I am glad to hear that our website has been helpful for you. I have some good news, we do carry the Curt Class III Trailer Hitch, # C13094, and it is confirmed to fit your 1995 Toyota 4Runner as long as it has 31.5 inch or smaller tires.
The Curt hitch does not require any drilling like the Draw-Tite Class III Hitch, # 75145, because it does not mount to the underside of the frame. Curt has determined that the mounting holes on the side of the frame are sufficient to support this hitch... view full answer...
For your 2000 Toyota 4Runner, I recommend the Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional # 39510 with the Brake Control Plug-In Harness # 20127. This is the best controller under the price point you are seeking.
Then for your wiring, if you already have a 7-way connector you can use the kit # 5506. If you have a 4-way then you will use the # ETBC7 kit which comes with the 7-way adapter and wiring. If you don't have a 4-way, then you will need that first and... view full answer...
The foot plate of the Dutton-Lainson # DL22682 pipe mount swivel jack isn't removable, so a caster wheel wouldn't be easy to add. The Bulldog # BD1541150301 pipe mount jack is set up to accept a caster wheel like # JC-102. Keep in mind though, the # JC-102 wheel has a 1200 lb weight rating, which means that the jack's capacity would be limited to 1200 lbs when the caster is used. This is the only swivel pipe mount jack we offer in a 2000 lb capacity that could be used with a caster wheel. view full answer...
We do indeed have trunk-mount style 2-bike racks confirmed as a fit on your 2011 Toyota 4Runner and you can see all of them by clicking on the included link.
For a rack that will gently transport your bikes and also be easier to install and remove from the 4Runner I suggest the Thule OutWay 2-Bike Rack # TH45JV. This rack offers advanced design and excellent build quality. Among its included features are built-in locks for the rack itself and for your two loaded bikes, a superior 2-cable... view full answer...
We carry a large selection of lug nut that will meet your preferences that you listed. Depending on the lug stud size, we carry both chrome and stainless, like # AM90070 1/2in-20 stainless lug nuts or # AM90049 1/2in-20 chrome plated lugs nuts.
I have a attached a link to the product page for all the lug nuts we offer. Once you know your lug stud size, just click the link for stud size at the left of the page to go to the product page will all the lug nuts that will fit your application. view full answer...
I have heard back from my contacts at Roadmaster about the pin you were needing. Part # RM-910008-00 which is the 5/8 inch diameter Linchpin and Chain is the correct replacement for your Falcon Tow Bar. view full answer...
The Locking Knob with Bolt # SR0018 is the only locking knob that I can find that works with a 3/8" bolt. More specially it comes with a 3/8"-16 bolt that is 2-1/4" long. It will have the bolt fit on the knob as opposed to the Locking Knob # P1040 that threads onto the bolt.
The Locking Knob # P1040 will only fit a M10 x 1.50 bolt. view full answer...
Towing mirrors come in two types, custom-fit to the OEM style mirror assembly or a universal fit. For your 2004 Toyota 4Runner, there are no custom-fit towing mirrors available for this particular model vehicle.
We do carry some universal mirror that might fight, like # KS3891, but these mirrors have not been confirmed as an exact fit to your 4Runner's mirrors. You will need to measure your mirror to see if any of the universal applications will fit.
I have a link towards the bottom... view full answer...
Yes, you can use Locking Anti-Rattle, Threaded Hitch Pin # S64027 to lock your 17x50 Swagman Expanse Cargo Carrier # S68FR to a 2" trailer hitch receiver. I attached a helpful demonstration video for you. view full answer...
I do have a solution for you, but unfortunately we do not have any Multipurpose Ball Mounts like the Curt # D210 that feature a 4" drop.
Instead what you can use is a Gen-Y adjustable ball mount like part # 325-GH-523 which has a 5" drop /rise and a 16K weight rating. If you are within 1" of the rise/drop needed for your towing application then you can use the ball mount. This means that you can use the included ball mount in the lowest position thich frees up the top receiver opening... view full answer...
