For screws to attach the part # HTP24BK to your horse trailer we recommend the part # PS-8. These screws are 3/4 of an inch long so I would go with a plywood thickness of at least 1/2 of an inch. view full answer...
The CIPA Deluxe Door Mount Mirror (Qty. 1), # 11650 installs easily and fits most vehicles, and should be a good fit for your 2008 Toyota FJ Cruiser. I have included a link to a video review featuring this mirror below.
I have tested this mirror along with several of the other universal towing mirrors that we carry and have found that the door mount mirrors offer the best, most stable, view when driving at highway speeds. Since there are no custom fit towing mirrors available for your... view full answer...
The Yakima SpareRide, part # Y02599 will have its hanging rack sitting above or in line with the spare tire's top. On the 2007 Toyota FJ Cruiser, this is pretty high off the ground.
Instead, I'd recommend a platform style rack like the Saris Freedom, part # SA4412B. This will sit significantly lower on the vehicle, allowing for an easier load onto the bike rack. It also includes integrated rack and bike locks for added security. I've included a video of the trailer hitch version of the... view full answer...
I would recommend you go with the brake controller, especially since you plan on traveling in the mountains. Having operable brakes on your trailer will save wear on the vehicle by providing some of the braking force. I would recommend the Tekonsha Prodigy P2, part # 90885. Its ease of set-up and use help make it our most popular brake controller.
If you are fairly handy and have a passing familiarity with basic wiring, you should be able to accomplish the installation yourself. We have... view full answer...
The Tekonsha Prodigy P3 Brake Controller, part # 90195 will work well with your 2007 Toyota FJ Cruiser.
Since there is no plug-in for the brake controller under the dash on your vehicle you will need to hardwire the brake controller. I have attached an installation video that shows how the wiring is done you can take a look at.
You will need a 7-way connector at the back. for this I recommend part # ETBC7. The 4 pole connector on this kit will connect to the 4 pole on your FJ cruiser,... view full answer...
The 265/70R17 spare tire on your 2007 Toyota FJ Cruiser has an overall diameter of exactly 31.6", so for a cover that will work great I highly recommend the Classic Accessories # 052963753875. This is designed specifically for 30" to 33" spare tires and the elasticized back hem with quick connect clips allow for a quick and adjustable (snug) fit. The durable vinyl fabric will work really well to protect the tire through those Canadian winters.
I have attached a short video review on the... view full answer...
For your 2010 Toyota FJ Cruiser the correct Westin hardware kit would be the part # 32-221PK since the correct fitting Westin skid plate and bull bar is the part # 32-2210. view full answer...
SUPs are usually pretty long. The Carpod part # M2205-2201 isn't going to be long enough to fit the length of a SUP like what you have.
You are going to have to look into a roof rack mounted SUP carrier like the SUP Taxi part # TH810001 which is a fit for the factory crossbars of your 2014 Toyota FJ Cruiser. view full answer...
Yes we have just the bike rack for you. I highly recommend the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount Part # HLY84FR. This bike rack can accommodate up to 5" tire widths, as well as up to 80 lbs. per bike. You will want to mount each ebike with the battery removed, while you have these loaded on the rack on the back of your vehicle. view full answer...
Yes, the Adapter 4 Pole to 7 Pole # 30717 that you referenced will do exactly what you want and will allow your FJ Cruiser to connect to your trailer that has a 7-way.
A better choice might be the # 37185. This comes with a mounting bracket and a 4-way on the side of the 7-way as well. Either adapter will allow to tow your trailer and all of the taillight functions will work properly. view full answer...
The Yakima SpareRide bike rack part # Y02599 that you referenced has been confirmed as a fit for your 2014 Toyota FJ Cruiser so it would fit. This is an excellent spare tire mounted bike rack so I would recommend it for you.
I attached a review video that shows how it installs and it's features for you to check out as well.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and... view full answer...
