The Roadmaster # RM-035-1 D-ring adapters are indeed compatible with a Roadmaster Nighthawk tow bar. However, because you aren't using traditional base plates, you might have difficulty finding a good spot to attach the safety cables. In this situation, Roadmaster recommends using extensions like # RM-910648-20. You'd want to wrap the extension around the frame members just behind the bumper then attach to the safety cables.
If you decide to use the tow bar for a different vehicle,... view full answer...
We have just want you need. The correct Roadmaster base plate for your 2018 Jeep Wrangler JK Unlimited is the Roadmaster EZ4 part # RM-521448-4 which is confirmed as a fit.
This will work great with your Falcon 2 part # RM-520 tow bar.
If you needed lighting you could use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle.... view full answer...
You did your research, and each of those parts are perfect and will work for your 2018 Jeep Wrangler Unlimited Rubicon Recon. Roadmaster makes really high quality flat towing parts so that's exactly what I would go with, and the only other thing you will need are baseplates. I did verify with Roadmaster the correct baseplates that fit your Jeep, and I'll go ahead and list them for you, along with the other parts so you have an easy list to go off of:
- Base Plate Kit: Roadmaster Direct-Connect... view full answer...
Yes the Kuat NV 2.0 4-Bike Platform Rack # NV22B-NA22B will fit your Jeep Wrangler Rubicons's 2" hitch. The maximum weight the bike rack can carry with 4 bikes loaded is 160 lbs. A combined maximum weight of 242 lbs Including the weight of the bike rack of 82 lbs would be below a 2" hitch maximum weight rating.
With the Rubicon package you may run into clearance issues with the spare tire when folding the bike rack up. When the bike rack is folded up the closest point is 7" away from... view full answer...
The small box of the SMI Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251 can be mounted in any location you desire inside the cabin of the vehicle. The orientation of the box is important but the location is not. You can see it mounted in a different location at the 3:10 mark of the attached video. We have mounted it in glove boxes, the passenger side of the center console, and in the rear cargo area.
The box measures overall 4-1/2 inches long, 3-1/8 inches wide,... view full answer...
Yes, we are an authorized seller of MaxxAir products, including the MaxxFan Deluxe Roof Vent # MA00-06401K that you were looking at. This unit comes with a 2-year limited warranty on the vent assembly and a limited lifetime warranty on the dome from the manufacturer.
I have attached a couple short video demonstrations on this model roof vent that you can check out as well. view full answer...
Along with a wiring loom there are a number of different parts that are needed in order to flat tow your 2018 Jeep Wrangler Unlimited JK Sahara with a standard factory bumper, which I'll list for you to make it a little simpler:
- Base Plate Kit: etrailer Invisible Base Plate Kit # e98949
- Tow Bar: etrailer XHD Non-Binding Tow Bar # e94ZR
- Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
- Supplemental Braking System: Stay-IN-Play DUO Supplemental Braking... view full answer...
The best and easiest way to install a roof rack is via the gutter system on your 2018 Jeep Wrangler Unlimited with hard top. This is actually a very safe and secure way of installing a roof rack as I have not seen any customer feedback stating that their system has slipped off or anything of that nature. For this, I recommend going with the Thule WingBar Evo Crossbars Silver - 60" # TH711500 (or # TH711520 for Black) along with Gutter Feet # TH93ZR. The dynamic weight capacity is 175lbs... view full answer...
Since we know your Polar Edition 2014 Jeep Wrangler Unlimited uses the standard front bumper the Draw Tite front hitch part # 65069 or the Curt part # 31432 would fit and work well. The larger wheel diameter would not be an issue at all. view full answer...
The Aries ActionTrac Motorized Running Boards with LED Lights # AA3036570 use a magnetic switch that interacts with the doors on your 2018 Jeep JK Wrangler Unlimited so if you remove the doors you need to pickup the Kit # AA3020000 as well which provides a manual operating switch to activate the steps. view full answer...
For just the towed vehicle side components of the Roadmaster BrackeMaster Braking System # RM-9060 you can use the Second Vehicle Kit # RM-98160. This kit includes the needed wiring, air lines, hardware, and emergency braking system for your Jeep.
For your 2018 Jeep Sahara you will also need to add the Custom Seat Adapter # RM-88130 to ensure proper installation/performance. view full answer...
To add a tow bar wiring harness to your 2018 Jeep JL Wrangler Unlimited I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267, which is a fit for your JL. I've added links to video reviews of this part for you to check out, including an install. view full answer...
Yes, the Trailer Hitch Receiver Lock - Flush Design for 2" Trailer Hitches # e98880, can be keyed alile, thenyou can also add an anti-rattle component. You can add a manual anti-rattle like # 63080 or # RM-061 to take the noise and any movement out. view full answer...
The 2018 Wrangler Rubicon does have the wider frame rails as we've found and the correct front hitch is the # C31433 which is a bit wider than the hitch you tried. view full answer...
Yes the Saris Freedom part # SA4414B will work great with the frame styles of the Townie bikes that you have! The Saris Freedom does a great job securing bikes frames of different shapes and sizes. Additionally, this is a good paring with your Rubicon since it has a measure of 13-1/2" from the center of the hitch pin hole to the closest part of the rack when in use. It also has a measure of 10 inches when the rack is in the folded position. I attached a review video for more info on... view full answer...
Yes. The Tekonsha Primus IQ # TK90160 is compatible with your 2018 Jeep JKU, but there are no available adapters to make it an easy plug and play installation so you will need to hard wire it into your vehicle. I've linked the installation of a similar Tekonsha brake controller for you to use as a guide during installation, since the process will be identical. You will use some of the wiring that you've run when installing your 4/7 way connector during this process, but you'll also need... view full answer...
Yes, the Roadmaster Tow Defender Protective Screening # RM-4750 is compatible with the Demco Dominator Non-Binding Tow Bar # DM9511008 and their Base Plate # DM56GV on your 2018 Jeep Wrangler JK Unlimited Golden Eagle. I have linked the installation instructions below so you can see the steps involved in the installation. view full answer...
Bulldog Winch Front Bumper # BDW21022 mounts in place of the stock bumper on a 2018 Jeep Wrangler and it doesn't hang down any further to interfere with the base plates on the vehicle so it will work with the Roadmaster base plate kit part # RM-521448-4 that you mentioned. Since this base plate uses a crossbar you will be able to still use your Roadmaster Guardian # RM-4000. view full answer...
From what I could find online it looks like the Thule HideAway Awning # TH490010 is compatible with the AEV roof rack on your 2017 Jeep JK Wrangler Rubicon, you just need to use the Adapter Kit # TH490001 to mount it on your roof rack.
The adapter kit comes with brackets that will wrap around the crossbars or T-Bolts that you slide into the T-Slots instead. Max crossbar dimensions are 1.4" tall x 3.5" wide (for the brackets) while the max T-Slot width is 0.8" (for the T-Bolts). I have... view full answer...
Because you are removing the Roadmaster Invisibrake Supplemental Braking System # RM-8700 from your 2004 Jeep Wrangler, you will need to seal up the vacuum line on your 2004 Wrangler. You can do this a couple of different ways. You can leave the T-connector and then add a bolt and hose clamp to seal the hose or you can remove the T-connector and use a coupler and two hose clamps to seal the hose. The latter is my recommendation for a cleaner fix and you can use the check valve already... view full answer...