards to roof clearance, I can't imagine this would be an issue with this box and if it was, you'd have issues with most accessories as this box doesn't sit below the bars much at all. I have attached a photo to show this but Rhino-Rack does not provide any measurement for this, it would also vary by crossbar... view full answer...
For your 2016 Toyota 4Runner that has factory raised side rails we have the Malone roof rack part number # MPG216 as a confirmed fit that I would recommend. This rack is very easy to install, is well made, and will cost considerably less than a Toyota rack.
This would also allow you to carry the Thule Ascent cargo box that you have. view full answer...
The correct wiring harness for your 2012 Toyota 4Runner and the Liberty brake controller is the universal splice-in option:
- Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR
- Redarc Tow-Pro Liberty Brake Controller # RED24FR
I verified this with the manufacturer, Redarc, for you. view full answer...
According to your owner's manual, the maximum side and cross chain diameter when using a set of snow tires on your 2013 Toyota 4Runner is 5mm. The Titan Chain Alloy Snow Tire Chains part # TC2524 has a link thickness of 5.5mm therefore, I cannot recommend you use them on the 255/70-R17 tires.
The extra .5mm could create clearance issues that would interfere with your vehicle's braking and suspension components. Instead, I recommend using the Titan Chain Alloy Snow Tire Chains part # TC2321... view full answer...
The Thule Hullavator 897 is not directly compatible with aero crossbars like the Thule WingBar Evo Crossbars and the adapter needed to use them are no longer available. Therefore, the only option would be to install square crossbars like the Thule SquareBar Evo Crossbars part # TH712400 or obtain the new Thule Hullavator Pro Kayak Carrier part # TH898. view full answer...
The reason a hub - as well as an axle - is sometimes rated lower than the GVWR of a trailer is because some of the trailer's loaded weight is going to be tongue weight, which is weight that is going to be applied to the tow vehicle as opposed to the trailer.
If your 2006 Trailmanor 2720SL has a hub that is part 8-247, the correct replacement hubs are going to depend on if you have a standard axle or E-Z Lube Axle:
- Standard Axle: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles... view full answer...
What you'll want to use is the Lock N Roll vehicle-side hitch that has a 2-1/2 inch drop. Being 1/2 inch off is perfectly acceptable for towing, and won't give you any issues in regards to being level, so what you want is the following:
- Lock N Roll Articulating Hitch for 2" Receivers - 2-1/2" Drop/Rise - Vehicle Side # 336VS511
Then to secure it to your vehicle you'll need either Hitch Pin and Clip # 37201074 or Hitch Lock # e98880. view full answer...
For your 4Runner the Malone AirFlow2 Roof Rack - 58" Long # MPG216 would be a great fit.
This roof rack attaches to the raised side rails on the cab of your truck and includes locks to help secure it and prevent theft. view full answer...