What Metal are the Titan Alloy Chains Made of

Question

Question:

I bought chains from northern and they were not hardened steel 8 links detached after 150-all twisted in the side chain or simply bent and disconnected- are these chains you sell from hardened steel?

asked by: John C

0

Expert Reply:

The Titan Chain Alloy Snow Tire Chains # TC2219SCAM that you referenced are made of manganese nickel alloy which is incredibly strong. As long as you install these chains correctly, use them properly, and don't exceed their speed rating of 30 miles per hour you would not have to worry about them coming apart on you. We sell a lot of chains and haven't had any issues with these chains so I would recommend them for you.

I attached a review video for you to check out as well.

Lastly, you will want to check the owners manual of your vehicle to determine if there are any restrictions on snow chain usage.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Link size and design do make a pretty big difference and have pros and cons so you'll have to decide what will serve your 2020 Subaru Crosstrek the best. Bigger links will give a bit better traction in deep snow and will be a bit rougher so…

view full answer...

Answer 2

I am far from an expert on snowmobiles but one would have to think such a large truck with the correct tires and chains would be able to make it through up to 2' of snow assuming you have clearance on the vehicle. In regards to the type of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

What Metal are the Titan Alloy Chains Made of

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching