In order to use a bike rack with 2" shank on a 2015 Honda Fit such as the Thule T2 Classic you will need to use the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7273 which is the only available 2" hitch option. The EcoHitch has a super hidden design so it will look very nice on the back of the vehicle. It does actually not use any sort of class rating but class III would be most appropriate if one had to be assigned That said, so long as you are under the 300 lb tongue weight rating... view full answer...
The best option I have to carry three bikes on a 2011 Honda Fit Sport would be with the Hollywood Racks Over-the-Top 3 Bike Rack part # HRF2-3. The Over-the-Top will secure to the trunk and provide a secure attachment point for all three bikes. That said, you would need the Swagman Deluxe Bike Frame Adapter Bar part # 64005 for any of the bikes that don't have a horizontal top tube.
If you wanted to carry the bikes on the roof, you'd need an option with longer crossbars like the SportRack... view full answer...
The Kuat Sherpa 2.0 2-Bike Platform Rack part # SH12P is a great option for a 2013 Honda Fit which used with a trailer hitch such as the EcoHitch Trailer Hitch Receiver part # 306-X7286. The bike rack has a built-in rise so there should not be any issues with the exhaust being close enough to melt anything. view full answer...
The Thule Self-Tensioning snow tires you mentioned, part # TH04115075 are a fit for your 185/55-16 tires. Usually, smaller front wheel drive vehicles like your Fit specify that tire chains should be installed on the front wheels only and should be a chain that has a 'Class S' rating. A Class S rated chain will not extend any further to the inside of the tire than 15mm.
The Thule # TH04115075 chain is Class S rated.
I'd recommend you read the owner's manual, and abide by any advice or... view full answer...
The correct wiring harness for your 2009 Honda Fit Sport is the Tow Ready T-One Vehicle Wiring Harness, part # 118420. It will include the circuit protected taillight converter that is needed on your Honda Fit. You will not need any other converters or electrical parts to have a 4-flat connector on your vehicle.
The Honda Fit has turn signals separate from the brake lights and requires a converter to convert the cars 5 wire system down to the trailers 4 wire system. The converter is also... view full answer...
The Kuat NV 2.0 2-Bike Platform Rack # NV12G will absolutely work on your 2009 Honda Fit Sport.
The only thing you need is a trailer hitch if you do not have one and the EcoHitch Trailer Hitch # 306-X7286 is the best option because you aren't going to need to use stabilizing straps to support a bike rack like you would with the Curt # C11064 hitch that also fits your '09 Fit.
The Kuat NV 2.0 # NV12G, which is in a color called Gunmetal Gray but is also available in Black at part # NV12B,... view full answer...
The plastic roofline spoiler on the 2012 Honda Fit Sport makes trunk-mount bike racks a bad option since this vehicle feature is likely to be damaged by the weight of a loaded bike rack. The excellent Thule OutWay 2-Bike Platform Rack # TH65JV without bikes on it weighs about 28-lbs. Load two typical 30-lb bikes and you see what I mean about the load that spoiler.
For your Fit Sport the only good bike carrier option is a hitch mount type which of course requires you to bolt a hitch onto... view full answer...
The Swagman XC2 Bike Rack for 2 bikes, # S64650 is for a 1-1/4" hitch and rated for Class II but will fit a Class I hitch as long as it does not have the stopper/weld bead in the receiver. The Curt Trailer Hitch Receiver, # C11406 for the 2020 Honda Fit does not have this weld stop and has a tongue weight rating for up to 200 lbs. The Swagman XC2 Bike Rack for 2 bikes, # S64650 is rated for use with two bikes up to 35 lbs. each and the bike rack itself weighs about 25 lbs. (less than 100... view full answer...
You are looking for the Stealth Hitch for the 2019 Audi A4 part # 391AUDA417. The Stealth hitch features a removable receiver tube that attaches to a latching mechanism on the main body of the hitch when you want to use the receiver for 2" shank accessories like bike racks and cargo carriers. The receiver can easily be removed when it's not in use and the whole hitch is completely hidden for a clean factory look. I have attached a photo for your reference. The main cross tube and the square... view full answer...
You will need the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 to wire the 2011 Honda Fit with the separate system to flat tow it with the motor home with a combined system. I have attached a wiring diagram below of how this installs. The brake and turn signals sent by your motor home to the Honda Fit will be carried on a single wire so the Honda's brake lights will flash for the turn signals as well which is common.
If you want to retain separate turn and brake... view full answer...
