Replacement SpeedKnob for Yakima Dr. Tray Bike Racks

Question

Question:

Will this work for a Dr. Tray with 2inch receiver? I didnt see whether or not this was compatible with 1 1/4 or 2inch receivers.

asked by: Michael

0

Expert Reply:

Yes, it will so long as you have one of the following bike racks Y02473, Y02473-02475, Y02474, and Y02474-02475! The Replacement SpeedKnob for Yakima Dr. Tray Bike Racks item # 8880717 fits a mixture of 2" and 1-1/4" Dr Tray bike racks.

expert reply by: Jerred H

0

Answer 1

You have a Yakima Dr. Tray Bike Rack for 2 Bikes that uses a 2" Receiver. The Yakima part number is 8002473 as we no longer carry this rack. The first 5 numbers are associated with your product part number. The other parts of the number…

view full answer...

Answer 2

The correct replacement SpeedKnob for the Yakima Dr.Tray 2 Bike Platform Rack is actually the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks part #8880717 which is slightly longer than the Replacement SpeedKnob and Wedge Assembly…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Terry, this is a great question but I would assume due to the age of your SMI system and fact you have a hybrid now that has the different braking system it won't work. 20 plus years ago the braking system you have now was not around for SMI…

view full answer...

Answer 5

The instructions for the Demco Tabless Base Plate Kit #DM77YV are being added to page but I'll also send them to you separately. In the instructions they only show that the air dam needs a chunk cut out and that the shutters would remain. The…

view full answer...

Answer 6

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV (discontinued) - Demco Tabless Base Plate Kit #DM77YV Both will fit your…

view full answer...

Answer 7

Okay Bob, so I did a bit of digging around and apparently this is a known issue that Blue Ox is aware of. The 41" distance between the mounting points is too wide and non-standard which is why your tow bars are being stretched too far.…

view full answer...

Answer 8

Here is a list of the different bulb and socket kits we currently offer. Roadmaster Tail Light Wiring Kit with Bulbs #RM-155 Blue Ox Tail Light Wiring Kit - Bulb and Socket #BX8869 Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED…

view full answer...

Answer 9

First of all you will need the Roadmaster Direct-Connect Base Plate Kit 524470-5 #RM97RR for your 2024 Ford Maverick. The item #RM39FR you found is Roadmaster part number 524465-5 which fits certain Ford Escapes. Do understand the baseplate above…

view full answer...

Answer 10

Yes, you will have to drill holes in your lower fascia to attach the plug mount that is included with the Demco Tabless Base Plate Kit #DM77YV. This is a main reason I prefer to use the Roadmaster Direct-Connect Base Plate #RM97RR as they include…

view full answer...

Answer 11

I recommend using the Roadmaster wiring for your 2024 Ford Maverick because I've found it to be the most reliable on the market. The correct kit depends on if your Maverick has LED lights or not: - LED Lights #RM38FR - Non-LED Lights #RM-15267…

view full answer...

Answer 12

Yes, it will so long as you have one of the following bike racks Y02473, Y02473-02475, Y02474, and Y02474-02475! The Replacement SpeedKnob for Yakima Dr. Tray Bike Racks item #8880717 fits a mixture of 2" and 1-1/4" Dr Tray bike racks.

view full answer...

Replacement SpeedKnob for Yakima Dr. Tray Bike Racks

Product Page this Question was Asked From

Continue Researching