If you already have the 4-pole wiring harness installed on your 2008 Toyota FJ, then all you will need is the 7-way install kit # ETBC7.
This kit will include the 7-way connecter, all the wiring, and hardware needed to install a brake controller to your vehicle.
If you do not have a brake controller yet, I recommend the Tekonsha Prodigy P2, # 90885. The P2 has 3 boost levels and will continuous do diagnostic check on you system to warn you of any issues the might occur when towing.
I... view full answer...
I am not aware of a conversion kit that would be necessary for your FJ Cruiser. All you should need is the appropriate brake controller, I recommend the Tekonsha Prodigy P2 part # 90885, and the install kit, part # ETBC7.
If your vehicle does not already have a 4 way trailer connector, you will need a T-1 Harness, part # 118405, the one you were looking at. The T-1 connector would tap into your lighting circuits to provide lighting for your trailer.
We also have a very good two part... view full answer...
Though there is not a kit with everything but the Hopkins # 37185, we can get you everything you need from the # ETBC7 so you won't have to spend money on a part you don't need.
Start with Wiring Kit # 5506, which has 25' of wire, 20-, 30- and 40-amp circuit breakers, butt connectors and ring terminals. You'll also want a pair of Quick Splice Wire Connectors # SWC501746-1, four self-tapping screws # 101131802 and one larger self-tapping screw # FA1131822. Next, you'll need a circuit tester,... view full answer...
To purchase wiper blades for your 2014 Toyota FJ Cruiser you will need to order an additional blade of the shorter size. For instance if you choose the Michelin RainForce set you will order:
16 inch blade # MCH3716 - Quantity 1
14 inch blade # MCH3714 - Quantity 2
The shorter blade can be either a 13 inch or 14 inch depending on the manufacturer of the wiper blade.
I've linked a video that shows how the Michelin RainForce blades install. view full answer...
From what I see, there is no plug in wiring harness for a brake controller available for a 2011 Toyota FJ Cruiser. That does not necessarily mean that there is not factory connector available and a local dealer will be able to tell you more.
From what we have seen, you will need to hardwire in a brake controller. You will first need to install a 4-Way trailer wiring harness, # 118405. Then, you will need to install a 4 and 7-Way installation kit, # ETBC7. I have included links to the installation... view full answer...
Since your hubs are for 5200-lb axles and you've confirmed that you do have a 3" diameter axle, you'll need the Redline 5 Bolt Flange # 4-44-1 . You should know, if you don't already, that brake flanges need to be welded perfectly concentric. For that reason we generally recommend that the work be done by an experienced trailer shop that has the required jig.
To add brakes to your axles you'll need a couple additional parts- brakes and a hub and drum assembly. For brakes I recommend the... view full answer...
The Thule Stay-Put cradle, # 853-7887, can be fitted with an anti-sway cage using # 853-7758. For the cradle and for the cage you would use strap # 852-3006-001. view full answer...
For your 2017 Toyota Prius, I recommend the Konig Self-Tensioning, Low-Profile Snow Tire Chains # TH00023060. These chains are confirmed to fit your 175/65R15 tires, and will work great in snow. These chains also feature an easy to use design, simply drape over your tires, make your connections, and you're ready to go. These chains will self tension as you drive, ensuring a perfect fit.
For your 2010 FJ Cruiser, I recommend the Titan Chain Alloy Snow Tire Chains # TC2326. These will also... view full answer...
Yes, you can purchase the mounting brackets so you can mount on another truck. It's # BX400. These are sold as a pair.
This bed extender # BX4004-01 is designed to fit tailgates between 48-64 inches wide view full answer...
The Titan Flexible Brake Line Tubing Clip # T0776400 installs to your trailer's frame along with a mating bracket, part # T0776300.
Bracket part # T0776300 bolts on to your trailer frame (hardware not supplied) and the clip portion then attaches to the bracket and holds the end of the brake line fitting. view full answer...
Trailer brake controllers such as the Prodigy P2 # 90885 and P3 # 90195 are not vehicle-specific so you can install any controller you like in your 2008 Toyota FJ Cruiser. The P2 and the P3 are very similar in actual technology and operation but the P3 adds some nice features that make it easier to use, such as storable trailer braking power settings and a larger display.
