bing tracking image
  1. Trailer Tires and Wheels
  2. Kenda
  3. 13 Inch
  4. Tire with Wheel
  5. 4 on 4 Inch
  6. 175/80-13
Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C

Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C

Retail:$128.15
Our Price: $108.73
You Save: $19.42
Trailer Tires and Wheels
Shipping Weight: 28 lbs
Add to cart
AM3S130 - Steel Wheels - Galvanized,Boat Trailer Wheels Kenda Tire with Wheel
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Bias tire has a ply rating of 6 and a 1,360-lb maximum load at 50 psi. The 13" diameter x 4-1/2" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant galvanized finish. Great Prices for the best trailer tires and wheels from Kenda. Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C part number AM3S130 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (6424)
  • Q & A (0)
  • Photos

Kenda Trailer Tires and Wheels

  • 13 Inch
  • Tire with Wheel
  • 4 on 4 Inch
  • 175/80-13
  • Steel Wheels - Galvanized
  • Boat Trailer Wheels
  • Load Range C
  • Bias Ply Tire
  • M - 81 mph
  • Kenda

Bias tire has a ply rating of 6 and a 1,360-lb maximum load at 50 psi. The 13" diameter x 4-1/2" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant galvanized finish.


Features:

  • Loadstar special trailer tire outshines other bias tires
    • Flatter tread offers improved stability for excellent handling
    • Special trailer tire design
      • Couples the strength of a bias tire with the durability and stability of a radial tire
      • Created specifically for trailers and not intended for use on other vehicles
    • Advanced rubber compound
      • Longer tread wear
      • Low rolling resistance for smooth ride
  • Steel wheel has 8-spoke design
    • Galvanized to resist rust
  • Tire-and-wheel assembly meets Department of Transportation specifications


Specs:

  • Rim dimensions: 13" diameter x 4-1/2" wide
  • Bolt pattern: 4 on 4"
  • Wheel capacity: 1,660 lbs
  • Wheel bolt size: 1/2"-20
  • Offset: 0
  • Pilot diameter: 2.65"
  • Tire size: ST175/80D13
    • Section width: 6.6"
    • Outer diameter: 24"
  • Tire capacity:
    • Load range: C
    • Ply rating: 6
    • Maximum load: 1,360 lbs at 50 psi
  • Maximum speed: 81 mph (speed rating M)
  • Warranty:
    • 5-Year on tire
    • Limited 2-year on wheel


1-Year Worry-Free Guarantee

This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge.


Bias Tires vs. Radial Tires

Bias vs. radial tire graphic

Bias ply tires are designed for off-road or agricultural applications. They are built with thick, durable nylon cords that are positioned at a 30- to 45-degree angle to the direction of travel. The layers alternate in a crisscross pattern, making the sidewalls stiffer so that the entire tire is able to flex easily. As a result, the tire provides a smooth ride and improved handling when trailering on uneven surfaces.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Side

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"




3S130 8-Spoke 12" Galvanized Wheel and Loadstar K550 Bias Tire - LR C

Item # AM3S130





Customer Satisfaction Score:


Customer Reviews

Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C - AM3S130

Average Customer Rating:  4.8 out of 5 stars   (6423 Customer Reviews)

Bias tire has a ply rating of 6 and a 1,360-lb maximum load at 50 psi. The 13" diameter x 4-1/2" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant galvanized finish.

by:

I bought these wheels for my Harbor Freight trailer, 1 year ago. They have been fantastic!
I trailer a dirtbike(s) 150-300'lbs, and it rides so smooth in the back, I don't even know I have a trailer hooked to my car.
I did not trust the original tires for the speed I occasionally drive, they weren't 'safe' for me. The 13" Loadstars are massive in comparison, and give a Much better/smoother ride, and because they have a much higher speed rating, feel safe when going above the limit. I would buy again, 100%. Love them.



by:

Galvanized coating on wheel poorly applied. It has collected in “blobs” on the wheel. Surely this imbalances the wheel unnecessarily. Would not recommend.

Etrailer Expert

Katrina B.

5/11/2023

Well that doesnt look good! Unfortunately this is very common with these rims and the galvanizing process. These are dipped then drip dry. Let me get you over to our customer service department for them to assist you.



by:

Bought wheel and tire to use as spare, but it looks so good I'm thinking about ordering another and using an old wheel and tire for spare. Also kelley was super helpful taking my order and answering my questions.



by:

Changed the boat trailer into a flat bed trailer. The new tires and wheels makes it look very nice.



by:

e-trailer delivered on time in a couple days! Great service… and I would but thru them again!

