SumoSprings Solo Custom Helper Springs for Jeep - Rear Axle - 2" Lift Spacers
(2305 reviews)
Price: $309.99
SumoSprings Solo Custom Helper Springs for Jeep - Rear Axle - 2" Lift Spacers
Item # SSR-404-40
Our Price: $309.99
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Need help with installation?
Locate installers near me- All Info
- Reviews (2305)
- Q & A (0)
- Videos (1)
- Photos
SuperSprings Intl Vehicle Suspension - SSR-404-40
- Rear Axle Suspension Enhancement
- Jounce-Style Springs
- Light Duty
- SuperSprings Intl
1,000-lb Capacity. Replace your rear bump stops with these maintenance-free helper springs. Microcellular urethane springs cushion bumps and support rear loads to level your ride and minimize sway. Included 2" spacers accommodate lifted Jeeps.
Features:
- Helper springs upgrade your vehicle's rear suspension for improved control and comfort
- Keep your Jeep level when you're towing or hauling a heavy load
- Help to absorb bumps and shocks
- Minimize sway
- 2" Spacers are included to accommodate your lifted Jeep
- Progressive load control - springs compress according to the weight of your cargo
- Lighter loads - springs compress easily at first for soft engagement and a less bumpy ride
- Heavier loads - springs compress by as much as 80 percent for support
- Durable microcellular urethane
- Works in temperatures from -25 F to 200 F
- Resists damage caused by oils, road salts, and UV rays
- Minimal lateral expansion - springs expand and compress vertically instead of to the sides so they aren't easily damaged when operating in tight spaces
- Maintenance-free - no tubing to run or air pressure to monitor like with air springs
- No-drill bolt-on installation - springs replace factory bump stops
- 2 Springs, lift spacers, and necessary hardware included
- Made in the USA
Specs:
- Weight capacity (at 50-percent compression): 1,000 lbs
- SumoSprings will not increase your vehicle's weight-carrying capacity
- Height of lift spacers: 2"
- Limited lifetime warranty
- 30-Day satisfaction guarantee
SumoSprings work to improve your vehicle's rear suspension. 2" lift spacers are included to accommodate your lifted Jeep. These springs will bear the brunt of the weight for your lighter loads while you are traveling, whether for work or for play, and they will help to absorb the bumps and shocks that can happen on rough roads. The springs work with Jeeps that tow, haul, or have other heavy rear equipment.
Safer Driving
Carrying cargo on rough roads can cause front-end sagging as your OEM suspension system compresses to accommodate it. Your vehicle can also sway if frequently under heavy loads, as well as bottom out, which wears your suspension down. If the weight isn't even, then it jeopardizes your ability to steer and brake. These springs reduce these problems by compressing accordingly with the weight of your cargo and helping support and distribute the weight. SumoSprings make driving heavier loads more comfortable for the long haul, and they give the control back to drivers when sway is minimized. The progressive load control works differently, depending on whether you are carrying a lighter load or a heavier load. If you are carrying a lighter load, then the springs will initially compress easily and smoothly. This will create a soft engagement for the springs and a much less bumpy ride for you. If you are carrying an extreme or heavy load, then the springs will help to support your vehicle's suspension by compressing up to 80 percent.
Durability
Made in the USA, these springs are constructed from durable microcellular urethane material, which withstand the elements. SumoSprings resist any damage caused by oils, road salts, and UV rays, so you don't have to worry about them failing to do their job while you are traveling on rough road conditions. They work in a variety of temperatures, from -25 F to as high as 200 F.
No-Drill Installation
The kit is designed to install easily and replace your factory bump stops. No drilling is necessary. The springs have the ability to operate in tight, closed-in spaces. They can expand and compress vertically without taking up any room on the sides. Unlike air springs or air bags, you don't need to maintain SumoSprings. The springs will never leak, and you don't need to run the tubing or monitor the air pressure.
