If the tires on your fat bike are 4-1/2 inches wide or smaller, the Kuat Transfer 3 Bike Platform Rack, part # KU24FR would be a great bike carrier with the Phat Bike Adapter, part # APBK.
This carrier will hold bikes with a wheelbase up to 50 inches and a wheel diameter from 18 to 29 inches. The carrier can handle 3 bikes up to 40 lbs per bike and the carrier weighs 51 lbs. view full answer...
The center to center measurement on the bolt holes of the Curt hitch part # C11088 is 38 inches like you need to install on your 2013 Nissan Juke. We had the chance to install this hitch on a 2013 Nissan Juke just like yours and found it fit really well. Check out the install video link I attached on this page to see more info and how easy it fits! view full answer...
There is a way for you to carry a pair of 60 lb ebikes on your 2013 Nissan Juke, though there is not a 2 inch hitch available. Instead you can use the 1-1/4 inch Draw-Tite # 24867 if your Juke is AWD or 1-1/4 inch # 24892 if your Juke is FWD (please keep in mind there is no hitch available for the NISMO model of a '13 Nissan Juke).
You would then be able to use the Kuat NV 2.0 # BA12B, which fits in a 1-1/4 inch hitch and has a weight capacity of 60 lbs per bike. The carrier weighs 49... view full answer...
The Draw-Tite Class I hitch you referenced, part # 24867 is indeed a fit for AWD Juke models only.
For the front wheel drive model, you will need the Draw-Tite Class I receiver, part # 24892. I have spoken with my representative at Draw-Tite, who has confirmed the hitch as a fit for your Juke.
Due to the lowered tongue weight capacity of a Class I hitch, if you are using a bike rack, you will want to be sure to use a bike rack that is compatible with a Class I hitch. I have linked you... view full answer...
Due to the difference in bumper style on the NISMO compared to the standard Juke, there are no trailer hitch receivers that fit a 2014 Nissan Juke NISMO. That said, there is still a way to carry bikes with this vehicle, which I bring up because that's the application most want a hitch for on a Juke.
To do so you can use a trunk-mounted bike rack, and a really good value is a rack from Thule, the Passage, which you can get to carry either two or three bikes:
- Thule Passage Trunk Bike... view full answer...
The Rightline roof mounted cargo bag # RL100A20 will fit on a vehicle roof that has a roof rack or not so it could fit on your 2013 Nissan Juke. Regarding the sunroof If at all possible keep as much of the weight off of the glass as possible. If there is a little bit of the bag on the sunroof that is fine. You just do not want a lot of the weight on the glass.
Be sure to check the roof capacity before loading the bag. This information may be in the owners manual or a Nissan dealer may... view full answer...
We have 2 different hitches for the 2011 Nissan Juke for both the AWD and FWD models. Both of the hitches have a 200 lbs tongue weight capacity and a 2000 lbs maximum towing weight. You will need to check with uhaul on the weight of their trailer and the cargo to ensure you don't overload your vehicles towing limit.
The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 item # 24892 is for the FWD model.
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit... view full answer...
Yes, you can use a Class I hitch like the Curt # C11302 to tow your 2,000 lb trailer. I recommend this hitch if you have the 2011 Nissan Juke with front wheel drive. If you have the all wheel drive model, you will need the # C11088 instead. Both of these hitches have a maximum gross trailer weight of 2,000 lbs, so as long as you do not exceed the capacity of the hitch you will be fine.
You will also want to double check your owner's manual to make sure your Nissan Juke is capable of towing... view full answer...
I would recommend the Curt Class I receiver hitch, # C11135 for your 2012 Nissan Juke front wheel drive. The reason is that this is the only hitch we have at this time that is verified to fit the front wheel drive model Juke.
All of the hitches available for the Nissan Juke are going to install in essentially the same location, and one would not be more visible than another. Many people like the look of a round cross tube at the rear of the vehicle better than a square cross tube, but... view full answer...
The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24867 is not confirmed to fit the 2013 Nissan Juke Nismo or Nismo RS models. This doesn't necessarily mean that it won't fit, and can mean that has not been tested.
You are correct that the picture in question is a Nismo model, and a few customers have installed the # 24867 on their Nismo models. It seems that the main issue is the hitch pushing up on the bumper, and needing to change the exhaust hangers... view full answer...