Purchased trailer wheels/tires. Tires look fine (China origin). Galvanized rims look pretty bad with weld marks showing on in/out sides. Hoping the bead seal is good … will only know over time…

Etrailer Expert

Katrina D.

10/30/2023

Yeah, unfortunately, this is a very common issue with galvanized rims. When the steel or iron is dipped into zinc, it is then air dried. Which does not always come out looking the best.



by:

Glad I found you guys got exactly what I needed,was a little nervous about ordering on line but you tutorial on how to measure bolt distance made the difference

Joe G.

6/23/2023

I bought it as a spare,luckily I havent had to use it so it looks just like new



by:

Happy with new wheels and tires



by:

Thanks for your follow-up. Attached is a photo of the new wheels/tires mounted on my trailer. The 35+ year old girl hasn't looked that good in a long time. Can't wait to tow something and not have to pump air in the leaking rims before hitting the road. Thanks for the excellent product line and fast service.

Rick R.

6/24/2015

The Kenda tires are not working out as expected. One has developed a slow leak, with no obvious damage to the tire, such as nail or puncture. I havent had a chance to water tank test it to see if the problem is the valve, bead, wheel, or tire.Have you had any other similar problems reported with Kenda tires that would indicate where to focus?

Etrailer Expert

Rachael H.

6/24/2015

Thanks for the follow up Rick, we have not heard of any issues specific to these tires. I think the water tank test sounds like the best way to figure out where the slow leak is. Thanks for your feedback.


by:

The tires look awesome on his trailer.



by:

No problems with the order or the tires and rims. New deck, new paint, new lights and last but not least new rims and tires.



by:

When the tire alone sells for $90 elsewhere, it's a no brainier not to get a new wheel and tire combo for $112 with free shipping! Kenda tires have always held up very well for me.



by:

I ordered tire and wheels for my trailer. The wheels existing on the trailer were 4 bolt patter from a 1965 Ford Falcon. The tires and wheels were fine except the bolt pattern did not line up. I can not use these and was told by someone at Your company to measure the bolt pattern which I can do. I certainly don’t need 4 tires, the tires are fine. It’s the wheels that don’t fit. I should not have to send measurements if your company had sent wheel for the specific car I mentioned. I know these to be correct because I took them off that car that had been in the family since new.

I did measure as well as I could centerline to center line and measured 3 and 1/4 inches. I don’t think that’s the best way to order wheels because there are so many iteration close but just off a bit. But I’d like to have wheels that fit. Right now I have a nice set of wheels and tires from you which I can’t use.

Etrailer Expert

Sierra K.

9/30/2021

I have attached a help article with the easiest way to measure bolt pattern. I do want to point out that etrailer only sells trailer tires and wheels. These are not recommended for vehicles of any kind.



by:

Thank you. They are very nice and they look awesome. Thank you again.



by:

Excellent quality at an excellent price, showed up to the house in a timely manor, bolted on the trailer and back to work!



by:

I live in a fairly rural community in IL. I have a little 4'×8' trailer I could not find tires for anywhere. Even my tire hoarding contacts didn't have any. The obsolete tire was a 155 R13 78S. I went to 4 local stores and only 1 had a 13 inch tire and only 1 in stock. Because there would have been a size difference I was going to need 2 tires. The price without tax was 79.00 for each tire. They had one 13 inch tire on a rim in stock, however it was a 5 bolt and I needed a 4 bolt. My store couldn't even order them. So I turned to the internet and found etrailer. I found these AM3S130 tires on rims with a 4 bolt pattern. I was hoping they'd fit under my fenders, but they were my only option I found in my hunt. I figured if they were too tall I'd just have the fenders removed and welded back on at a higher height. I was ecstatic to see free shipping for my order over $100. Shipping was fast and the tires were perfect fit! I'm ready to mow yards and hit the auctions again. Well, if the State of IL ever opens up again. Thank you etrailer!



by:

Prompt delivery. Excellent tire and rim. Making a BBQ trailer and it looks good.



by:

Does just fine as a trailer tire

David

2/26/2023

Holding up fine



by:

I'm very pleased with my rims & tires purchase. I received them quicker than expected. I would definitely purchase more items from etrailer.



by:

The rims seem very rough. Time will tell how the tires and rims hold up.



by:

I purchased these tires for my boat trailer. I trailer my boat approx. 1200 miles to Canada to go fishing. The shipping was quick, communications were good and the product was as described. They were easy to order using the instructions and diagrams provided on their website for the bolt pattern. They fit perfectly and I will order from etrailer again.



by:

great tires for home made trailer and f enders...