Any controller you choose will install in your FJ using our installation kit # ETBC7. This includes all of the parts... view full answer...
Since you will be using the 4- and 7-Way installation kit # ETBC7 to add a 7-Way to your 2012 Toyota FJ Cruiser you will not need to get circuit breaker kit # 331-CBK30-EB. The ETBC7 kit comes with a 30 amp circuit breaker, wiring, and other accessories.
Since your FJ already has a 4-Way flat connector you will just need # ETBC7 and the brake controller # RED44FR. I have included some links that show and explain the ETBC7 installation for you. view full answer...
You will need our Universal Installation Kit # ETBC7 to connect to the 4-way Connector # 118405 on your 2014 Toyota FJ Cruiser. This includes the wiring for running both a charge line and Brake Controller # RED52VR on your FJ. The end connector will have both a 7-way connector and 4-way flat connector so you will not need to have an adapter for smaller trailers. view full answer...
You can try using the etrailer 2-in-1 Exterior Windshield and Wiper Blade Cover # e98899 while flat towing your 2007 Toyota FJ Cruiser but it's designed for a vehicle that is sitting still so we can't really speak to how it will hold up to highway winds.
We actually have protectors that not only help protect the windshield but also the front of the vehicle in general, like the Roadmaster Tow Defender Protective Screening # RM-4700. If you let me know what tow bar and base plate kit you... view full answer...
I would recommend purchasing the brake controller installation kit # ETBC7, as it includes the 4 to 7-Way adapter and items needed to complete the brake controller installation on your 2007 Toyota FJ Cruiser. You will need to connect the brake controller wiring as follows.
White: Ground, attached to the vehicle negative battery terminal.
Black: 12v lead, attached to the vehicle positive battery terminal with a 20amp or 30amp circuit breaker, included in the # ETBC7 kit.
Blue: Electric... view full answer...
Thanks for all of the info on the parts you're looking for. From those specs I recommend the following for you:
Wheel and Tire combo # AM34834
Buyer's Products Square Jack # 3370091415H
Curt Lunette Ring # C48560
Electric Drum Brakes for 7,000 pound Axles # AKEBRK-7-SA view full answer...
Though we have options for a back up camera for your 2007 Toyota FJ Cruiser we will not have a third light camera for your Cruiser. So the Rear View Safety Third Brake Light with Camera # RVS-1016 will not work. One of the most popular options for a backup camera would be the Hopkins Smart Hitch # HM50002 which will use a license-plate mount camera and includes a separate display which does not require you to remove the Fj's stock mirror. A cool feature of this back up camera is that the... view full answer...
The # 30717 is exactly what you're looking for as long as you don't need the 7-way to supply anything other than lights on the trailer. You just plug the 4-ways together, connect the white ground wire to the vehicle's frame using the included screw, and cap off the other wires.
If you need the other functions of the 7-way, such as if the trailer has electric brakes or needs a constant 12-volts for power, the instead your best option is our # ETBC7 kit. This kit includes the adapter similar... view full answer...
The RockyMounts BackStage 2 Bike Platform Rack # RKY10002 fits the exact description of what you are looking for in a bike rack to carry 2 bikes on your 2001 Toyota FJ Cruiser. It has the ability to tilt, swing-away, can fold up, and comes with hitch and bike locks to deter theft of your equipment.
Since trailer hitch receiver locations and spare tire width can vary you will want to measure from the center of your hitch pin hole to the outermost edge of your spare tire. If that measurement... view full answer...
To use a brake controller on your 2014 Toyota FJ Cruiser you need to start off with a 4-Way connector like part # 118405. Once that is installed you need the Universal Installation Kit # ETBC7 which comes with everything needed for a fully functional 7-Way and a 4-Way connector.
For a brake controller I highly recommend the Tekonsha Prodigy P3 # 90195. This is a proportional brake controller that will apply the brakes on your trailer at the same time and with the same intensity as the... view full answer...