Since your 2019 KZ escape 191 bh has a GVWR of 4000lbs it should have trailer brakes installed from the factory, so you will need to have a 7-way connector and trailer brake controller on your 2019 Honda Ridgeline AWD RTL to use the brakes.
If your Ridgeline does not already have a 7-way connector installed you will need to add one using T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # 118288.
For a trailer brake controller I recommend the Tekonsha Prodigy P3 # 90195... view full answer...
I do have an option for you but the TruXedo Pro X15 Soft Tonneau Cover part # TX1430601 will only allow you to open the in-bed trunk about 80% of the way because the rails sit inside the bed around an 1" or so on each side. If you want to be able to open the trunk up all the way you will need to use a tonneau cover that mounts on top of the bed rails. I recommend the Extang Trifecta 2.0 Soft Tonneau Cover part # EX92590 because this cover mounts on top of the bed rails so you will have... view full answer...
The Curt front hitch part # C31082 that we offer for your 2019 Honda Pilot does not require any front fascia or bumper trimming to install but you will need to remove a lower fascia panel. You can trim and reinstall it if you like though. I attached a picture of what the hitch looks like installed for you to check out as well. view full answer...
The best locking tonneau cover for your 2017 Honda Ridgeline is the RetraxPRO MX Hard Tonneau Cover # RT80502. This is a retractable cover made from industrial strength aluminum which is key-lockable at any position. This cover is a simple clamp-on installation that will not require any maintenance, is made in the USA and comes with a lifetime warranty. I've added a link to a video review of this cover for you to take a look at. view full answer...
First let's get your 2019 Honda Ridgeline setup for a 7-way and brake controller. It sounds like you might have a 7-way already installed, but if you didn't the correct kit would be the part # 118288 which is a confirmed fit for your vehicle. The brake controller I recommend is the P3 part # 90195 that you referenced. This is the best performing controller and also the most advanced so it will do the best job for you overall. It has a screen that can display full words, the ability to save... view full answer...
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118778 is the best choice to add a wiring harness to your 2019 Honda Ridgeline because it is a simple installation that will only require you to make a plug-in connection at the rear of your vehicle and install provided fuses. Additionally, the harness manufacturer, Tekonsha, has a very strong reputation for creating high-quality, reliable wiring products.
I have added a link to a video review of this harness for you... view full answer...
I recommend the CIPA universal Dual-View Clip-on Towing Mirrors # 11953-2 for your 2010 Honda Ridgeline, because of the dual mirror adjustment that increases viewing area and because of how easy it is to install. This is a universal style mirror but it basically just clips over the mirror housing for an easy install that is also very secure. view full answer...
The wiring harness you have in your glovebox is also for a trailer brake controller, it has a plug which matches the one under your dash therefore all you would have to do is splice on the universal wiring harness that comes with the brake controller. The other option is to use a completely custom harness like the ones you mentioned which don't require any splicing, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3070-P which will then work great with an option... view full answer...
To install the hitch ball on an Equal-i-Zer weight distribution system you do need to use a thin-walled socket. For that we have the part # ALL643216 that you referenced which we know works well for this. It also fits the Fastway E2 kits like I think you have as well. We added this socket to our website for your exact scenario. view full answer...
The Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes # UF53-945001 that you referenced can install on your resin shed and it comes with screws but you'll also want a sealant like the # 34427034145-1. view full answer...
The trunk lid release mechanism only works one direction. The reason you need to use a power lock and unlock circuit is that you want the tailgate handle to lock and unlock. The trunk lid only has one function which is to unlock. We always recommend going with the manufacturer recommended install instructions. view full answer...
The brake controller that I recommend for you to use on your 2017 Honda Ridgeline is the Tekonsha Prodigy P3 # 90195. This is one of the easiest brake controllers to install and use, plus it has received numerous positive reviews from our customers. To install it in your Ridgeline you will simply need to use the Adapter # 3070-P which will give you a plug-in option.
If you need a 7-Way connector, I recommend Tekonsha part # 118288.
Installation instructions and some videos have been linked... view full answer...
You are correct that trailer jacks weight ratings are not for lifting the entire trailer weight and only the tongue weight. So for a trailer that weighs 5,020 lbs when fully loaded you'd be looking at only lifting about 500 lbs or so. That would mean that a 4,000 lb rated jack like you mentioned would easily work well and have more than enough capacity.
The Electric Jack part # EJ-3520-WBX that you referenced has a 3,500 lb capacity and would work great. It's a great economically priced... view full answer...
That towing package might include other things like an alternate transmission cooler or other items including the wiring. That could explain why they say its for more heavy duty towing.
To see if the brake output function reaches from under the dash to the connector at the rear one thing you can try is to run 12-volt power on the circuit in either direction. Then test the other end with a meter or test like such as # PTW2993. If it is connected all the way back, then that is one less... view full answer...
So to get the replacement mounting brackets for your Aries Bull Bar # AAB35-6001 you're installing on your 2009 Honda Ridgeline you're going to need to buy the whole bull bar as Aries stopped selling the brackets by themselves a while back.
While I know it's not the news you were hoping for, its the only option. view full answer...
The first thing I would recommend is checking the owner's manual of your 2014 Honda Ridgeline Sport to see what it says about using a weight distribution hitch. In general, a WDH is recommended if your trailer weight is more than 50% of your vehicle's GVWR (gross vehicle weight rating) or if you are experiencing rear sag and trailer sway. It looks like the curb weight of your Ridgeline is the 4,491 lbs you looked at, and the GVWR is 6,050 lbs.
The dry weight for your camper is the completely... view full answer...
I can definitely help determine if a Mad Ramp system is right for you, but I will need some information from you first. What type of ATV or snowmobile do you intend to transport? What vehicle will you be using to transport this item? Once I have this information, I will better able to help you. view full answer...
The U-Haul 5x8 Cargo Trailer has a suggested coupler height of 18". Therefore, you'll want to take this measurement and subtract this from the distance from the ground to the top inside edge of the receiver on the vehicle. The difference between these measurements will be the rise/drop you need to look for in a ball mount. I recommend adjustable since you can use it on multiple trailers, the Flint Hill Goods Adj Tri-Ball Mount part # FHG92VR is a good option which can be adjusted to a 5-3/4"... view full answer...
If my calculations are correct or at least close then if the trailer is loaded to the maximum of 3,260 pounds and the tongue weight is roughly 11 percent of the gross trailer weight then at the max trailer weight the tongue weight would be around 570 pounds after adding in 200 pounds loaded behind the rear wheels of your 2007 Honda Ridgeline. So basically the tongue weight range is 263 to 570 pounds depending on if it and the vehicle are loaded or not.
If the trailer is not loaded to the... view full answer...
The Strait-Line Weight Distribution System with Sway Control # RP66083 you referenced is absolutely the best option for your 2018 Forest River R-Pod 179 Hood River Edition because it will give you the best sway control with its dual cam system that stops sway immediately so you never have to worry about struggling to control your 2006 Honda Ridgeline when towing your R-Pod. This is going to make the journey to your destination a pleasant experience so you won't have those white knuckle... view full answer...
Go To Results