John

10/16/2022

Not good.oil buddy bearing kits [4]. Leak keep having to add oil every trip.



by:

one employee ordered this thinking it was needed.
It has not yet been used. still sitting in our storage container.



by:

Came sooner than expected and top quali ty



by:

Product as described, hard to find 4 on 4 pattern. EVen though listed as out of stock, product arrived well ahead of schedule. Etrailer customer service kept me notified throughout, no surprises except for early delivery. Good job.



by:

Love the price and fast shipping


25
3640
Show More Reviews

See what our Experts say about this Kenda Trailer Tires and Wheels

  • Can Trailer Tire Size 155R12 Be Upgraded to ST175/80D13
    If you go up to the taller tire size of ST175/80-13 like with the # AM3S130 you'll lose about 1.5 inches of fender clearance which may not be an issue but you'll want to make sure you have at least 3 inches when it's all said and done. It looks like you'd be fine but you'd want to verify this to be sure.
    view full answer...
    Image 1 for
  • Tire / Wheel Recommendation For Pop-Up Camper With 4 On 4 Bolt Pattern
    We do offer a few options for tire/wheel combos that may work for your camper. We have the Loadstar ST175/80D13 Bias Trailer Tire, part # AM3S120 that has a white 8-spoke steel wheel. This tire has a 6 ply rating and a 1,360 maximum load at 50 psi. For a tire wheel with the same characteristics except the wheel has a galvanized finish, you would order part # AM3S130. I have attached product review videos for both of these combos you can check out.
    view full answer...
  • Replacement Wheel and Tire for Size ST165/80D13
    The closest wheel and tire combo to what you have would be the ST175/80D13 part # AM3S130 which comes with a galvanized wheel. Or for just a wheel by itself the part # AM20222DX would work great as well.
    view full answer...
  • Replacing B78-13ST Trailer Tires on a 1991 Coleman Pop Up Camper
    The modern equivalent to a B78-13ST is going to be a 175/80-13 trailer tire. The tires and wheels that we have in this size come in 2 different bolt patterns, 4 on 4 or 5 on 4-1/2. For a 4 on 4, in a galvanized wheel like the one you have referenced, we have # AM3S130. This is a load range C tire with 1,360 pound capacity at 50 psi. For a 5 on 4-1/2, we have # AM31242, that you have referenced. This is a load range D rated for 1,660 pounds at 65 psi. If you just want the tires and not...
    view full answer...
  • Factors to Consider When Increasing Wheels on a Trailer from 8 Inches to 13 Inches
    The factors that you will want to consider when increasing your tire size are wheel bolt pattern, tire width, tire clearance and overall trailer height. You will want to keep the same bolt pattern as your current tires. The Kenda Loadstar ST175/80D13 Tire, # AM3S130, that you referenced has the same 4 on 4 bolt pattern as your current tires so that will work. The next thing to check is your tire width, or section width. Increasing the wheel size may increase the section width of the...
    view full answer...
  • Recommended 13 Inch Tire and Galvanized Wheel With 4 on 4" Bolt Pattern for Boat Trailer
    We have a couple of different options for you to increase your tire size and load capacity, although there is not a 14 inch wheel with a 4 on 4" bolt pattern as those size wheels are at least 5 lugs. What you can do is move up to 13 inch wheels and tires, and you have a couple of different options. The one I recommend is the Steel Spoke Trailer Wheel - Galvanized # AM20224 with the Kenda Karrier ST185/80R13 Radial Trailer Tire # AM10208. The reason this is the best option is because this...
    view full answer...
  • Can 4.80-12" Trailer Tires Be Used On a Boat Trailer With ST175/80D13 Tires
    You will need to ensure that you will not have any ground clearance issues with your ShoreLand'r trailer before moving to the smaller tires. Your current Loadstar ST175/80D13 Bias Trailer Tire # AM3S130 is going to be 24" tall and 6.6" wide. The Kenda 4.80-12 Bias Trailer Tire # AM30630 that you would be switching to is 20.7" tall and and 4.9" wide. Your trailer will drop 1.65" from the smaller tires. You will also need to ensure you have enough weight capacity with the Kenda 4.80-12...
    view full answer...