Surco rooftop baskets that mount to the factory siderails on your 2009 Toyota 4Runner are shown on the linked page. The largest of these is their 84 x 50-inch Safari # SPS5084-1101. This kit includes the required mounting adapters.
This basket weighs about 40-lbs so keep that in mind as you are planning your cargo load. The 4Runner's roof capacity must be enough for the weight of the basket itself plus what you load into it. So if your owner's manual says, just for example, that the roof... view full answer...
We have several options for trailer brakes that will fit a 10 inch wheel. For a 10 inch wheel you will need a 8-1/2 inch hub and drum assembly such as # T1544500042 which has a 5 on 4-1/2 bolt pattern. Then for hydraulic drum brakes we have just one option, # T4442000 for the right side and # T4442100 for the left side. These are designed for 3,000 pound axles.
For disc brakes we have the following options:
For 2,000 pound axles we have # K2HR2D.
For 3,500 pound axles we have # K2HR35D-8. view full answer...
Yes and yes! The Rhino-Rack Fishing Rod Carrier # RR576F needs cross bars to clamp onto. An interesting thing about this one is that it is also the Rhino-Rack Ski and Snowboard Carrier # RR576. We have people that use this for both purposes for different seasons.
As for crossbars, the Curt Roof Rack for Raised Rails # C18118 is a great option. The best thing about these rails are that the cross bars are 2-1/8" wide x 7/8" tall. The Rhino-Rack Carrier # RR576F clamps around crossbars that... view full answer...
We do have the Redarc Tow-Pro Electric Brake Controller Mounting Kit EBMK-001 that you are looking for. Our part number for this kit is # RE67FR. view full answer...
The TowReady T-One Vehicle Wiring Harness for the Toyota Highlander, part # 118413, is a vehicle-specific plug-and-play trailer wiring harness. Because it is made specifically for the Highlander, it offers the convenience of very simple plug-in installation without the need to cut and splice wires. However, it would be impractical to try to modify this Highlander harness for use in your 4Runner.
Although we do not offer a comparable plug-and-play trailer harness for your 4Runner there... view full answer...
It sounds like what you are looking for is the MB Sturgis Quick Disconnect Propane Hose for Small Appliance, # 100476-72-MBS. This is a 6' hose that has a 1/4" Male QD on one end with a 1by 20 on the other that connects to the Buddy Heater in place of the disposable/1 lb. bottles. view full answer...
Yes, there is an adapter for you. The Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers # RED49FR is what you are looking for. Plug one end of the adapter into your Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR and plug the other end in beneath your Toyota 4Runner's dash. view full answer...
We have many different floor mats that would be compatible with your 2013 Toyota 4Runner, click the provided link to see our selection. To narrow your choices down, be sure to click the drop-down menu and choose the seating layout of your 4Runner. The choices include:
2 Rows of Seats, with Double Decker Cargo System
2 Rows of Seats, without Double Decker Cargo System
3 Rows of Seats
You can then use the filters on the left hand side of the page to further narrow down your choices according... view full answer...
We have several straight bolt or clamp-on exhaust tips which you can see by clicking the provided link, but none of the options offer a turn down or out. However, we do offer a weld-on option for a 2-3/4 inch tailpipe that has a turn down or out, part # MF35179.
If you don't weld, a local muffler shop should be able to install that for you quickly and easily. view full answer...
I have a couple solutions that may work for you, since, like you pointed out, there are no custom fit front mount hitches, winch mounts or bumpers for your 2004 Toyota 4Runner.
One option is to use the Bulldog Winch Universal Winch Mounting Plate, # BDW20008. You will need to find a sturdy location on your 4Runner and drill mounting holes to bolt the plate. You also have the option to weld it in place for a permanent installation. The # BDW20008 is designed to fit the a 10 x 4-1/2 mounting... view full answer...
Go To Results