SSR-404-40 SuperSprings Sumo Springs Rear Vehicle Suspension Kit - 2" Lift Spacers
Installation Details
This Product Fits The Following Vehicles
- 1984 - 2001 Jeep Cherokee
Video of SumoSprings Solo Custom Helper Springs for Jeep - Rear Axle - 2" Lift Spacers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for SumoSprings Solo Rear Helper Springs Review SS28UV
Hi, everyone, Aiden here with etrailer. Today we're gonna be taking a look at the SumoSprings solo line of custom helper springs. This is gonna come in a variety of different fits, and have different styles of spring. So let's check them out and talk about the differences. Now right away, this is going to be for the rear axle. You can see we've got one installed on our 4Runner today.
That's just one of many fits available, and it's a direct bolt on installation. Now with the rear axle, it's gonna help with a number of things. In any sort of towing applications where we've got a lot of tongue weight on the hitch, bringing the back end down, and the front end of the vehicle up, it's going to help return us to a more normal ride height. Now, unlike an airbag that's adjustable where you can tailor it to each load independently, this is going to be pretty much fixed, but it will provide a lot more support, especially compared to the factory bump stops. Now, this is just an example, because every vehicle fit's gonna be a little bit different, but just the overall height difference between the factory and the SumoSprings option is going to be pretty drastic.
So with these being so much larger, they're going to make contact with the axle a lot quicker, so we get quicker engagement and support. So we don't have all of this open air between the bump stop and the axle, where if we hit a bump with a heavy load, we feel all of this bouncing, or side to side, we don't feel as much sway, because this may contact a lot quicker, and provides that support when we need it. And with the SumoSprings, there are gonna be multiple different kinds. If you're looking at different options, you'll see a blue, a yellow, and a black one, and they are different. They really differ in the density.
Overall function and fit, it's gonna be pretty much the same. For example, on the 4Runner here, one of these black ones is available, but also a blue one. It's gonna be the same fit, but they offer different support. The blue one is going to be the lightest density, the black one is the medium density, and the yellow is the most extreme heavy density. That just means as you get more dense, it provides more support, and all of the weight capacities, depending on the kits, will vary a little bit, but as a general rule of thumb, you can go by that color scheme to find out whether you need the light, medium, or heavy duty option.
Now these feature a progressive spring rate, and what that means is the more they compress, the more they're going to push back and support, and try to bring the vehicle back to its normal driving position. So the initial first bit of compression is going to be a bit softer and easier to move. So for normal day-to-day driving when you have these installed, it isn't going to be as stiff. Then as we get into heavy loads and we start getting pretty extreme compression, it's going to work harder to push back to that normal state, and bring us back to a comfortable driving position. Now as far as the construction goes, it's going to be a microcellular urethane material, as opposed to something like a rubber material. Now the urethane's gonna be very heavy duty. It's gonna work in temperatures from negative 25 degrees Fahrenheit, all the way up to 200 degrees Fahrenheit. So you can expect it to work in all sorts of weather conditions. And this material is going to resist all kinds of oil, road salt, and UV rays. So if it does make contact with the sun, it's not going to weather away, and any sort of road conditions, like road salt in the winter, isn't going to cause this to degrade over time. So whether you're looking for support side to side and limiting body roll in your vehicle, or you're looking for backend support for towing, or maybe just something heavy in the hitch like a cargo carrier, this is going to be a great way to do that. It's a maintenance-free solution, so you don't have to worry about maintaining air pressure in it like an airbag, although you don't get as much adjustability with it. I do think that trade-off is very much worth it, because once it's installed, you don't have to worry about it. The installation process is obviously going to vary depending on what kit you get, so do be sure to use our vehicle fit guide on our website to find the right kit for you and your vehicle. But that'll do it for our Look at This medium density SumoSprings solo line of air helper springs here at etrailer. Thanks for watching.
