6-1/2" x 2-1/16" Oval. Waterproof, LED trailer light serves as a clearance or side marker light when properly mounted. Surface mount to trailer. 2-Wire design with 0.180 male bullets. P2 Rated. Amber LEDs
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics Millenium Series LED Amber Clearance or Side Marker Light.This light adds or replaces a clearance or side marker light on your trailer. It features a completely sealed waterproof design, and it's a two wire design, so you have one wire for power and one wire for ground. These do have the .180 male bullet connectors on them, so you can actually, if you don't want to use these, you can cut these off, strip back the wiring for hard-wired applications.This is a LED system. LEDs make great replacements for incandescent lights. They last longer and burn brighter and they're much more efficient. You don't have to worry about replacing bulbs or worry about brittle filaments with an LED system.It has a nice clear lens with a white mounting base, and then the LEDs are amber in color.
It's a surface mount installation, hardware not included, but you can see your two pre-drilled mount holes, and then it does require a 3/4" diameter hole for this are right here for flush mounting. If you want to add a finished look to the light, you can add a bezel. We offer a chrome mounting bezel, available and sold separately with part number 00212317B. This is a P2 rated light. It's Department of Transportation compliant.A few measurements to go over with you real quick, and then we'll hook it up to power so you can see what it looks like with power running to it.
Overall length measurement is about 6-1/2". Top to bottom is about 2-1/16, and then the mount holes on the unit are separated on center by about 4-5/8", and the overall depth from the back of the housing, the flat piece right here, to the front of the lens is about 3/4" deep.We're going to go and hook it up to power. That way you can see what it looks like with some power running to it. You can see here it sends out a nice, consistent signal. We're looking at four LEDs on this unit, so the multi diode design really helps optimize the light output.
Power draw at 12.8 volts is 0.12 amps, and Optronics puts a lifetime warranty on the LEDs.That's going to do it for today's look at the Optronics Millenium Series LED Amber Clearance or Side Marker Light.
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
6-1/2" x 2-1/16" Oval. Waterproof, LED trailer light serves as a clearance or side marker light when properly mounted. Surface mount to trailer. 2-Wire design with 0.180 male bullets. P2 Rated. Amber LEDsGreat product! Just as described and etrailer product specialist are very informative!
The side marker lights look very good. They are high quality and well built.
etrailer has been a wonderful resource for me. They generally include videos of the products
installed, which makes things easier to understand
This is an excellent product. Top quality!
So much better than lights you buy at your neighborhood auto supply.
Lights up bright with the LED bulbs.
A little higher price than your normal lights but it is well worth the difference.
Highly recommend!
I was wanting the exact light and connector so it would be a easy replacement and it was just what I was looking for Thanks etrailer
Great Service, Good pricing and Quick Delivery. Thanks for locating the proper part for this older Titanium trailer.
Good looking and working product. Chrome cover is plastic but should hold up well.
I had a good experience with these guys. Price was right and ship time was proper.i do t have anything bad to say.
Good cuality
Excellent service
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.