Trailer Hitch and Cargo Carrier Recommendations for a 2013 Nissan Juke AWD
Question:
I am looking to hook a small cargo carrier just big enough for a twin stroller and maybe a large bag of dog food nothing too extreme.. and am unsure what parts I need to buy to make this happen. By the looks of it I need a receiver hitch, draw bar, what else? do I need a ball mount or hitch balls? Basically i would like Item # C18145 or similar to fit on my Nissan Juke SL AWD 2013 model. help, please :
asked by: The K
Expert Reply:
I will be happy to recommend the parts you will need to use a cargo carrier on your 2013 Nissan Juke AWD. Starting with a trailer hitch I recommend # 24867. This hitch is rated for 200 pounds tongue weight meaning the combined weight of the carrier and its cargo cannot exceed 200 pounds. I have linked a video showing an example installation for you.
Curt cargo carrier # C18145 will work with this hitch but I recommend a carrier that has a rise in the shank to give you better ground clearance. The only Class I hitch-compatible cargo carrier with a rise in the shank is Curt carrier # C18110. It will provide 3-3/4 inches more ground clearance than carrier # C18145. I have linked a video review of this carrier as well.
Since you will be using the hitch for a cargo carrier you will not need a ball mount or balls. Just the hitch and the cargo carrier. The carrier comes with a threaded hitch bolt as well.
Products Referenced in This Question
19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Standard Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Heavy Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Options For Replacing A Tie Down Turbo Lube 48394 Clear Oil Bath Cap
- Q&A: What Size Bolts Hold Draw Tite Hitch # 24867 to 2016 Nissan Juke
- Q&A: No Power at 12 Volt Pin In 7-Way on a 2008 Toyota Tundra
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2013 Nissan Juke Trailer Hitch Recommendation for Cargo Carrier
- Q&A: How Do I Install a Brake Controller on My 2021 Subaru Outback Wagon?
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Anti-Rattle Device Recommendations for 1-1/4 inch to 2 inch Hitch Adapter
- Q&A: Does the Pro Series Anti-Rattle Device Fit Both 1-1/4 and 2 inch Hitches
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Hitch Receiver Sizes