Customer Reviews
SumoSprings Solo Custom Helper Springs for Jeep - Rear Axle - 2" Lift Spacers - SSR-404-40
Average Customer Rating: 4.7 out of 5 stars (2305 Customer Reviews)
1,000-lb Capacity. Replace your rear bump stops with these maintenance-free helper springs. Microcellular urethane springs cushion bumps and support rear loads to level your ride and minimize sway. Included 2" spacers accommodate lifted Jeeps.by: Tony04/08/2023
Very easy installation in about 20 minutes. Very ingenious concept as opposed to bolt on leaf style helper springs
by: Jeremy01/04/2023
I installed Sumo Springs on our 06 Xterra right after we bought our Casita 17' trailer. The back of the X squatted a bit more than I liked. I had also noticed before some tendency to bottom out if the car was full of people and stuff. These ingenious devices are a perfect solution for me! They are about 3/4" clear of being engaged with the axle when unloaded, so the ride is not overly affected, but progressively take up some of the weight when the back end starts coming down with load. It now sits very nicely with the trailer connected, no weight distributing hitch and stuff in the back, and no more bottoming. We've put a good number of miles on the X in the last year, towing and not towing, and they are still doing the job.
I should note, the back of my Xterra is lifted about an inch with AAL springs. If that were not the case, the Sumo Springs would be engaged all the time. That will vary with vehicle.
I will also note that they are non-adjustable, unlike airbags. I kinda like that, I didn't want to mess with adjusting air pressure and such. But once they do start kicking in as one or both wheels travel, they do stiffen it up quite a bit. I mean, there's no way around that; you can't take load without stiffening the suspension. As such I think they inhibit upward axle articulation a bit when 4-wheeling, but for us that's not a big deal. Since they do not connect to the axle, they don't affect downward articulation at all.
The pics are shortly after installation, one with the car unloaded, and two with trailer and gear loaded up.
by: David03/21/2023
I believe it’s going to be a great addition to my truck when pulling our RV. Looking forward to a smoother, more even ride. I left the 2x4 blocks in overnig8ht and drove around to ensure a good seat for the springs.
by: Max 05/02/2023
I originally purchased the yellow sumo for additional support when hauling a small trailer or taking trash to the dump so I wouldn’t strain the vehicles suspension that I just replaced . I also never like to see a truck squat . Yellows were too stiff when unloaded so I got these blues sumo and it was a great decision . The ride type is back to original “comfortable” and the sumo still provides great handling when cornering reducing body sway / shock absorbing bumps. A good investment !
by: Kenneth02/22/2023
Gave it 5 because of ease of install - note they use SAE threads 9/16, truck frame and oem is metric 15mm wrench. Makes no difference but don't use oem nuts on spring. I installed all shims supplied and this left about 3/4" gap so hoing its the best for my needs. Easy to reduce if needed.
by: Greg 05/31/2023
These were shipped to me mid-trip so I had a good chance to do a before and after with same loads/ same roads for 3100 miles. They were easy to install (in my daughters driveway) in about an hour with one reluctant bolt in the original bump stop. I did not install the hard spacer, I figured I’d add it later if needed. I was able to do the install w/o jacking up the whole truck using a 1 1/2 ton jack under the hitch receiver w/ a jackstand next to it. I needed just a few inches as there’s lots of room under the stock height truck (I was lying on a piece of cardboard). The helper springs didn’t quite touch the axle when the jack was removed. When I first drove it in town with the Sumo’s on it they were not really noticeable. When loaded up with my 22’ Livin’ Lite Axxess trailer (4300lbs with 650lb hitch weight) the rear end would squish into the overload springs a good 3/4” but the truck was about level w/o rear end sag.
Driving home over many of the same roads I noticed it was better over railroad crossings and rhythmic bumps on the highway that previously pitched it fore and aft. The trucks manners were much better overall during big hits (like hitting a curb- yup) and pulling off-highway. The trailer is low so it doesn’t go very far off road so I can’t report on that.
