For your 2020 Thor Windsport Motorhome, you can use the:
-Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes # RM82RR.
This steering stabilizer works with Class A motorhomes with a GVWR up to 26,000-lbs, which yours is under, and also includes the custom mounting brackets as well as the installation hardware. view full answer...
The correct Roadmaster steering stabilizer for your 2021 Thor ACE 32.3 on the Ford F-53 chassis is the following:
- Roadmaster Exact Center Steering Stabilizer # RM63RR
I verified this fit directly with Roadmaster for you. view full answer...
If your RV currently has incandescent lights and you're going to be adding the Triple LED # CE44VR to the mix then you will most likely need to add resistors like the Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2 # DI34ZR to the turn signal circuits. This will keep your blinker from hyper-flashing and allow them to function normally. view full answer...
I may have a solution for you, but there is not a product that we carry that is going to meet all of the specifications that you're seeking and the biggest issue will be the power cord, which you can work around with an extension cord. The other option would be wiring the light directly to a dimmer switch that can be installed right inside your RV door and routed to a 12v power source to allow you the best solution for this. I'll provide you with the parts for both options.
If you want... view full answer...
We're familiar with this issue which happens when the incorrect switch is used. Kwikee Steps use two different magnetic switches. One is a normally open circuit and the other is normally closed circuit. The switch must match the controller. Otherwise, the steps will work in reverse, as you described.
The original switch kit included with the newer Kwikee 32 Series Electric RV Steps # LC372261 is an open circuit. The two magnetic sensor tabs mount in the doorframe and on the door. When... view full answer...
The best way to improve steering and ride stabilization on your 2017 Thor Windsport 31S is to add an anti-sway bar and some suspension enhancement.
For the Ford F-53 chassis that your Windsport has we have the Roadmaster Rear Anti-Sway Bar # RM-1139-146 which has a bar with a diameter of 1-1/2". Since this is typically larger than OEM anti-sway bars you will definitely be able to tell a difference. This is designed for coaches between 16,000 lb and 18,000 lb GVWR.
To add suspension enhancement... view full answer...
Thanks for the picture!
I took a look at what we got for your 2018 Thor Palazzo Motorhome, and it appears you need the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System # LC324269.
This replacement will replace the foot pad for your Lippert hydraulic ground control leveling system, and includes O-rings, the washer, and bolt for installation. view full answer...
You are definitely on the right track for helping to make your ride more comfortable when traveling in your 2018 Thor Windsport 29M.
The first things we recommend to upgrade are the steering stabilizer, which you've already done with part # RM-RBK22-RSSA, and the anti-sway bars. For the front we have the Bushing Kit # RM-4139-127 which is designed to upgrade an OEM 1-5/8" bar if it exists, and for the back you can use the Roadmaster Rear Anti-Sway Bar # RM-1139-146.
If you happen to not... view full answer...
I have an answer for you. Unfortunately, I cannot confirm what new shocks you need for your 2004 Thor Wanderer unless I have the length of your shocks totally expanded or totally compressed. I went ahead and attached a picture of how you take the measurement of your shocks.
With your 3500 pound axles, I recommend the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281255. These shocks have an extended length of 13-1/2" and a compressed length of 8-5/8". In order to know if these... view full answer...
There is indeed a storage cover that fits the pair of generators included with the Champion 9,000-Watt Inverter Generators w/ Parallel Kit.
What you need are two (one for each generator) of the Storage Cover for Champion 2,800 to 5,500-Watt Inverter Generator # CH57FR. view full answer...
The Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke part # BV0554-03 is designed to fit the very common Ventadomes and post-1995 Elixir trailer roof vent. If you have one of these models this will be your replacement.
If you have another brand roof vent please let me know and I will give you the correct replacement. The manufacturer's name and model number should be on the vent.
The variance in price comes down to a great deal of factors through an algorithm... view full answer...
When it comes to a 1-7/8 inch ball or a 2 inch ball with a 3 inch shaft we do not have any stainless steel options. We do have the Chrome in a 2 inch # C40020 and in 1-7/8 inch # C40017. We also have the 2 inch Zinc coated # CB84Z. We do have The 2 inch Hitch Ball - 1-1/4 inch Diameter x 2-5/8 inch Long Shank - Stainless Steel - 10K # C69FR that may also work for you.
I attached a review video link below. view full answer...
In order to determine the correct replacement anode rod I am going to need a bit more information from you. The most important piece is going to be your water heater's model or manufacturer part number.
For example, if you had the Suburban SW6DEL water heater, then the correct anode rod is the Camco RV Water Heater Anode Rod # CAM11563 which is aluminum, is 3/4" in diameter and measures 9-1/2" long.
If you are sure you have the right part, then there is a chance the threads are shot on... view full answer...
I have a great setup for your 2020 Thor Quantum Motorhome that will address the sway feeling you are experiencing. We have front and rear sway bar kits that are designed to minimize the side-to-side movement of your RV and will improve the overall stability of your vehicle. For the front end I recommend the Roadmaster Front Anti-Sway Bar item # RM-1139-176. This sway bar has a 1 3/8" bar that is made out of 4140 chromoly steel for superior strength. For the rear of your RV I recommend the... view full answer...
Thank you for all of the info!
According to Roadmaster you need the Front Anti-Sway Bar # RM-1139-176 and the Rear Anti-Sway Bar # RM-1139-147.
Then for suspension enhancement I recommend the SumoSprings # SSR-106-54-1 for the rear and # SSF-106-47 for the front. The SumoSprings provide more support as more weight is added and the best part about them is that once you install them there is no maintenance. We have had a lot of customers install these on motorhomes and they love them because... view full answer...
Since the Champion 5,000-Watt Inverter Generators w/ Parallel Kit # CH39FR runs exclusively off of gasoline, so there is no need for a propane tank!
These generators actually just require a minimum of 87 octane regular gasoline with a maximum of 10% of ethanol to run.
If you're wanting to use a generator that is compatible with both propane and gasoline, then the:
- Champion 9,000-Watt Dual Fuel Inverter Generators w/ Parallel Kit # CH49FR sounds like what you're looking for.
These... view full answer...
According to the information I got from Bigfoot you will need the SnapPad BF 7 Jack Pads for Quadra Bigfoot Leveling Systems # SN38FR. These are the pads they recommend for your 2016 Thor Citation Sprinter 24SL with the Sprinter chassis and their leveling system AC-MB2007. view full answer...
The Replacement Touch Pad Control Panel for Lippert Power Gear Hydraulic RV Leveling System # LC58CJ is the correct replacement for the Lippert Power Gear hydraulic RV leveling system (500105E) and will not work for your Thor Delano.
The 175225 part number you mention actually corresponds with the Replacement Lippert Control Panel with Amp Connector for 4-Point Leveling System # LC175225. view full answer...
The Timbren suspension enhancements you need for your 2023 Thor Outlaw motorhome include the Front Kit # TFFF53B and the Rear Kit # TFRF53A. These are a great way to replace/upgrade the OEM bumps stops as the OEM bump stops tend to be lacking in performance, although it sounds like they are just simply lacking to be in place for your application.
Attached are some review videos for you to check out. view full answer...
Since it sounds like you already have a factory 4-way on your 2011 Damon Daybreak, you would need the Universal Installation Kit for Trailer Brake Controller # ETBC7 to adapt that 4-way into a 4-way and 7-way. Given the length of your vehicle you will also likely need additional wire length. The # ETBC7 comes with 25'. If you are installing a brake controller you can use the Deka Jacketed 2 Wire # 10-2-1, if you are just wiring it for the 7-way with no brake controller you can use the 10... view full answer...
Go To Results