Does the RV Rider # HLY64FR Come with 2 Small Wheel Hoop Adapters # HLY24FR?

Question

Question:

Hi Guys, The Hollywood site says this model Now includes two Small Wheel Adapter SW-ADP-U. Just wanting to confirm that your stock has these small wheel adapters included? Thanks!

asked by: Willilam M

0

Expert Reply:

Yes! I went ahead and called my tech at Hollywood Racks, and he confirmed that the RV Rider # HLY64FR comes with 2 of the Small Wheel Hoop Adapters # HLY24FR (SW-ADP-U).

expert reply by: Bob C

0

Answer 1

There is an adapter that accommodates 20" wheels for the Hollywood Racks Sport Rider SE2 Bike Rack #HR1450Z, and that would be part number #HLY24FR.

view full answer...

Answer 2

Absolutely! For the best option, I recommend the Hollywood Racks RV Rider - 2" Hitches #HLY64FR. The RV Rider comes with a massive 80-pound per bike weight capacity. Also, one of the huge benefits is that the rack attaches to the frame…

view full answer...

Answer 3

The Hollywood Racks RV Rider 2 Electric Bike Platform Rack - 2" Hitches - Frame Mount #HLY64FR is compatible with a 20 Inch fat tire electric bike. It will not require any wheel adapter and is already compatible with tires up to 5 inches wide.

view full answer...

Answer 4

Yes! Our part number #HLY64FR is the same as the Hollywood Racks part number HR1700. These both correspond to the Hollywood Racks RV Rider. As far as clearing your spare tire on your Jeep Wrangler, there is a definite way to tell if you have enough…

view full answer...

Answer 5

The Hollywood Racks RV Rider part #HLY64FR that you referenced does not require any type of adapter to be used with a 20 inch wheel and would work great with your Rad mini step thru e-bike. You can use the clamp on the seat post as well like you…

view full answer...

Answer 6

The Hollywood Racks RV Rider part #HLY64FR is an E-bike rack that is approved for use at the rear of a fifth wheel like you mentioned and has an 80 lb per bike capacity as well. For more info on this rack check out the review video link I attached as…

view full answer...

Answer 7

For an RV approved e-bike rack the Hollywood Racks RV Rider part #HLY64FR would be what you'd need. Since you have the smaller diameter wheels you'd also need the small wheel hoop adapter part #HLY24FR and you'd be set. This setup would…

view full answer...

Answer 8

The Yakima HoldUp 4 Bike Platform Rack part #Y02443-2 will accommodate kid's bikes with wheels as small as 20 inches. According to Yakima, they do not recommend using the Yakima HoldUp with kid's bikes that have smaller than 20" wheels.…

view full answer...

Answer 9

The Small Wheel Hoop Adapter for Hollywood Racks Universal Wheel Holders - Qty 1, part #HLY24FR, is the same part as the SW-ADP-U. We just have our own part number for that product, but if you look in the product description under features you will…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Does the RV Rider # HLY64FR Come with 2 Small Wheel Hoop Adapters # HLY24FR?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching