Call etrailer.com at 1-800-940-8924 for expert service. We are your Chevrolet transmission coolers experts, and offer a great price. etrailer.com carries a complete line of Derale products for your Chevrolet Silverado 2010. Derale Hyper-Cool Remote Transmission Cooler Kit w/ Fan, -6 AN Inlets - Class V part D13960 from Derale can be ordered online at etrailer.com. Complete transmission coolers installation instructions and technical support.
All Info
Reviews (16)
Q & A (0)
Related Parts
Photos
2010 Chevrolet Silverado - Derale Hyper-Cool Remote Transmission Cooler Kit w/ Fan, -6 AN Inlets - Class V
Remote Cooler
With - 6 AN Inlets
13W x 10T x 5-5/8D Inch
Derale
Remote Mount
13" Wide x 10" tall x 5-5/8" deep, fan-mounted, remote cooler has the most efficient type of heat exchanger core, a stacked plate, and a 500-CFM, reversible tornado fan to ensure optimum airflow.
Features:
Improves performance and overall functioning of transmission
Has super-efficient, stacked-plate cooler core for optimum heat transfer
Most efficient cooling system with the large surface area of the stacked plate design and turbulator technology
Furnace-brazed aluminum construction for great heat dissipation
Offers superior airflow with 500-CFM, reversible tornado fan
Designed with clear, anodized aluminum shroud for additional durability
Mounts anywhere with aluminum mounting brackets
Includes:
Complete cooler assembly
Aluminum AN fittings
Brass hose-barb adapters
180-Degree, in-line thermostat for power-saving fan shut-off
10' OEM spec hose with stainless steel clamps
Additional compression fittings
All necessary mounting hardware
Made in the USA
Specs:
Inlets: -6 AN
Adapters: -6 AN x 3/8" hose barb
Overall dimensions: 13" wide x 10" tall x 5-5/8" deep
Distance between inlets: 10"
Electric Fan Rating: 4.8 amps
Thermostat Switch Rating: Maximum of 15 continuous amps
Mounting dimensions: 7-1/2" wide x 9" tall
1-Year warranty
Stacked-plate heat exchangers have long been considered the most effective type of oil or transmission coolers, primarily because of their increased surface area. Allowing fluid to spread out over this larger surface area decreases the time required for heat transfer to take place. As a result, plate coolers typically manage to cool a greater volume of fluid faster than tube-and-fin, or even plate-and-fin, varieties. Add to that a powerful tornado fan that ensures optimum airflow at all times, no matter the environment, and you have a super-efficient heat exchange unit.
13960 Derale Hyper-Cool Remote Transmission Cooler with Installation Kit
Derale Hyper-Cool Remote Transmission Cooler Kit w/ Fan, -6 AN Inlets - Class V - D13960
Average Customer Rating: 4.8 out of 5 stars (16 Customer Reviews)
13" Wide x 10" tall x 5-5/8" deep, fan-mounted, remote cooler has the most efficient type of heat exchanger core, a stacked plate, and a 500-CFM, reversible tornado fan to ensure optimum airflow.
by: M Gutierrez07/26/2013
2007 Ford F-150
Awesome product! Received it yesterday. Custom fabricated brackets for it to mount below my auxiliary trans cooler on my 07 fx4 f150. Installed the on off switch on out side of transmission and the fan works great! 91798
excellent quality product, I have intalled the fan/cooler on a toyota highlander 2010 without tow package not infront of the a/c radiator but exactly at the same place as toyota install the oem transmission cooler just behind the right fog light. I have a travel trailer of 3300 lbs dry, (4000lbs gross weight) and before my transmission temperature was around 215-220 F with a standard transmission cooler(without a fan) infront of the a/c radiator, but now with my new derale fan cooler, its around 180F after a long climb. I am totally satisfied. I had to build a bracket to fit the cooler in this tiny space behind the fog light, it took me 6-7 hours .141122
by: Freeman10/02/2017
Mounted between fuel tank and transfer case. Larger 6.0 cooler would go in front of intercooler. Dont need anymore heat there. This was cheaper and works great in this position. Wrapped exhaust near the lines as they have to dump out on right side of trans. and I did not want any hard 90 degree turns with all this extra plumbing. Keeps temps way lower. Also installed oversize/cooler pan.
FYI using temp sensors in pan and in valve body. Pan is regularly 30 degrees cooler than valve body.438701
by: Alan04/14/2019
Easy install, and works as specified. Would put on future high performance vehicles628527
by: Chris 01/04/2021
Have not installed it yet, but looks impressive! This this is like a beast cooler. Will be installing it this week before a long distance rv trip.933682
by: Nelson 09/10/2022
2015 Toyota Tacoma
Nice product 1401457
by: Tomas03/06/2018
Great product and prices really awesome service 481804
by: Matthew Johnson09/24/2019
I was very impressed on quality and ruggedness. Its heavy and works great. This is a must in South Texas especially pulling a trail. 707159
Love my engine oil cooler. I was having overheating problems with my Dodge truck while towing on a hot day. I asked the guys at etrailer if I should add a bigger radiator, and engine oil cooler or another tranny cooler. They nailed it when they recommended a supplemental engine oil cooler. I now can town my fifth wheel RV trailer on the hottest days and in the mountains without overheating. I do still have to watch the temps and if they start to get over 260 f or so I downshift a gear or two to get greater fluid flows. The only reason I am not giving this 5 stars is that with the supplied hose clamps I was plagued with constant slow leaks. I finally bought a much higher end hose Clamp which did solve the problem.268306
by: Blaine01/14/2020
I was surprised at the lack of feedback on these products, and the differences in opinions. I tow a fare amount, between 7000lbs and 9500lbs. My vehicle is a 2013 Dodge Ram 1500 with the 8 speed transmission. ( outside temperature 20-30 deg Celsius ). Before I installed this engine cooler my temperature ran around 115 deg Celsius on a flat pull and 130 - 135 deg Celsius on most hills. After a hill it took a long time to drop in temperature, most time it hardly dropped. Now I rarely see 115 deg Celsius on a hill, and recovers to 100 deg Celsius very quickly. So in short I'm very happy with this product. I would recommend it to anyone that Tows.738161
by: Eric 07/28/2020
Excellent product, quality parts and fittings for multiple installation platforms. Took about 4 hours to install but was a custom install under bed of truck. 851881
by: Doug10/18/2015
Appears to be well-built and wasn't too hard to plumb in series with the existing oil cooler. Unfortunately with my 2010 Suburban it did not make any difference in the oil sump temperature shown by the computer - either daily driving or while towing. I plan on borrowing a laser thermometer to see what the actual input/output temps are.230261
by: Oscar04/27/2017
Great product. Keeps transmission oil cool. Happy with my purchase373174
by: Joseph 07/24/2020
Arrived today. need to find time to install. Looks great. box was untaped but I think everything is here. It looks like a quality product. Excellent so far!850448
by: Mike S.08/25/2013
Easy install very high quality product. 96820
16
16
See what our Experts say about this Derale Transmission Coolers
A supplementary transmission cooler is an excellent addition to almost any towing vehicle and we have options for your 2012 Chevrolet Suburban 5.3L.
If you have the specific transmission model 4L80E in your Suburban you can use pan-style cooler # D14207 from Derale. The benefit of a bolt-on pan cooler is that you actually add fluid capacity to your transmission system. This item does not simply radiate away heat like # D13503; it both radiates heat away and cools additionally by letting... view full answer...
I contacted our representative at Derale and he informed me that the Derale Hyper-Cool Remote Transmission Cooler Kit With Fan, part # D13960, can be amounted anywhere. Since it uses a fan for cooling, it is not necessary to use the radiator for cooling as the fan is strong enough to provide cooling power.
It may be beneficial for more cooling efficiency if you can mount it in front of the radiator, behind the bumper, but it is not required. Transmission fluid cannot be cooled too much... view full answer...
Generally speaking, you won't want to run a larger line into a smaller opening with an adapter because the difference will create a buildup of pressure that will likely cause the line to burst, but running a smaller inlet into a larger port is possible. I checked with Derale and they mentioned that running a smaller line into a larger port just means that not as much fluid is going to be pushed into the cooler and it will run less efficiently, but it won't damage the cooler.
Derale does... view full answer...
I have attached a list of parts that I recommend for your 2005 GMC Sierra 2500 to help with cooling both the engine oil and transmission fluid while towing.
Derale Hyper-Cool Remote Transmission Cooler Kit part # D15960
Derale Hyper-Cool Remote Engine Cooler Kit part # D15660
Derale Snap-In Radiator Adapter Fitting part # D13035
Derale High-Temperature Replacement Hose part # D15799
Derale Stainless Steel Hose Clamps part # D13008
1/2" Barb to 1/2" Barb Union Fitting part (Local Auto... view full answer...
-6 AN fittings are a specific threaded fitting size. The Derale Hyper-Cool Remote Transmission Cooler Kit w/ Fan, -6 AN Inlets - Class V # D13960 has the specific fittings you mentioned but it also comes with the barb fittings that simply use a hose clamp. On this cooler, the lines attach to the sides of the cooler. This transmission cooler has internal turbulators for superior heat transfer. I've attached an installation video of a similar transmission cooler for you to view.
For... view full answer...
For your 2013 Sierra 1500, I recommend mounting the Derale Hyper-Cool Remote Transmission Cooler Kit w/ Fan, -6 AN Inlets - Class V, # D13960, using your second option. I'd leave the stock cooler alone and mount the Derale cooler with fan in front of the passenger wheel well. The stock cooler location will allow that cooler to function at its potential and then you can add the Derale cooler, which can function almost anywhere with its attached fan to further cool your transmission. This... view full answer...
We currently have 6 transmission coolers that are recommended for your 1996 Ford F-250 with 7.3 liter diesel engine. I have included a link to them below. Even though the Derale Hyper-Cool Remote Transmission Cooler Kit with Fan, -6 AN Inlets - Class V, # D13960, is not on that list, transmission coolers are not technically vehicle specific, so you could install it on your truck with the proper sized fittings.
The D13960 comes with -6 AN x 3/8 inch hose barb adapter and one of the recommended... view full answer...
A large cooler like # D13105 that you have referenced would be a good choice. The larger the cooler and the more airflow it can get the more efficient it will be in cooling the transmission fluid. You may also need to add fitting # D13025 so you will not have to cut and flare lines.
But I think you would benefit more from a remote cooler that has its own fan like # D13960. That way you will always get the optimum amount of cooling all the time. I have included a link to our FAQ article... view full answer...
I verified with my contact at Derale that the Derale Hyper-Cool Transmission Cooler, # D15960, will work to bypass your radiator and cool your transmission fluid. One important thing to consider when installing a transmission cooler is the size of your transmission lines. If the diameter of your transmission lines are 1/2 inch in diameter, then you will want to go with the transmission cooler that you referenced. If your transmission lines are 3/8 inch in diameter, then you will want the... view full answer...
We definitely have had people install an aftermarket transmission cooler on their Nissan Pathfinder before so it is possible, but I would be surprised if that was something that Nissan would be okay with under their warranty. It is our understanding that the transmission cooler is actually inside the radiator.
If you were to go this route then you will need to find the largest aftermarket cooler you can find. For this application I recommend the Derale Hyper-Cool Remote Transmission Cooler... view full answer...
Since transmission coolers are not vehicle-specific you'll want to compare the dimensions of the Derale Hyper-Cool # D13960 (13- wide x 10- tall x 5-5/8-inches deep) to the available mounting locations in your engine compartment. Flexibility in mounting point is one of the advantages of a fan-powered cooler. Since they don't rely on passive air flow for cooling they'll work effectively almost anywhere you can fit one.
Coolers like this Derale Hyper-Cool are intended to supplement the OEM... view full answer...
Since you want to cool both engine oil and transmission fluid for a demanding off-road racing application I suggest you go with two separate coolers rather than a dual-core combination cooler.
My contact at Derale confirmed the best options for your FJ Cruiser are their # D13960 Class V fan-powered Hyper-Cool Remote Transmission Cooler and their # D15660 Hyper-Cool Remote Engine Cooler. Derale runs their own off-road racing events and my technical contact was very clear that for your... view full answer...
The motor by itself is not available for Derale Hyper-Cool transmission cooler # D13960. You would need the complete fan assembly # D16618. view full answer...
It would be best to use a transmission cooler as a supplemental cooler to the factory transmission cooler. But if you have to bypass the factory cooler you will need to plug the input/output outlets at the radiator and use a remote cooler such as # D13960. I have included a link to the installation instructions for you. view full answer...
For a fan-powered remote transmission cooler for your 2009 Toyota Sienna I recommend the Derale Class V Hyper-Cool # D13960.
This high-efficiency stacked-plate cooler kit includes the cooler, fittings, hose and all hardware required for installation. The fan's 500-CFM (cubic-feet-per-minute) airflow cools your transmission fluid no matter your driving speed, unlike passive coolers like the Derale # D13503 that rely on air flow from your driving speed to cool your transmission.
The written... view full answer...
According to my contact at Derale the Derale Hyper-Cool Remote Transmission Cooler Kit with Fan # D13960 has the following amp ratings:
The electric fan rating is 4.8 amps.
The thermostat switch rating has a maximum of 15 continuous amps. view full answer...
You mentioned wanting the best cooler for your 2003 Chevy Silverado. The best, as in the most amount of cooling, is going to be a remote cooler with its own fan like # D13960. It does not matter where this cooler gets mounted because its fan offers the optimum amount of cooling all the time.
Otherwise for a standard cooler that would require air flow I recommend # D13105. Its large surface area will provide plenty of cooling for your trucks transmission. To avoid cutting and flaring lines... view full answer...
We can help you with a supplementary transmission cooler for your 2009 Nissan Armada SE 2WD to reduce its operating temperature when you tow your new Forest River travel trailer.
For a standard passive cooler that mounts in front of your AC condenser I suggest the Derale Class III model # D13503. This will provide significant additional cooling of your transmission fluid. For a higher-capacity passive option the Class IV model # D13613 is a good choice.
If you happen to often tow in the... view full answer...
There are different that fittings you will need for your 2002 Jeep Grand Cherokee with a 4.0L engine than the ones you mentioned in order to install the Derale Hyper-Cool Remote Transmission Cooler Kit # D13960.
Your '02 Grand Cherokee should have a 3/8" rubber hose (though I do recommend verifying this), so what you will need instead is the Derale Radiator Adapter Fittings for Dodge and Jeep # D13028. view full answer...
The Derale Hyper-Cool Remote Transmission Cooler Kit # D13960 would be an outstanding choice to add to your 2020 Toyota 4Runner with a 4.0L V6 engine. The reason is because it's a stacked-plate cooler, which means it gives you the most surface area with which to cool fluids.
As for mounting, there isn't a recommended or suggested spot on specific vehicles for these types of coolers. They are designed in order to fit in any location where there is space, and an experienced installer will... view full answer...
Yes you could install the Derale HyperCool Remote Mount Transmission Cooler part # D13960 in front of your radiator. To reverse the direction of the fan you'd just need to reverse the polarity of the wires for it and you'd be set. view full answer...
Both the Derale transmission coolers you mentioned would work great installed on your 2010 Chevy Silverado with a 4.8 liter V8. The part # D13960 is the more efficient style of cooler as it has a stacked plate whereas the # D13950 is a plate and fin cooler which is still really effective but not quite as effective as the stacked plate. Now both of these are easily more powerful than you'd need to get the job done so if you go with either you'll have very cool transmission fluid that will... view full answer...
For a fan-powered transmission fluid cooler for your 2011 GMC Sierra I recommend a high-efficiency Class V stacked-plate type remote cooler from Derale, their Hyper-Cool # D13960. You'll also use Snap-In Radiator Adapter Fitting # D13035.
The Hyper-Cool measures 13- wide x 10- tall x 5-5/8-inches deep and it will draw a maximum of 4.8 amps. The Hyper-Cool offers a powerful 500-cubic-feet-per-minute air flow, and is reversible. All required mounting hardware is included. This cooler is USA-made. view full answer...
It is usually the other way around with factory transmissions coolers in radiators. By that I mean that normally you see a problem with the factory coolers, not the aftermarket replacements. It is possible to bypass the factory cooler in the radiator by blocking off the input/output locations for the transmission cooler on the radiator.
You would then need to mount the largest possible cooler that you can get to fit or install a remote cooler with its own fan. The Series 9000 Plate-Fin... view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.