  • Can Larger Tires with Brakes Be Installed On a Harbor Freight Folding Trailer
    I do have an option for you to upgrade to larger wheels/tires in the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel part # AM3S130 which is similar to the Loadstar ST185/80D13 Bias Trailer Tire with 13" Galvanized Wheel part # AM3S334 you were asking for. However, the Harbor Freight Trailers use very uncommon bearings and we don't have any hubs that will work with them so I can't get you setup with brakes and the larger bolt pattern. There could also be an issue with the...
    view full answer...
    Image 1 for
  • Can 4.80-12 Trailer Tires and Wheels be Replaced by 175/80-13 Tires and Wheels
    The radial tires at size 175/80-13, are going to be 7 inches wide; too wide to be able to fit without incident on your trailer, so you will need to go with a bias ply tire. The wheels that we carry, unless otherwise noted, have a zero offset. This means that the extra width will be split evenly on each side of the tire. However, there will be very little room if you just have 1-3/4 inches of clearance. Make sure you double and triple check the measurements before ordering. As you are aware,...
    view full answer...
  • Trailer Tire and Wheel With 4 on 4 Bolt Pattern
    The largest tire and wheel combination you can get with a 4 on 4" bolt pattern is going to have a 13" rim and 175/80-13 tire. This will give you a tire and wheel that is a total of 24" in diameter and 6.6" wide, which will be 7.9" larger in diameter and 2" wider than your current set up. Depending on the capacity you need, your options for this are the Loadstar # AM3S040, which has a 1,100 lb capacity at at 35 psi or the Loadstar # AM3S130 which has a 1,360 lb capacity at 50 psi.
    view full answer...
    Image 1 for
  • Loadstar ST175/80D13 Bias Trailer Tire with 13 Galvanized Wheel with a 4 on 4 Lug Pattern
    Yes, we do sell 4 x 4 1/2 " wide wheels with tires. The Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C item # AM3S130 has a 4" x 4" bolt pattern and the width of the rim is 4 1/2" from bead seat to bead seat. When you add the tire, the width is 6.6 inches total.
    view full answer...
  • Size Difference Between 4.80-12 Tires and 175/80-13 Tires
    A 4.80-12 trailer tire and wheel such as the Kenda # AM30630, when inflated will measure 20.7 inches in diameter and have a width of 4.9 inches. A 175/80-13 trailer tire and wheel will measure 24 inches in diameter and have a width of 6.6 inches so you do need to measure to ensure you have the necessary clearance. A great option for a 175/80-13 trailer tire and wheel with a 4 on 4" bolt pattern is the Loadstar # AM3S130 which has a galvanized wheel or the Loadstar # AM3S120 which has...
    view full answer...
  • Determining If 4.80/4.00-8 Tire and Wheel Can Be Replaced With 175/80D13 Tire and Wheel
    I would be happy to help! A 4.80/4.00-8 tire like the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B # AM30000 measures 16.1" tall and 4.6" wide. The Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C # AM3S130 you were looking at measures 24" tall and 6.6" wide so it is not likely that this will be an exact replacement. With your current wheel and tire installed on your trailer you will need to measure from the top...
    view full answer...
  • Which Trailer Tires Will Replace 650-13 Tires On an Old Boat Trailer
    The 650 indicates the section width of the tire is at or near 6-1/2 inches. The closest modern equivalent is an ST175/80-13 which is about 7 inches wide. This tire size fits 4-1/2 to 5-1/2 inch wheels. Wheel width is measured on the inside where the tire sits not the overall width of the wheel. If you just want tires you can use # AM10210 rated for 1,610 pounds at 65 psi. If you want to also replace the wheels I recommend tire and wheel combo # AM3S130 which comes with a galvanized wheel...
    view full answer...
  • Recommended Boat Wheel and Tire with 4 on 4 Bolt Pattern
    The Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C # AM3S130 you were looking at are a great choice for a boat trailer because of the galvanized wheel and durable bias ply tire. These Load Range C tires have a capacity of 1,360-lbs, so you'll want to make sure that your boat and trailer don't weigh more than 2700-lbs. If you have a heavier trailer than that, just let me know what the estimated weight is and I can make an alternate recommendation.