The Thule EasyFold XT 2 E-Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount # TH903202 is the only class I bike rack compatible with a 65 lb bike. It is a customer favorite and does meet a specific need other bike racks can't achieve.
We have other bike racks rated for up to 60 lb bikes without issue which I've linked in case you have an e-bike that the battery can be removed from to get it under 60 lbs. view full answer...
The 2011 and 2012 Nissan Juke have been tested for fit using the Thule OutWay, # TH45JV and # TH56BV, trunk mount bike racks. Both of these racks will fit a 2011 and 2012 Nissan Juke. I made sure to double check with Thule and both vehicles show the bike racks fitting.
I have included a link to a video review of the Raceway 3 bike version. If you will be carrying women's, children's, or alternative frame bikes, I recommend using the Bike Adapter Bar, # TH982XT, in order to carry the bikes... view full answer...
Yes, the Draw-Tite hitch # 24892 will fit your 2014 Nissan Juke as long as it is not the NISMO version. This 1-1/4-inch Class I hitch bolts on with included hardware; the installation is outlined in the instructions which are linked for you. I also included a helpful article with tips for an easier hitch installation.
This hitch can be used with compatible Class I accessories such as bike racks and cargo carriers like the Swagman XC 2-Bike Rack # S64650 and the Curt hitch cargo basket... view full answer...
The SportRack roof rack, # SR1010, is listed as a fit for a 2012 Nissan Juke.The square bars are the same size as the Thule bars so an accessory that fits Thule load bars will fit the SportRack bars in this roof rack system. You just have to make sure that the accessories that you have will fit a center to center bar spread of 26 inches. On some ski carriers this is not an issue. But if you can tell me which carrier you have I can verify fit. view full answer...
You should not have any problems carrying two bikes with the Surco 2 Bike Carrier # SP501BR that you referenced. The gears of your bikes shouldn't interfere, but in the unlikely event they would contact each other you could have the bike gears face away from each other so that they wouldn't interfere.
I attached a review video for this rack for you to check out as well. view full answer...
The Thule Passage, part # TH910XT, is the most popular trunk mount bike rack for your 2012 Nissan Juke. Thule confirms it as a fit and we have an install video of it on a 2016 Juke. I've linked the video for you.
If access to the rear of your vehicle is important while you are out riding, I recommend using a hitch and a hitch mounted bike rack. For your Juke I would recommend the Draw-Tite Class I Trailer Hitch, # 24867, if you have a AWD model and if you have a FWD model, you will need... view full answer...
The only hitch available to fit a 2011 Nissan Juke FWD is the CURT Class I 1-1/4 Inch Hitch, part # C11135. It comes with a ball mount and pin and clip.
The Draw-Tite Class I hitch, part # 24867, you have referenced will only fit the all-wheel drive (AWD) version of the 2011 Nissan Juke. It will not fit the front-wheel drive (FWD) version.
I am including a link to the installation instructions on the CURT hitch. view full answer...
The Draw-Tite Class I 1-1/4 Inch Hitch, part # 24867, will fit your 2011 Nissan JUKE if it is an all-wheel drive (AWD) model. If you have the front-wheel drive (FWD) version of the 2011 Nissan JUKE, I recommend the CURT Class I 1-1/4 Inch Hitch, part # C11302.
There is no drilling or cutting required when installing the Hidden Hitch. It will be located under the rear fascia. You will, however, need to remove the factory tow hook and fasteners at the rear of the vehicle. I am including... view full answer...
Although the Yakima HoldUp is an excellent bike rack, it will not work with the 1-1/4 inch receiver opening that the Class I receiver for the Nissan Juke uses.
Yakima offers a replacement shank, part # Y80126 that converts the 2 inch shank to a 1-1/4, but like all of the Yakima bike racks, it is not Class I compatible.
The Class I receiver has a very low towing and tongue weight capacity, and because the HoldUp is relatively heavy and extends fairly far rearward from the receiver, the... view full answer...
We do have trailer hitches and hitch mount cargo carriers that are compatible with your 2013 Nissan Juke. If you have the AWD model I recommend the Draw-Tite # 24867 but if you have the FWD model than I recommend the Draw-Tite # 24892. I like the Draw-Tite over the Curt for your application because Curt requires the stabilizer strap # 18050 be used with a cargo carrier. Although it doesn't hurt anything (and can be beneficial) it isn't required by Draw-Tite.
Then for a cargo carrier I... view full answer...
Go To Results