Overall for ease of ordering, of install, simple usage w/o need of airlines and effective control of the rearend of the truck and the trailer I feel they deserve the 5 stars.
by: Mike B04/23/2024
I bought and installed the 1000lb Sumo Solo springs to help alleviate rear end squat on my 2024 GMC Canyon Denali when pulling my boat. My boat trailer has a long mono tongue with no weight distribution installed. The boat weighs in at about 5500lbs, the truck fender lip measures 38” high unloaded, once I dropped the hitch down on the ball and the Sumos picked up the load, the fenders measured 36.25” equating to an inch and 3/4 squat. Empty the Sumos have an apx gap of 7/8” above the frame rails. The Sumos were recommended over the Timbrens for my situation of infrequent towing with this truck and to maintain the best ride possible when not towing. So far my ride is virtually unchanged when empty and feels controlled when towing. Installation is straight forward but the instructions could be a little clearer with a diagram showing the intended location of the springs. Luckily an etrailer customer had already done the install and provided some pics so there was no question. I chose to remove the tires to have good access and I’d do it again this way. I supported the truck with a jack stand under the receiver. IMHO the proper method to locate the over frame upper clamp brackets is to push the forward clamp as far forward until it contacts the bed stiffener and you’ll be in the correct location then let all the hardware hang to position itself, tighten as required and enjoy.
by: Dan08/01/2023
These Sumo Springs were easy to install, even for a 70 year old guy. I tow a 7,000lb camper and even tho I have a nice WDH I still had som sag on my Tundra. These helped level it out when towing and got rid of “some” of the bounce. They were really a godsend when I overloaded the bed with about 2,000lbs of pavers. That weight squished the Sumos significantly but the truck drove and rode great. Better and less expensive than air bags.
by: Thomas07/09/2022
The SumoSprings Solo came to the RV Resort today. I installed them on my Titan SV today in less than an hour. Only drove 10 miles with them and they are what I was looking for. In my opinion it was a needed upgrade and thumbs up!
by: Lyle 06/02/2023
Big difference in pulling the rv. I have about 545 lbs of Tongue weight.The sumo springs help with the swaying.Thanks again.
by: William01/13/2024
I have had these on my Jeep Gladiator for over a year now and I still like them. Sumo Springs really help with sag when towing my Scamp camper trailer and when the truck bed is loaded with stuff. When it is cold outside they are stiffer and I can feel when they hit the stops on hard bumps. Sumo Springs are a very easy overload spring option with factory lift.
by: Zach01/24/2024
While these worked great for the first few months and helped level the load, they have now become deformed and squished out of shape permanently. We have a slide in camper that is on the truck for only for trips otherwise the truck is unloaded and off the bumps. I did not expect them to deform so much, and so easily after only a year of use.
by: Wes 06/02/2023
Works great on 2020 ford ranger. Left out the extra spacer because I don't want it riding on the leaf spring all the time. This gave it almost an inch clearance before the sumo touches and starts to help. That is what I wanted to not have it as stiff initially offroad, etc.
by: Curt03/16/2024
Fairly simple to put on but need to work around the brake lines and bed cross beams. I haven’t tried it yet with weight. I have enclose pic of drivers side. Maybe can’t tell from the pic but there is space and flexibility around the lines around bolt.
by: Mike W06/03/2024
Works great when I tow my 11,000lb. 5th wheel camper with 1800lb. hitch weight. A bit stiff for everyday driving and hauling of my enclosed utv/snowmobile trailer, so I remove themin the fall.
by: Louis 04/17/2023
Great upgrade from the oem jounce. Easy to install with 2 people but follow the install video and use a 1/2" deep socket with a long extension. Took about 30 minutes.
by: Darryl 03/06/2023
Straight forward, simple, replacement for OEM springs. These springs make contact with the lower arms all the time and definitely help dampen the bounce effect from a heavier steel bumper. Any rolling effect from uneven roadways and turning is also reduced, it feels the vehicle is more stable. For my situation, this is the first step to take before considering replacing shocks, etc., and is very economical. I'll give it more time, but I believe this is all I'll need to do. Thanks etrailer! Quick shipping!
