With the Curt trailer hitch part # C11020 installed on your 2014 Smart fortwo the correct ball mount is the part # C45014. Then for a hitch ball you'd want the part # A-82 for a 2 inch ball or part # A-80 for a 1-7/8 inch ball. view full answer...
The more secure coupler locks we offer are designed for be used when the trailer isn't hitched to the vehicle. They're designed to prevent the coupler from being hitched to a trailer ball, like # FA86-0015-305.
With the trailer attached to the ball, you'd want to use something that would prevent the latch mechanism of the coupler from being opened, as well as securing the ball mount into the hitch receiver using something like the # BD580402 hitch lock you'd looked at.
The latch locks... view full answer...
You can leave the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B installed even when not in use. However, we recommend taking it off the roof whenever you can because it will increase the longevity of the vacuum cups if it avoids the elements or dust/debris. view full answer...
The # 52285-1 base plate kit is compatible with all Roadmaster tow bars. I'd recommend the Roadmaster Falcon 2, part # RM-520. The Falcon 2 features a self-aligning design that would make hooking up your ForTwo easy without the need to have the car perfectly lined up behind the motorhome. The Falcon 2 actually includes the crossbar and quick disconnects that comprise part # 910021-00, so you wouldn't need to purchase those separately.
If you'd care to see an install video for the base... view full answer...
The Roadmaster Tow Dolly part # RM-2050-1 does not come assembled. You will need to put several components together to install the dolly. If you check out the install instructions you can see the entire process. view full answer...
What you need is the tow bar base assembly # 910021-00. It has the QD base that is used by your Falcon 5250 tow bar. The QD base parts are welded to the bar, pins are included, as well as some hardware to attach to the vehicle side base plates. I have linked a video review of this part for you. view full answer...
I spoke with Roadmaster and confirmed the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700 is not a fit for a Smart fortwo due to limited mounting locations. Instead, I recommend the Demco SBS Stay-IN-Play DUO Supplemental Braking System part # SM99251 for hydraulic brakes or the Demco Air Force One Supplemental Braking System part # SM99243 for air brakes. They will also require the Brake Pedal Adapter part # SM99602. The main unit for either of these systems mounts in... view full answer...
The Roadmaster base plate kit part # RM-52300-5 that you referenced weighs a total of 48 lbs. A typical tow bar like the Falcon 2 part # RM-520 weighs 61 lbs. view full answer...
Curt trailer hitch # C11020 does not fit the Brabus models of the 2009 Smart fortwo. There are no other hitches but if you need to carry cargo or bikes there is a roof rack option.
The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B is the correct fit for your car. It utilizes vacuum cups that are rated for 210 lbs pull strength each to secure the rack and your cargo to your roof. I've attached some videos to show how easy it is to install and how sturdy it... view full answer...
Assuming that you have a Roadmaster Tow Bar, you'll want to use # 910021-00, which includes both the crossbar and the quick disconnects, as well as the 3/4 inch diameter linch pin.
If you have a different brand tow bar, you'll also need an adapter, as outlined in the chart I've linked.
I've linked you to some product description videos for the crossbar/quick disconnect assembly. view full answer...
If you are looking for a creative solution that will allow you to attach a single bike rack to your 2016 Smart fortwo, I recommend the SeaSucker Talon Roof Bike Rack - Fork Mount - Vacuum Cup Mounted # 298-BT1004. The Talon comes with a weight capacity of 45 pounds and includes a HUSKE universal fork mount, a 9-mm thru-axle adapter, and a quick-release skewer to secure your bike. Also, the vacuum mounts on the Talon involve the easiest installation/removal process of any system we carry.... view full answer...
The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200 is not a fit for your 2013 Smart fortwo. There is not a harness that plugs into the factory wiring of your vehicle, but there are some great options that are confirmed fits but require splicing. I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 which will give you a clean connection on the front of your Smart and will allow you to splice into your factory wiring while protecting your... view full answer...
In order to obtain replacement arms for a Roadmaster Base Plate Kit you'll need to order the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS. Once purchased, you'll be asked to fill out a form which is attached below that has all the details needed to ensure you get the correct set of arms. view full answer...
For your 2013 Smart fortwo, I will walk though the parts listed to confirm fits and compatibility to assist. The Blue Ox base plates # BX1987 is a confirmed fit and will work well with the Blue Ox Alpha Tow Bar - Motorhome Mount - 6,500 lbs # BX7380 you referenced which comes with the safety cables.
For your tow bar wiring, the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 is an excellent choice to give you the clean connection and utilize your factory wiring while... view full answer...
The Kuat Transfer 1 Bike Platform Rack # KU64FR will allow you to carry a bike with fenders if they are mounted in a way that will allow the clamping force needed to secure the bike without damage to the fender. With plastic fenders I don't recommend using that bike rack as it could deform your fender.
For your RadCity Commuter bike, you could look at how the RockyMounts HighNoon FC Solo Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount # RKY87RR mounts. It has extra features... view full answer...
I see that Jeff L told you a few years back that the Invisi-Brake part # RM-8700 would not fit your vehicle due to it's braking style. Since then the fit info has changed for this braking system and it is listed as a fit for your 2008 Smart fortwo.
That being said, for the permanent install style of supplemental braking I would recommend the SMI DUO part # SM99251 instead as our installers here are a huge fan of it. They like it because of how easy it is to install and how and how well... view full answer...
We do not have pictures of the hitch installed, but we do have instructions for hitch part # 11020 for a 2008-2009 Smart ForTwo. I have included a link to these instructions. view full answer...
We can help you get set up for safely towing your 2012 Smart fortwo behind your motorhome.
A number of items are needed and you can read up on all by referring to the flat towing overview article I linked for you. I also included additional helpful articles on several of these specific components which include a tow bar, safety cables, base plates, a wiring kit, a supplemental braking system and also a high/low hitch adapter.
Starting with base plates for the fortwo, I suggest the Roadmaster... view full answer...
You are correct, the Curt Class I, 1-1/4 Inch Receiver Hitch, # C11020, is the hitch that was specifically designed to fit your 2010 Smart ForTwo 451 Cabriolet CDI.
I have included a link to the cargo carriers that we have available for use with a 1-1/4 inch hitch receiver. The only folding cargo carriers that we offer are for use with a 2 inch hitch receiver. view full answer...