For the 2015 Nissan Juke the only hitch class offered is a light-duty 1-1/4-inch Class I type such as # 24867 which fits the AWD model (as long as it is not the NISMO). This and the other Class I hitches for the other versions of the car appear on the linked page.
You can carry only 2 bikes on a Class I hitch. Even though there are bike carriers with more carrying capacity that will still fit this hitch, such as the Thule Hitching Post Pro # TH934XTR (a 4-bike rack), carrying more than... view full answer...
I have an excellent solution for you. Thule offers the Thule Passive Lock Strap # TH533. This puck and strap security system will work for you because it will be secured by your 2011 Nissan Juke's rear hatch. To properly install this lock strap you will loop it around your trunk mounted rack and by placing the puck into the cargo area of your trunk and locking your vehicle the bike rack becomes locked to your vehicle. The Passive Lock is made with steel cables that are wrapped in nylon... view full answer...
Yes, you can use a Class I hitch like the Curt # C11302 to tow your 2,000 lb trailer. I recommend this hitch if you have the 2011 Nissan Juke with front wheel drive. If you have the all wheel drive model, you will need the # C11088 instead. Both of these hitches have a maximum gross trailer weight of 2,000 lbs, so as long as you do not exceed the capacity of the hitch you will be fine.
You will also want to double check your owner's manual to make sure your Nissan Juke is capable of towing... view full answer...
For your 2015 Nissan Juke AWD the Draw Tite hitch part # 24892 is a confirmed fit and would work well for carrying a cargo carrier. The most popular cargo carrier would then be the Reese part # 63155 and a compatible light kit # 20174 if your cargo blocks your vehicle lights. I attached a review video for both. view full answer...
The Thule Passage, part # TH910XT, is the most popular trunk mount bike rack for your 2012 Nissan Juke. Thule confirms it as a fit and we have an install video of it on a 2016 Juke. I've linked the video for you.
If access to the rear of your vehicle is important while you are out riding, I recommend using a hitch and a hitch mounted bike rack. For your Juke I would recommend the Draw-Tite Class I Trailer Hitch, # 24867, if you have a AWD model and if you have a FWD model, you will need... view full answer...
When installing the Thule Gateway Pro 2 Bike Rack - Trunk Mount - Adjustable Arms Item # TH88VR
on your 2016 Nissan Juke, the fit dial setting should be placed on 9. view full answer...
I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24892 for your 2016 Nissan Juke SV FWD. With the Draw-Tite receiver you are not required to use a Stabilizing Strap # 18050 with a hitch mounted accessory, which the Curt # C11302 does require.
The Tekonsha T-One Vehicle Wiring Harness # 118528 will give you a 4-way flat lighting connector. This will be required if you will do any trailer towing, and allows you to use Auxiliary Lights # C53201 in the event a hitch mounted accessory... view full answer...
You may not need any tools at all to install the Curt wiring harness # C56124 on your 2012 Nissan Juke except a screwdriver. The connection points for the T-connectors are located in the cargo area of the vehicle and you will just need to temporarily remove some trim panels. I have included a link to the instructions which also include some pictures that show the connections in detail. view full answer...
Since the Class l hitch is installed on your 2012 Nissan Juke, there are limits concerning how many bikes can be carried on your hitch. Class l hitches are only able to handle bike carriers with a maximum of 2 bikes. Unfortunately, you aren't able to carry three bikes on a hitch mounted rack, but I may have an option for you.
I recommend the Kuat Sherpa 2.0 Platform Style Bike Rack, part # SH12G. This rack tilts rearward to allow you room to access your rear cargo area. It holds two bikes... view full answer...
Due to the difference in bumper style on the NISMO compared to the standard Juke, there are no trailer hitch receivers that fit a 2014 Nissan Juke NISMO. That said, there is still a way to carry bikes with this vehicle, which I bring up because that's the application most want a hitch for on a Juke.
To do so you can use a trunk-mounted bike rack, and a really good value is a rack from Thule, the Passage, which you can get to carry either two or three bikes:
- Thule Passage Trunk Bike... view full answer...
The Draw Tite hitch part # 24867 is a confirmed fit for your 2013 Nissan Juke AWD. The only AWD Jukes this doesn't fit are the NISMO models. Smaller vehicles like this will only have 1-1/4 inch hitches available as the 2 inch hitches are only seen on larger vehicles that would have higher towing capacities. view full answer...
For your 2015 Nissan Juke AWD, I recommend the Blue Ox Base Plate Kit - Removable Arms # BX1851. I strongly suggest using the Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube # LT37420 for this installation.
For your tow bar, I recommend the Blue Ox Alpha Tow Bar - Motor Home Mount - 6,500 lbs # BX7380. This comes with a pin and clip as well as the safety cables you will need. I recommend using the Blue Ox Base-Plate and Receiver Lock Kit - Qty 3 #... view full answer...
We have several 3-bike trunk mount bike carriers that will fit your 2013 Nissan Juke. I have included a link to all of the models that will fit your Juke.
For a good entry-level carrier I recommend the Thule Passage 3, # TH911XT. This carrier has the features you'd expect from a quality bike carrier including ant-sway cradles and padded legs to help protect the vehicle. I have linked a video review of this carrier.
For a bike carrier that will be the easiest to put on and take off of... view full answer...
Part # RHK is the replacement hardware for your Draw-Tite Sportframe Trailer Hitch Receiver # 24892. You will want to enter the part number of your hitch when ordering. view full answer...
I will be happy to recommend the parts you will need to use a cargo carrier on your 2013 Nissan Juke AWD. Starting with a trailer hitch I recommend # 24867. This hitch is rated for 200 pounds tongue weight meaning the combined weight of the carrier and its cargo cannot exceed 200 pounds. I have linked a video showing an example installation for you.
Curt cargo carrier # C18145 will work with this hitch but I recommend a carrier that has a rise in the shank to give you better ground clearance.... view full answer...
The Rightline Gear SUV Tent with Rainfly # RL110907 referenced in your question is confirmed to fit your 2013 Nissan Juke. The SUV tent featues an alligator clamping sleeve that will securely attach around the rear of your Juke. The heavy-duty straps and nylon buckles will then secure the tent to the vehicle body by using attachment points on the Nissan Juke exterior and inside the cargo area. I have attached the complete installation details that you can review and a couple images that... view full answer...
We do have a couple Class I trailer hitches available that are confirmed to fit your 2013 Nissan Juke FWD, as long as it is not the NISMO model. I recommend going with the Draw-Tite Class I Receiver Hitch # 24892. Unlike the Curt model that is also confirmed to fit your vehicle, Draw-Tite does not require the use of an additional stabilizing strap for non-trailer loads such as cargo carriers or bike racks.
I have attached the written installation instructions for this trailer hitch that... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I # C11088 is a confirmed fit for your 2014 Nissan Juke. We don't have any records of users needing to use different hangers on your vehicle with this hitch. This is an easy installation utilizing the existing weldnuts in your frame. I've attached a couple articles to assist with this install, and to my knowledge you won't have issue with your exhaust system on that model but I've also attached an article to help solve that issue should... view full answer...
Draw-Tite trailer hitch # 24867 is the hitch designed specifically for your 2017 Nissan Juke AWD. Hitch # 24892 will fit but # 24867 will be easier to install. Since you will be towing a small motorcycle trailer I also recommend ball mount # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258.
For trailer wiring you can use # 118528 to add a 4-Way flat connector to the rear of the vehicle. I have included links to videos on the hitch and wiring for you. view full answer...
Go To Results