    view full answer...
  • What is the Finish on Kenda Loadstar ST175/80D13 Tire with 13-Inch Galvanized Wheel # AM3S130
    The tire/wheel you referenced, Kenda Loadstar ST175/80D13 Tire with 13-Inch Galvanized Wheel, part # AM3S130, has a galvanized finish. This wheel is dipped in a 860-degree solution of molten zinc to provide a degree of corrosion resistance. This zinc coating reacts with oxygen and carbon dioxide to form zinc carbonate. This is the usually dull grey surface material you have seen on galvanized buckets. Dexstar does offer a silver-color powder coat finish on some of their rims, such as on...
    view full answer...
  • Recommend Replacement Spare Tire and Galvanized Wheel For Karavan Trailer Tire ST 175/80D13
    If you have a 5 on 4-1/2 inch bolt pattern you would want a Karrier ST175/80D13 Tire and Wheel part # AM31242, if you have a 4 on 4 inch bolt pattern you would want a Loadstar ST175/80D13 Bias Trailer Tire with 13 inch Galvanized Wheel part # AM3S130.
    view full answer...
  • 13 Inch Boat Trailer Wheel and Tires With 4-Bolt Pattern
    Sure, you can go from 12 inch to 13 inch wheels and tires on your boat trailer that has 4-bolt hubs. You just want to be sure to maintain 3" of clearance from the top of the tire to your fender and at least 1" of clearance between the inside of the tire and your trailer's frame rail. If you have that you can choose from the following wheels and tires for your boat trailer, depending on the load capacity you need, and they measure 24" in diameter and 6.6" wide. - Load Range B (1,100 lbs...
    view full answer...
  • Can I Upgrade the 4.80-12 Wheels and Tires on a Northern Tool Ironton Trailer
    I'll start out by saying that we don't have specific specs on a Northern Tool Ironton trailer but I was able to locate a photo and because of the fenders, I don't believe you'll be able to go up to a larger wheel and tire; your current 4.80-12 tire is roughly 20.63" in diameter. The smallest available 13 inch tire is an ST175/80-13 like the one that comes on the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C # AM3S130, which is 24" tall. You typically...
    view full answer...
  • How To Measure Correct Wheel Lug Pattern On A 4.8/400-8 Wheel
    The wheel you have right now is 4 on 4 bolt pattern with an outer diameter of the tire at 16.1" and a width of 4.7". Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C Item # AM30050 If you wanted to go up to a 13" 4 on 4 rim with a 175/80-13 tire the outer diameter of the tire would go up to 24.1" and the width would be 6.6. Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C Item # AM3S130. Which is a significant...
    view full answer...
  • Is a Trailer Tire's Load Rating Per Tire or Per Axle
    Weight capacity ratings on tires are for that 1 tire. So if you used 2 of # AM3S130 for example the total capacity would be 2,720 pounds total.
    view full answer...
  • Upgrading From 4.80-12 to Larger Tire on Utility Trailer
    Since you were looking at a 13" tire # AM3S130 I'm assuming you want to upgrade your 4.80-12 to a 13" and not a 23" tire. This is certainly possible as long as you have enough clearance. You probably have a bias ply 4.80-12 like the # AM10062 right now. This has an outer diameter of 20.5" and a section width of 4.8". Compare this to the Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel # AM31994 which has a section width of 7" and outer diameter of 24.1". At a minimum,...
    view full answer...
  • Recommended 13 Inch Tire and Wheel with 4 on 4 Inch Bolt Pattern
    The bolt pattern of all of our wheels with 4 lugs are 4-on-4 inches meaning the holes are 4 inches on center apart. It sounds like that is what you have but you say the Loadstar ST175/80D13 # AM3S130 has a bolt pattern too small. Do you mean the wheel width? The wheel width on that one is 4-1/2 inches from bead seat to bead seat. When you add the tire, the width is 6.6 inches total. If this is the issue, we have some wheels that have a 5 inch width like # AM22322HWTB but all of the...
    view full answer...


< Previous
12



Do you have a question about this Trailer Tires and Wheel?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Updated by:
Laura H
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.