Hey Mitch!
The Replacement Shark Fin Camera Mounting Bracket # FRCBRKT-BL is compatible with different cameras, but we don't have a list of what all it fits with, and Furrion will only say it works with their cameras.
We actually have a review from someone who used this same bracket with an Amtifo camera back in 2022 which I'm attaching a photo of as an example. view full answer...
Hey Drew, for the Timbren Axle-Less Trailer Suspension # ASR1200S04 you can use the etrailer Electric Trailer Brakes # AKEBRK-35-SA for brakes, and # AKHD-545-35-EZ-K for a hub and drum assembly. view full answer...
The CE Smith Bow Roller # CE29791 you found is our only roller for Skiff trailers. This is also larger at 8-3/8" and has a hole for a 5/8" shaft so you would have to have a bushing made to fit. view full answer...
The base on the # DM8550045 is completely different from the # DM8550046 so you can't simply add on the adapter for the recessed ball. However, you can swap out the base with # DM6316 and use your existing head which will save money over replacing the entire thing. view full answer...
Hey Wes, thanks for reaching out!
The 20K Curt Adjustable 2-Ball Mount - 2-1/2" Hitch # C79NR is only available with the 2-Ball platform but I do have an alternative solution for you with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-623.
This is a a different design than what we normally see with a ball mount, but it has the dual hitch balls as well as a piece that inserts into one of the receivers to make it compatible with a pintle hook setup. The Gen-Y products are... view full answer...
Hey David,
The Curt Front Mount Trailer Hitch Receiver # 31180 is only designed to fit a 2001 - 2007 Toyota Sequoia and a 2000 - 2006 Toyota Tundra.
Since you have a 1996 GMC Sonoma you need the Curt Front Mount Trailer Hitch Receiver # 31021 which is a custom fit so you don't need to do an drilling or cutting to get it installed. view full answer...
It is possible to secure your Hobie outback kayak to your 2" square tube lumber rack. The Yakima HandRoll # Y04082 will not work for this with this kind of rack though. This will be the case for pretty much any other Yakima or other brand rack since they are pretty much all made to fit the more standard roof rack crossbar shapes, none of which are a 2" square.
What I suggest doing is using a simple crossbar pad like the Malone Rack Pad # MPG314. This will fit a 2" square tube and they... view full answer...
I reached out to Curt and they said there are no fitment issues with their Receiver # C74DR on your 2023 Jeep Gladiator Rubicon Diesel. view full answer...
The correct Allen wrench for the Rhino-Rack roof rack on your 2014 Accord is the Replacement Rhino Rack Security Allen Key # SECKEY-L. view full answer...
Hi Daniel; while there is a fit for a toolbox compatible tonneau cover on your 2006 Ford F-150 with a 5-1/2 foot bed, the exact model number you mentioned isn't one of them. The only option for your truck is a tonneau from Access:
- Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A61269
This will work with 19" - 21" truck bed toolboxes. view full answer...
Hey there Randy, thanks for the question and all you need to do is replace the base of your B&W Companion 5th Wheel Trailer Hitch w/ Slider # BWRVK3400-5W to one that fits the puck system of your 2022 Ram 3500 long bed. So the only thing you need is the following:
- Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ram # BWRVB3600 view full answer...
Hey Gaven, so the correct Torklift Original Super Hitch that fits your 1999 Ford F-250 is the # TLF1002. The other hitch you mentioned is for the cab and chassis versions of the larger trucks which have a narrower frame. view full answer...
It sounds like you are needing the SnapPad EQ Compact Jack Pads for Equalizer Leveling Systems # SP24FR4. These fit the 7" EQ leveling system legs which are considered to be square with the corners cut off. They consider them squares since the lengths of each side are not all the same. view full answer...
Yes, it will so long as you have one of the following bike racks Y02473, Y02473-02475, Y02474, and Y02474-02475! The Replacement SpeedKnob for Yakima Dr. Tray Bike Racks item # 8880717 fits a mixture of 2" and 1-1/4" Dr Tray bike racks. view full answer...
While I cannot say from looking at your image that the Hollywood Racks RV Rider Bike Rack # HLY64FR will or won't fit your Sprinter van having the spare tire, I can give you some measurements that will help you to determine if it will. The bike rack itself is going to have 12" of clearance to the closest part of the rack(handle for inside bike secure to post) to the center of the hitch pin hole. If your spare tire sticks out more than 12" past the hitch pin center hole you are going to... view full answer...
Hey Mike, the closest I was able to find is the Class V Universal Weld-on Receiver Hitch # 15901. This is a universal trailer hitch that will fit frames ranging from 18" to 44", has a 15K capacity, and has 3" drop brackets.
The other option would be to use the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C37CR which has a 9" drop. view full answer...
Thanks for the picture and all of the information! The Roadmaster Tow Defender Protective Screen item # RM-4700 you were looking at only works with Roadmaster Crossbar Style Base Plates like item # RM24RR that fits your 2021 Lincoln Nautilus.
If you are using the Direct-Connect Base Plate Kit item # RM57RR you will need the Roadmaster Tow Defender Protective Screen for Towed Vehicles item # RM-4750 instead. I can't tell from the picture which one you're using.
Whichever protective screen... view full answer...
Many smaller spindles do not require a washer. Your 1" spindle on your 2k axle falls under this category. It would be great if you could add one like the # SW1000 but since it sounds like it doesn't fit you will have to continue to go without just like you did before. view full answer...
The cheapest class III hitch for your Durango is going to be the Curt Trailer Hitch Receiver # 13072 but this isn't going to be a round tube hitch. This hitch will simply bolt to the crossmember on your car using the provided U-bolts, but you are going to have to drill two 1/2" bolt holes to finish the install.
The bit more expensive option # 13297 is going to check all of those boxes you're looking for, and will require no drilling into your crossmember because it'll utilize the existing... view full answer...