by: Cesar04/21/2024
These 1ton trucks are heavy, I went with the 8k front sumo springs. If you're lookingto soften up your ride all I can say from my experience, get you the medium to light rated sumo springs. I installed the timbren bump stops in the rear because I haul freight for a living & the front 8k sumo springs are overkill. When you hit good dips or bumps in the road its a ricochet effect.
by: Kevin 04/29/2024
They worked pretty good. They kept my vehicle from bottoming out when towing my 5th wheel camper. They also helped to avoid bucking and chucking upon acceleration. In addition to these though I also purchased RAC rear suspension enhancement springs but having towed with them yet. Hoping for some improvement in general handling.
by: Robert04/04/2024
Hello, i installed the Sumo springs on my 2020 M/B 2500 pleasure Way camper van 19.5 foot, if you do not want to go in for the full suspension upgrades for 5 to 6 thousand dollars the Sumo spring is a
decent up grade to help with sway, we aren’t off roaders campers
but they work nice in unimproved campsite. I have about 4500 miles on my camper since I installed them which took about a hour. It did raise the camper by about 1/4”.
I just used a floor jack and big flat screw driver for the back and deep well socket for the front ones. Sorry I didn’t take a video or picture. But so far I would recommend the sumo springs it is better then stock bump blocks.
And thanks to etrailer for getting me the right setup
for my camper.
by: Jonathan 05/30/2024
These made a huge difference. I towed a travel trailer and the roads around me are pretty horrible. These springs made a big difference in our ride comfort and I couldn’t even tell they were there when unloaded. I highly recommend these if you tow on a regular basis.
by: Tom 05/12/2024
The Supersprings smoothed out the camper trailer ride especially noticeable on bumpy roads. A good product that does what it’s supposed to do. If I ever get another camper I’ll get Supersprings again.
by: John 06/03/2024
The ride on my E-450 Thor Quantum RV is soooo much better with the Summo Springs front and back. The Thor Quantum WS31 is a large RV and felt top-heavy from the first time I drove it. I installed the SSF-106-47's on the front and SSR-130-54's on the back. Along with the Bilstein steering stabilizer, this thing drives like a new truck. Very happy with the mods! I am also an etrailer.com fan. Ordered the rear springs on a Friday morning and they were at my door by noon on Monday. The etrailer staff provided updates including tracking number and status updates along the way. Great products and great service!
by: Preston08/22/2022
Very impressed. Stopped the Tacoma lean. Also helped with the trailer. I do use a distribution hitch I bought from etrailer. Just bought the sumo spring for other applications. Those little bitty factory bumps where junk. These help with lean, and off road hard bounce.They are great.
by: Barry08/06/2020
We pull an off-road teardrop camper with our 2013 Toyota Tacoma and were looking for a little help with the rear end sag when we have that hitched plus putting some weight in the back of the truck (firewood, water, etc). Our Tacoma is lifted (2.5") but the lift kept the stock springs with an added Deaver leaf to help with the notoriously soft Toyota springs. However, with the shell and ~300 pounds of weight in the back, it still sagged, especially with another 250 lbs of tongue weight from the trailer. The Sumos have eliminated that sag, even with bigger loads in the bed, eliminated body roll (also notoriously bad with Tacomas) and didn't destroy the ride for day to day driving. There might be a slight bit more stiffness when hitting speed bumps, but definitely not bad at all. If anything, I would say it IMPROVED the ride and handling.
The springs themselves were simple to install, less than half an hour start to finish. Some reviews have said they were bumping the frame after installing but we had about 1/2" gap on both sides. The only "specialty" tool would be a torque wrench capable of 90 lbs to get it to spec.
We considered Firestone air bags but after talking with the reps at e-trailer, we decided on these and couldn't be happier. Reasonably priced (half the price of air bags), no maintenance, great customer service...can't argue with anything at all.
25
2211
Show More Reviews
See what our Experts say about this SuperSprings Intl Vehicle Suspension
Info for this part was:
Edited by:
Leah B
Video by:
Andrew K
Video by:
John S
Video Edited:
Chris R
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Matthew E
Updated by:
Noah M
Installed by:
Robert C
Installed by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.