Call etrailer.com at 1-800-940-8924 for expert service. We are your Chevrolet transmission coolers experts, and offer a great price. etrailer.com carries a complete line of Derale products for your Chevrolet Silverado 2010. Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient part D13611 from Derale can be ordered online at etrailer.com. Complete transmission coolers installation instructions and technical support.
All Info
Reviews (83)
Q & A (0)
Related Parts
Photos
2010 Chevrolet Silverado - Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient
Plate-Fin Cooler
With 1/2 Inch NPT
11W x 3-7/8T x 1-1/4D Inch
Derale
Standard Mount
11" Wide x 3-7/8" tall x 1-1/4" deep, radiator-style heat exchanger improves the performance and overall functioning of your Chevrolet Silverado's transmission. Includes hose-barb adapters to fit the 1/2" NPT inlets.
Features:
Prolongs life of transmission
Improves overall performance
Prevents heat-related failures
Has furnace-brazed aluminum construction and 1-1/4" wide turbulator plates for more efficient cooling
Includes complete mounting kit, OEM spec hose with stainless steel clamps, Insta-dapt radiator adapter and hose-barb fittings
Sleek design makes this ideal for use in compact cars
Specs:
Inlets: 1/2" NPT
Fittings: 1/2" NPT x 3/8" hose barb
Overall dimensions: 11" wide x 3-7/8" tall x 1-1/4" deep
Distance between inlets: 8-7/8"
Mounting dimensions: 6-3/4" wide x 3" tall
1-Year warranty
Note: The Derale Insta-dapt radiator adapter fits most vehicles with 5/16" transmission lines, but not all. In some cases, additional fittings or alteration of the OEM lines or hoses may be required for installation.
One of the more popular cooling systems available, the radiator-style, plate-and-fin heat exchanger provides increased surface area so that fluids can spread out along the finned chambers to cool faster. In addition to the increased surface area, this cooler also features turbulator technology, whereby fluids are agitated continuously, not only to facilitate heat transfer, but also to prevent any undesirable drop in pressure.
13611 Derale Series 9000 Plate and Fin Heat Exchanger with Installation Kit
Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient - D13611
Average Customer Rating: 4.7 out of 5 stars (83 Customer Reviews)
11" Wide x 3-7/8" tall x 1-1/4" deep, radiator-style heat exchanger improves the performance and overall functioning of your vehicle's transmission. Includes hose-barb adapters to fit the 1/2" NPT inlets.
by: lopez07/30/2014
2006 Dodge Dakota
i recived my Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient - D13611 and i really like it its well built and it look to be heavy duty and am looking forward to installing it.thanks again for a great item.
143509
Lopez
7/30/2015
Its excellent inproved the performance of my truck 100 I am a very satisfy customer.
by: 7502yuma 01/11/2017
1999 Chevrolet Corvette
I have been happy with the Derale transmission cooler. Installation was simple enough and one year later it is still working fine
331664
7502yuma
1/14/2018
I actually have been very pleased with the performance. That was my third installation and all of them are working great . Thanks for asking.
by: Earle 09/10/2022
2014 Ram 1500
This oil cooler has really helped improve the oil pressure in my GEN III Hemi by reducing the oil temperate approximately 20 degrees cooler than before we installed it. Excellent product by Derale and service by etrailer.com.1400952
by: Steven07/12/2019
The cooler was easy to install,the instruction were easy to follow. I did check the oil temp after pulling a 4000 ft grade pulling a camp trailer with an electronic temp probe and there was a 50 deg temp drop thru the cooler. 669243
Steven
7/14/2020
worked as described
by: John C.11/18/2014
1990 Dodge Ram Pickup
My original transmission cooler sprung a leak on my 1990 dodge pickup and a direct replacement couldn't be found. Etrailer had a cooler that would fit and do the job. Would highly recommend them to solve your problems and supply what's needed.161616
by: David 06/13/2021
Hose could be a little longer for non professionals cutting too short. I would recommend buying extra hose too install. Overall easy too install and works great1064354
by: Cristobal Estebane 08/15/2015
2012 ChevroletSilverado
Fittings came contaminated with metal shavings from machining and wouldn't even fit in to the cooler really poor quality. If this is in the fittings who knows whats in the cooler. Complete waste of time do not buy219532
by: mike03/23/2015
2007 Toyota 4Runner
would have been been better had the shipping dept. not covered a lot of the info printed on the out side of the box with NON-removable stickers.180167
by: Mike 09/22/2020
The order I received was what ordered I’m happy to see it quick delivery and fast thanks for service I will dealing with you in future for other parts thanks ago excellent job. Mike886990
by: Jason 01/05/2021
Came quick and as described !
I plan to order more products from etrailer very soon933981
by: terri h05/27/2014
2011 Subaru Forester
Pretty easy to install. Arrived quickly too! I am happy with this purchase.132429
Terri H.
5/28/2015
Patrick, the product is fine. I have no complaints. Thank you, Terri
by: Kenny12/17/2016
2002 Chevrolet Avalanche
Great product, works, fits perfectly. It s everything I was expecting.
325843
by: Carmen11/28/2021
RETURNED DID NOT NEED. 1213416
by: steve06/01/2016
2001 Nissan Frontier
all re my bad all was in lg box separate small boxes255440
by: Leo04/25/2017
worked as described 371890
by: Dan11/14/2017
Arrived quickly, install was not too di fficult.451751
by: Skyler C03/10/2014
Perfect. Your company rocks. So helpful. Thank you.120118
by: William B06/11/2013
Extremely well made product. 84081
by: Zack Martin10/03/2015
Great product at a good price. 228996
by: Taras Chubenko05/31/2017
2010 Nissan Altima
Unit received as promised. Thank you! 386881
by: Jerry 05/01/2021
2013 Ram 1500
It was exactly what I ordered and it only took 2 days to get.1026665
To determine what kind of transmission cooler you will need depends on how much weight you will be towing and where you will be towing. Also, you will want to check how much room you have in front of the radiator to be able to install the transmission cooler.
If you will be towing a light load, less than 2000lbs, in flat driving conditions, your 1998 Chevrolet Silverado 4x4 5.7L will do fine with a class I rated cooler. If you will be towing more than a 2000lb load through some hills,... view full answer...
Installing a transmission cooler is not very difficult and I have every confidence that you will be able to install the Derale Transmission Cooler, # D13611, on your 2007 Chrysler Town and Country. Make sure you have the necessary tools. Your mechanical skills should serve you well for this installation.
I can give you some installation tips. Transmission coolers are designed to be mounted flush against either the radiator or the AC condenser core. For maximum cooling ability, the heat... view full answer...
There will be a built in transmission filter on your 2014 Honda Accord. Changing the transmission fluid that often really wouldn't be necessary.
If you can find external transmission lines on your 2014 Honda Accord you can install a transmission cooler. For a vehicle like yours that won't be towing anything ever most likely you wouldn't really need one. But they can't hurt. The part # D13611 is a pretty small cooler that would work as long as you find external lines on your transmission.... view full answer...
The Derale Series 9000 Plate-Fin Cooler # D13611 would be an excellent choice for use on your 2011 Nissan Maxima. Transmission coolers are not vehicle specific, but there are coolers that are recommended based on available mounting locations of your vehicle.
It is always recommended to use the most efficient mounting location that is possible. Typically this is located between the AC condenser core and the grille. If the ideal and most efficient mounting location is not possible, then... view full answer...
I do not see any reason why you would not be able to tow a 1,255 pound boat and trailer with a 2008 Ford Taurus. You should check your vehicle owner manual and make sure that the gross trailer weight and the tongue weight of the boat, loaded and ready to tow, are within the vehicle limits.
We have the Draw-Tite Max-Frame, # 75299, which has a 3,500 pound weight carrying capacity and would be plenty of hitch to tow the boat you mentioned, as long as the vehicle ratings are high enough.
You... view full answer...
On a transmission cooler there are three basic types of heat exchangers. The most efficient is the stacked plate. The next one is the plate and fin, which is very efficient. Then, the tube and fin which is moderately efficient.
It will also matter where the heat exchanger is installed. The best spot for the greatest efficiency is between your vehicles grille and the AC condenser core on your 2007 Jeep Liberty. The next best spot is between the AC condenser and the radiator. This spot will... view full answer...
The transmission temperature on your 2004 Toyota Camry should run through the computer and be accessible through the OBD-II port using the Edge Insight, # EP84130. The parameters that you could potentially monitor include:
Battery Voltage
Intake Air Temperature (IAT)
Engine Oil Pressure (EOP)
Engine Coolant Temperature (ECT)
Engine Oil Temperature (EOT)
Transmission Fluid Temperature (TFT)
Miles Per Hour (MPH)
Miles Per Gallon (MPG)
Revolutions Per Minute (RPM)
1/4-mile and 0 - 60 times
If... view full answer...
Mounting a trans cooler in front of everything else, radiator and AC condenser, will yield the most cooling ability. The size of the heat exchanger is the factor that weighs most heavily on the cooling ability followed by location and construction/design.
The best way to select a cooler is by considering the load you will be towing and the area you will be towing in. The cooler needed to aid in towing a single jet ski in a cool or moderate climate would not be nearly as big as the cooler... view full answer...
Any of the transmission coolers we sell are designed more as a supplemental cooler that is meant to augment the factory transmission cooler portion of the radiator, not replace it entirely.
If you are having the common problem with the radiator leaking causing the engine coolant contaminating the transmission fluid, your best bet would be to have the original radiator replaced. Nissan has extended the factory warranties on radiators on 2005-2010 Frontier, Pathfinder and Xterra models.... view full answer...
With transmission coolers "size does matter..."
Basically the bigger the cooler you can fit in front of the radiator the better it's going to cool your fluid. Between the two you mentioned the part # D13503 would be the best option. It's size is 11" Wide x 8-3/4" tall x 7/8" deep.
For your size vehicle this is the perfect size and would do a great job. view full answer...
For your 2006 Mitsubishi Raider, the Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient # D13611 is a small but strong transmission cooler. It requires no extra fittings for installation.
For a better transmission cooler, I recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13503. This cooler is designed for Mitsubishi Raiders with late-model, electronic overdrive transmissions. This... view full answer...
For your 2004 Chevrolet Avalanche with 5.3L V8 engine the most popular supplementary transmission cooler is the Derale part # D13503 which will install using Snap-In Radiator Adapter Fitting # D13035.
This cooler is a Class III type, meaning it offers substantial supplementary cooling of your transmission fluid after it gets its first temperature reduction inside your radiator. This 11 x 8-3/4 x 7/8-inch cooler will take in the transmission fluid after the initial cooling and drop its... view full answer...
I have not heard of that being done but it absolutely could work. What I would instead recommend is keeping your current transmission cooler and adding the Derale Electra-Cool Combo Engine and Transmission Cooler Assembly w/ Fan, -8 AN Inlets - 8 Pass # D15200 to use as an additional transmission cooler and a power steering cooler. This kit comes with the barb fittings to make the installation easy.
You may also be interested in the Derale Single-Hose Transmission Cooler Installation... view full answer...
The item you selected, the Derale Transmission Cooler, part # D13611 will work on your 1997 Mercury Grand Marquis as long as you have room to mount it on your vehicle. The ideal place to mount a transmission cooler for maximum cooling efficiency is behind the grill of your 1997 Mercury Grand Marquis but in front of the radiator.
Part # D13611 is a plate and fin cooler and is very effective in cooling the transmission fluid.
You will want to measure at the front of your vehicle to make... view full answer...
It would not surprise me if Mitsubushi OEM transmissions had a function that stopped the flow of transmission fluid out of the transmission when the transmission is cold. I do not believe that this option would be installed outside of the transmission, because there would need to be a bypass hose and valves in the transmission output and return lines, causing a complicated installation at the factory.
The Derale Series 9000 Plate-Fin Transmission Cooler Kit, item # D13611, does not have... view full answer...
Transmission coolers are not vehicle specific, however to optimize efficiency you would want to use the largest transmission cooler available, and mount in the optimal place on your vehicle. The most efficient mounting position is considered to be between the grille and the AC condenser core.
Considering the space that is available for you to mount a transmission cooler is most likely limited on your 2006 Pontiac Vibe I recommend either the Derale 9000 Plate and Fin Transmission Cooler... view full answer...
The factory transmission cooler is likely inside of the radiator on your 2006 Nissan Xterra so the only way to replace it would be to replace the radiator. You can probably find an aftermarket one for less money than an OEM replacement from Nissan. I can tell you that what they want to charge, assuming that includes parts AND labor, is not a bad price for that type of repair.
Bypassing the factory cooler would be the best option if you don't want to replace the radiator. If you do that... view full answer...
The Derale Series 9000 Plate-Fin Transmission Cooler, part # D13611, will fit your 2005 Honda CR-V. It is a Class I transmission cooler which means it is designed to be used when towing up to 2,000 lbs. It will work when towing your 1,800 lb. camping trailer. It measures 11 inches wide x 3-7/8 inches tall x 1-1/4 inches deep.
I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler, part # D13502. This is a Class II transmission cooler which is rated for towing up to 3,500... view full answer...
Yes, the Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets # D13612 does fit your 2009 Ford Escape and will work well. This has more cooling capacity than the # D13611 so it would be a better option! view full answer...
Sealed transmissions make installing a transmission cooler a bit more interesting since there isn't an easy way to add or check fluid.
There may not be a dipstick on your transmission, but there is drain and fill plug. You are going to have to use a lube pump to get the proper amount of fluid in the vehicle so honestly your best option is going to be to have a transmission shop do the install since they will have the equipment needed.
Prefilling the cooler might get you pretty close... view full answer...
Aftermarket transmission coolers are typically marketed as supplemental coolers, not replacement coolers. If you are looking to replace your OEM transmission cooler due to a leaky or damaged cooler, then you will want to install the largest transmission cooler that will fit in the space available. The ideal place to install this cooler would be in front of the AC condenser or radiator to allow for adequate air flow.
I would recommend looking at the Derale Series 9000 Plate-Fin Cooler,... view full answer...
Although the Derale # D13611 transmission cooler would work well with your Saturn Vue, we typically recommend using the largest cooler that will fit behind the grille of your vehicle. The ideal mounting location is directly behind the grill, in front of the radiator and A/C condenser. Because a transmission cooler allows airflow through it, there is not a worry that it will block or hinder the operation of the radiator or condenser behind it.
A larger cooler like part # D13502, which measures... view full answer...
I typically recommend choosing the largest transmission cooler that will fit into the available space. The best place to install a transmission cooler is directly behind the grille, in front of the radiator and A/C condenser.
Choosing the largest available cooler like part # D13503 is a good choice, because you cannot over-cool a transmission. The cooler measures 8 by 11 inches, and is 7/8 of an inch thick.
The cooler installs inline with the transmission return line that runs from the... view full answer...
The best transmission cooler that will fit and works best for your 2011 Ford Escape and 2010 Mercury Mariner is the Derale Series 9000 Plate-Fin Transmission Cooler Kit w/Barb Inlets, # D13611. This fan measures 11" wide x 3-7/8" tall x 1-1/4" deep to provide the correct fit on your vehicles. This cooler works the best because it features turbulator technology, whereby fluids are agitated continuously, not only to facilitate heat transfer, but also to prevent any undesirable drop in pressure. view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lopez
7/30/2015
Its excellent inproved the performance of my truck 100 I am a very satisfy customer.