6-1/2" x 2-1/16" Oval. Waterproof, LED trailer light serves as a clearance or side marker light when properly mounted. Surface mount to trailer. 2-Wire design with 0.180 male bullets. P2 Rated. Red LEDs
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're talking a look at the Optronics Millennium Series LED red clearance or side marker light. This light adds or replaces a clearance or side marker light on your trailer. It features a completely sealed waterproof design.It is a two wire design with the 0.180 male bullet connectors. One for power. One for ground. If you don't wanna use those, you can actually cut those off and strip back the wiring for hard wire applications.This is a LED system.
LEDs make great replacements for incandescent lights. They last longer, burn brighter, and they're much more efficient.With LEDs, you don't have to worry about replacing a bulb or worry about brittle filaments.Features a nice clear lens with red LEDs and a white mounting base. It is a surface mount installation, mounting hardware not included, but you can see the two pre-drilled mount holes.And it does require a 3/4 inch diameter hole for this area right here to sit it for flush mounting.If you want to add a finished look to the unit, you can add a bezel. We offer a chrome mounting bezel availiable and sold separately for part number 00212317B.This is a P2 rated light. It's Department of Transportation compliant.
Take a look at some measurements real quick and then we'll hook it up to power.Overall length, edge to edge, is about six and a half inches. Top to bottom about two and one sixteenth. Overall depth from back here, the flat portion, to the front of the lens, about three quarters of an inch deep, and the mount holes on the unit are separated on center, by about four and five eights inches.We're gonna go and hook it up to power. That way you can see what it looks like with some power running to it. Then we'll also be able to turn off our overhead lights so you can see it in a lower light setting.So you can see here it sends out a bright consistent signal.
We're looking at a four LED design or 4 diode design. So the multi-diode design really helps optimize the overall light output.The power drawn, 12.8 volts. 0.12 amps. And Optronics puts a lifetime warranty on the LEDs.That's gonna do it for today's look at the Optronics Millennium Series LED red clearance or side marker light.
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
6-1/2" x 2-1/16" Oval. Waterproof, LED trailer light serves as a clearance or side marker light when properly mounted. Surface mount to trailer. 2-Wire design with 0.180 male bullets. P2 Rated. Red LEDsGreat product! Just as described and etrailer product specialist are very informative!
The side marker lights look very good. They are high quality and well built.
etrailer has been a wonderful resource for me. They generally include videos of the products
installed, which makes things easier to understand
This is an excellent product. Top quality!
So much better than lights you buy at your neighborhood auto supply.
Lights up bright with the LED bulbs.
A little higher price than your normal lights but it is well worth the difference.
Highly recommend!
I was wanting the exact light and connector so it would be a easy replacement and it was just what I was looking for Thanks etrailer
Great Service, Good pricing and Quick Delivery. Thanks for locating the proper part for this older Titanium trailer.
Good looking and working product. Chrome cover is plastic but should hold up well.
I had a good experience with these guys. Price was right and ship time was proper.i do t have anything bad to say.
Good cuality
Excellent service
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.