I have actually been asked about this distance before for the MaxxTow Tow Hook # MT70028. Although the first time it was asked they wanted to know the distance from the center of the pin hole to the start of the hook. That measurement is 4-1/8". If measuring from the front of the pin hole to the start of the hook it is 3-13/16". view full answer...
I went out to the warehouse to take that measurement on the MaxxTow Tow Hook # MT70028 for you. From the center of the pin hole to plate where the hook starts to come out is 4-1/8 inches. To the back of that plate it is approximately 1/4 inch less so 3-5/8 inches. view full answer...
For front mount receiver # 65063 you are looking at grade 10.9 metric hardware which will meet or exceed what is already used on your 2014 Ram 2500. Adding the front mount receiver will not change the capacity or structural integrity of the tow hooks. I have included a link to a video showing installation of this receiver for you. view full answer...
On the Curt forged tow hook # C45500 it measures approximately 6 inches from the center of the pin hole to where the hook dips below the bottom of the shank. view full answer...
Yes, we do! To add a front hitch to your 2024 Ram 1500 with tow hooks, I recommend the Curt item # C87FR. This hitch is custom fit and works with the Ram 1500's with or without tow hooks. This front hitch has a 2" receiver, with a 5,000 lbs towing capacity, and a 500 lbs maximum tongue weight.
I have linked the installation instructions below so you can see how to get this hitch set up. view full answer...
I checked with Curt and receiver mount tow hook, # D-325, is limited by the gross trailer weight and tongue weight capacities of the trailer hitch it is being used with. It does not have a capacity of its own.
So if the hitch is rated for 5,000 pounds gross trailer weight and 500 pounds tongue weight then the Curt tow hook will be rated the same. view full answer...
I went out to the warehouse and measured the Curt tow hook, part # C22401, and the holes are 1-1/2 inches on center.
We also have the same hook in black, part # C22411. view full answer...
The capacity of the Curt Forged Tow Hook # C45500 is basically going to be whatever the hitch it is installed in is. What that means is that if you were in a recovery situation where you were putting an extreme amount of strain on this hook the hitch would fail long before the hook. Even if the hitch is a Class IV or V. view full answer...
No, you will not. The Curt Front Hitch item # C52NR mounts below the tow hooks when installed on your 2022 GMC Sierra 2500 so you will retain them.
I have linked an installation video below so you can see what this hitch looks like once installed. view full answer...
I went out to the warehouse and pulled Safety Chain with Clevis Slip Hook # 1483-535-04. The opening at the widest point of the hook is 1-5/8 inches and at the tallest point is 2-1/2 inches. I have included a picture showing the measurements. This is likely going to work well on your 2013 Ford F-150. view full answer...
The Bulldog Winch Big Dog Hook # BDW20182 is rated for up to 35,000 lbs working load, but the actual capacity for your application will be limited by your hitch capacity and vehicle.
I researched your 2013 Ford Explorer and it has a towing capacity of 5,000 pounds, so that will be the max capacity of your hook unless your actual hitch is rated lower. You will always need to abide by the lowest rated component of the towing set up. view full answer...
The short answer is that # 46-43635-23635 is going to be rated for whatever your 2018 Jeep JK Wrangler is rated for. The winch tray is designed for use with 8K to 12K winches but your Jeep is likely going to be rated under 8,000 pounds. The tray itself is rated for 16,500 pounds line pull. The metal is about 1/4 inch thick. The tow hook # 46-3005 is rated for 12,000 pounds straight line pull.
Consult the vehicle owners manual for more on capacities of your Jeep. view full answer...
I called my contact at Curt about the Spring Loaded Snap Hook, part # C81360.
They told me the Gross Towing Weight capacity for this hook is 3,500 lbs. This is a zinc-coated steel hook and will accept chain, cable, or rope up to 5/8 inches diameter. view full answer...
I went out to our warehouse and measured the Rampage Tow Hook Kit for Jeep part # RA7505 for you. The distance between each bolt hole is 1-3/8" on center. It comes with everything you see in the photo. If you have any other questions please let me know. view full answer...
Yes, the 20K weight rating of the Blue Ox Adjustable Ball Mount with Pintle Hook # BLU25XR is the same whether you're using it as a standard hitch ball or in the pintle hook application.
This is a nice, solid piece of towing gear that I recommend securing with the InfiniteRule Hitch Lock # 34061072-D to deter opportunist thieves from getting a little greedy.
Attached are review videos for you to check out! view full answer...
Yes, it does. The Curt Front Mount Hitch item # C22NR has been confirmed to fit the Trail Boss models of the 2024 Chevy Silverao 1500. You will get to keep your tow hooks. The Curt item # C22NR actually uses the rear mounting bolts for the tow hooks to attach to your Silverado's frame.
I have linked the installation instructions below so you can see how to get this front hitch set up. view full answer...
The weight capacity of the Curt Pintle Hook with 2-5/16" Ball for 2-1/2" Hitches - 20,000 lbs # C48012 would be decreased when using a 2 inch ball. The Replacement Hitch Ball for B&W Tow & Stow Pintle Hook Combo - 2" # BWTS10051 is the highest rated at 16,000 lbs when used as part of a pintle hook. view full answer...
I do not have any information regarding the capacity of the OEM tow hooks. The 9000 lb line pull refers to the fact that the receiver is capable of pulling 9000 lbs in a straight line from the receiver opening (not at an angle from side to side or up and down). In order to install the receiver, the OEM tow hooks would need to be removed.
I do not have a photo of the receiver installed on a vehicle, as we have not yet had the opportunity to install one, but if you look at the installation... view full answer...
I went out to the warehouse and measured the holes of the Curt Tow Hook # C22411 you were looking at. It measures just under 1-1/2" (1.455" to be exact) which you can see in the diagram below.
If you have bolt holes at a different spacing just let me know and I'll see what I can find. view full answer...
The TowReady Bolt-On Pintle Hook # 63105, will work for you in the capacity that you want. It is rated for 30,000 lbs of GTW (gross towing weight). You will have to bolt this product directly to the frame of the tow vehicle or to a reinforced bumper to retain its 30,000 lb GTW as long as the tow vehicle can handle the capacity of the load being towed. Using a pintle hitch mount that attaches to a hitch receiver on a vehicle will reduce the weight capacity to 10,000-12,000 lbs. view full answer...