In order to use a bike rack with 2" shank on a 2015 Honda Fit such as the Thule T2 Classic you will need to use the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7273 which is the only available 2" hitch option. The EcoHitch has a super hidden design so it will look very nice on the back of the vehicle. It does actually not use any sort of class rating but class III would be most appropriate if one had to be assigned That said, so long as you are under the 300 lb tongue weight rating... view full answer...
The reason is pretty simple. The Blue Ox # BX88132 is specifically designed for flat towing and has been rigorously tested for that purpose. The Patriot Hitch # PH54FR adjustable drop receiver adapter has NOT been tested for flat towing a vehicle, therefore Patriot Hitch can't recommend using the product for that purpose as they don't know how their product would preform in that application.
I've liked to product videos for both items mentioned above. view full answer...
The Curt Trailer Hitch Receiver # C11406 may also require that the exhaust hanger on your 2017 Honda Fit to be bent as this is noted in the manufacturers instructions that I have linked below.
In looking through the reviews I am seeing that there are definitely complaints of this about the Draw-Tite Sportframe Trailer Hitch Receiver # 24920. Per Draw-Tite's instructions that are also linked below bending the exhaust hanger is a mandatory step in the hitch installation. view full answer...
To flat tow a 2011 Honda Fit you'll need the following components:
Baseplate: Demco Tabless Base Plate Kit # DM9519236.
Tow Bar: etrailer SD Non-Binding Tow Bar # e34ZR. This tow bar comes with safety cables bracketed to the arms to help prevent them from dragging on the ground. The head and shank also offer a bit of adjustability to help keep the tow bar level between the motorhome and Fit.
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This... view full answer...
The Super Springs Coil SumoSprings # CSS-1168R that you referenced are the helper springs that are confirmed to fit your 2007 Honda Fit Sport. I double checked this fit with Super Springs for you.
You can order these helper springs from us here at etrailer.com! I linked these helper springs to this page just below this answer for you. To purchase these, you can click the Add to Cart button next to the product. Once the springs are in your cart and you are ready to make your purchase,... view full answer...
A 53 inch Thule AeroBlade Load Bars # THARB53 would install onto your 2011 Honda Fit in the same way that the recommended 47 inch AeroBlade would. The reason the 53 inch bar is not recommended is because it will hang over and additional 3 inches on either side of your vehicle which might cause clearance issues. For example you would be more likely to hit your head on the bar since it would be hanging over the edge of the vehicle further.
The part numbers you would need to install an AeroBlade... view full answer...
That's an excellent question, and the Roadmaster adapter will allow you to use the Swagman bike rack you asked about, as the two following parts are absolutely compatible:
- Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2-1/4" Rise/Drop # RM-077-2
- Swagman Dispatch Bike Rack # S44FR
The Dispatch has a 6-1/4" rise in the shank, so it won't interfere with your tow bar; it is also rated for use behind a motorhome and measures 29" from the hitch pin hole to the farthest part of... view full answer...
For your 2019 Honda Fit, we currently have only one trailer hitch receiver available that is compatible. I recommend the Curt # C11406 which is a Class I trailer hitch. This hitch is rated for up to 200 lbs tongue weight, but you will want to check your owner's manual to see if Honda has a further restriction. Curt requires stability strap # 18050 with any non trailer load on their Class I and Class II hitches, so you will need that strap to keep Curt's warranty intact.
There is a... view full answer...
You should have plenty of clearance between the roof of your 2020 Honda Fit and the Thule roof rack on your vehicle. This rack, consisting of theThule WingBar Evo Crossbars - Aluminum - Black - 47" Long - Qty 2, part # TH711220, the
Evo Clamp Feet for Thule Crossbars - Naked Roofs - Qty 4, part # TH710501, and the Fit Kit for Thule Evo Clamp Roof Rack Feet - 5152, part # TH145152, has a weight limit of 165 lbs. There will be approximately 4" between the roof your 2020 Honda Fit to the underside... view full answer...
The Roadmaster EZ Base Plate Kit # 521190-1 for the 2009 Honda Fit will work with other brands of towbars as long as you use a Roadmaster base plate adapter.
I have the RoadMaster Base Plates to Duncan, Karbar and EazAligner Tow Bars Adapter # RM-038. This adapter will let you use the Roadmaster base plates with the Duncan Towmatic II, Karbar and EazAligner Tow Bars.
I also have the Roadmaster Base Plate to Tow Ready Tow Bar Adapter # RM-025. This adapter will let you use the Roadmaster... view full answer...
Go To Results