Adding suspension enhancement like Timbrens will help with sag and increase stability and ride quality. If your 2011 Toyota FJ Cruiser is a 4-wheel drive model, for the front you can use # TTOFTAC4A that you have referenced. There is no option for the front if it is a 2-wheel drive model.
For the rear if it is 2- or 4-wheel drive use # TTORSEQ. I have included links to the instructions for both sets for you to view. I have also included a link to our FAQ article on Timbren suspension enhancemen... view full answer...
You should be good with the setup you mentioned. The Curt hitch part # 13367 that you referenced will have a distance of 6 inches from the center of the pin hole to the furthest point out on the spare tire cover, whereas the Thule T2 Pro XTR Bike rack part # TH69TX has a distance of 7 inches from the pin hole to the nearest portion of the rack.
I attached a review video for the bike rack and an install video for the hitch for you to check out. view full answer...
The brake controller I recommend for your 2007 Toyota FJ Cruiser, is the Tekonsha Prodigy P2, part # 90885. This is one of our most popular brake controllers because it is easy to install and use.
You said your Cruiser was equipped with a factory tow package. This can have several different meanings, depending on the vehicle manufacturer. Some vehicles come with the 7-way harness, some have a 4-way harness, and some vehicles with the tow package have the drive train or transmission upgraded... view full answer...
Derale remote transmission/engine oil cooler # D15220 is a great choice for your 2007 Toyota FJ Cruiser. No adapters are needed for the transmission cooling part except for # D13004. For the oil cooler part you will need installation kit # D15751.
You may need to use a shorter oil filter which in this case Wix filter 51381 is the shortest one that is compatible (3.14 inches tall). view full answer...
Your 2007 Toyota FJ Cruiser has a towing capacity of 5,000 pounds and the 2016 Micro Minnie 2106FBS can weigh as much as 7,000 pounds when fully loaded so I can't recommend towing this with your vehicle. You will want to look for a camper that's a bit lighter and within the FJ Cruiser's limits.
When you do choose an appropriate trailer you will need to add a trailer hitch, wiring harness, and ball mount/hitch ball combo to the vehicle in order to tow it.
Starting with the hitch I recommend... view full answer...
For trailer wiring to go along with the Curt Hitch part # 13367 that you installed on your 2014 Toyota FJ Cruiser I would recommend the Curt Wiring harness part C55567. I attached installation instructions for this harness for you to check out as well.
For how to pick out the correct ball mount check out the FAQ article I attached to right. view full answer...
Weight Distribution is a good idea if you are pulling at least 50 percent of your vehicles weight. Many good WD systems come with sway control, too, so we will look at those. First, you will need a hitch.
I recommend the Curt Trailer Hitch, # 13367, which is a custom fit item for your 2007 Toyota FJ Cruiser, unless your FJ is equipped with the auxiliary fuel tank. The hitch will bolt to the frame and this one will install in about 30 minutes. I have included a link to the instructions... view full answer...
If you are not a fan of the tube-fin design then I would go with separate coolers using a plate-fin design. For a transmission cooler, the most popular one for a 2009 Toyota FJ Cruiser is Derale cooler # D13503. I have included a link to all of the recommended plate-fin coolers for your vehicle.
For an engine oil cooler, a stacked plate design, like # D15651, will take up the least space. This cooler has 3/4-16 filter threads and 2-3/4 inch o-ring which is what should be on your FJ.
I... view full answer...
The absolute best option to mount a Thule Hullavator # TH898 onto your 2010 Toyota FJ Cruiser is by using Inno Square Crossbars.
The length of the Inno Square crossbars you need depends on the measurement between the top of your driver's-side door surface to the top of your passenger's-side door surface. This is where the Inno Feet # INSUT mount onto your roof to hold up the crossbars. For example, for the Inno Square 50" Crossbars # INB127 to be the correct size for the Hullavator to... view full answer...
Go To Results