Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(257 reviews)
Price: $257.24
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C99FR
Retail:$395.95
Our Price: $257.24
You Save: $138.71
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (257)
- Q & A (0)
- Photos
CURT Trailer Hitch - C99FR
- 2 Inch Hitch
- Class III
- 5000 lbs GTW
- CURT
- 500 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum tongue weight: 500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13453 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2020 - 2020 Toyota Highlander
- 2021 - 2024 Toyota Highlander excluding XSE
- 2021 - 2024 Toyota Highlander XSE models
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C99FR
Average Customer Rating: 4.9 out of 5 stars (257 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: ScottD07/07/2023
2023 Toyota Highlander
CURT, TOYOTA, and etrailer.....This is a proper combination of quality, engineering and customer service. Having personally installed at least five CURT hitches, I can confirm the quality, fit and value. Toyota trucks and S.U.V.'s are engineered to make good use of these hitches. etrailer has the best website and customer service. Their prices are very competitive and customer support is excellent from selection tom shipping to follow up support.
I installed this hitch by myself, took my time(at the preferred pace for a 77year old curmudgeon) and everything went smooth.
The support videos from etrailer are very helpful and the downloads from Toyota help a great deal.
I chose OEM wiring harness and backed away from the OEM hitch from Toyota.
The CURT hitch was chosen for quality, price and clearance for the spare tire. My 2023 Highlander XLE was very easy to work on due to the way Toyota sets this vehicle up for towing.
Thanks to etrailer for their great work on enabling the customer to get things done in a proper manner.
by: Travis05/04/2023
2023 Toyota Highlander
I watched the installation video a few times prior to installing. Instructions were fine with one exception. I have a 2023 XSE with a factory dial tipped exhaust. I had to disconnect the exhaust hanger in order to get enough clearance for the hitch. Everything else worked great and I like the low profile.
by: Richard02/22/2024
The hitch receiver is well made and heavy duty. Took about an hour and a half to install. Cutting the cover panels was a little tricky but the hitch receiver fit perfectly. Installing was a 2 man job.
by: Fish06/28/2023
2023 Toyota Highlander
Was skeptical as I wasn't 100 percent sure it would fit on my 2023 Platinum Highlander as the rep said it would but sure enough, he knew what he was talking about! Great customer service, super fast shipping. Package came 1 day earlier than ETA.
Perfect fit! The point only stands out about 1 inch from the rear bumper which was a + for me as I was afraid of it sticking out too much. Took about 1 hour to install (a lot quicker if you have the proper tools/torque wrench 85lbs per manufacturer). The video was spot on so follow the video instructions).
I would have gave this 5 stars but being critical, there were 2 paint chips on the finishing making me think this was either scraped at the manufacturer before packaging and shipping. I know this because the square was wrapped in plastic wrap and had 0 damage to the box where that end was pointing.
I would highly recommend this to anyone looking for a tow hitch for their 2023 Highlander.
by: Eugene 04/25/2024
2023 Toyota Highlander
Still works great. Only minor annoyance is that the inner portion of the reciever had it's protective paint/coating worn off from a very bobby uhaul trailer rental and is showing signs of surface rust. An hour with a wirebrush and some rustoleum would do the trick, but something to note. Otherwise it's had 4,000 pounds on it and no issues.
by: Rhonda Sargent07/07/2023
This is the second hitch Curt Hitch we've purchased and installed on one of our Highlanders. It's simple to install and didn't take very long to do so. The best part is that it doesn't interfere with you don't lose the hands free ability to open the rear hatch.
by: Vincent11/07/2023
However, I would rate etrailer as 5 stars. Hope you can use this information on your database.
I did business several times with your company and every time I was satisfied with.
I had a problem with one of the parts I received in a previous acquisition, and etrailer replaced it seamless and quickly. So I continue ordering.
Price is on the high side, but considering my previous experience with etrailer I am ordering from your company.
I also appreciate quick responses to my questions.
This time products were received OK and have been already installed successfully.
One question:
The wiring is instaled but is loosen underneath the vehicle. That does not match the visual quality of the hitch or the vehicle itself.
Do etrailer has a box or something to hold this wiring under the vehicle while not in use ? ...Or have any suggestion for that ?
Brooke M.
11/14/2023
It sounds like what you are needing is somewhere to sort of store the wiring when you arent towing. If that is correct then part # 18144 would do that for you.
by: BK02/01/2024
It arrived in great shape. I won't say it was the easiest project I have undertaken but it fit perfectly. The video and the instructions helped plus I watched some other videos on YouTube that gave some additional recommendations. Additionally, Gwen was very helpful in assisting me with my order.
by: Domingo 03/25/2024
Jamie and Stacy are professionals, help me a lot on my questions! I stalled trailer hitch and harness with out difficulties! I’ll buy again in your company!!!!
by: Edward03/03/2024
Toyota Highlander
Works great on my Toyota Highlander. Easy install too. Only negative, the hitch does block the kick sensor for the rear hatch.
by: George 04/17/2024
Trailer hitch was delivered quickly and I installed it as directed with no problems.
by: Dwight 03/06/2024
Toyota Highlander
We mainly installed it on my wife's Highlander for the use of her getting pulled out of the ditch if needed. We didn't have to use so far she has not gotten stuck.
by: Emmons02/28/2024
I put the hitch on by myself in 90 minutes.
At 82 years old it was so easy. The electrical portion required a lot of help
by: Kent B11/01/2023
After researching several sites, I chose etrailer, Curt hitch receiver class 3. Both retailer & manufacturer have high ratings and the videos provided all the information needed. Was able to install on my garage floor, no lift of vehicle. Did all the prep before having my wife hold one side while I secured the other. Hard to imagine one person doing this step. Getting bolts in required a bit of persuasion but once in they tightened easily, torqued them, put the rest back together. My lift gate has the kick open feature, glad to see the hidden hitch allows it to still work. Definitely use the video that matches your hitch, very pleased!!
by: Randy 04/01/2024
Toyota Highlander
Easy to install and fit perfectly on a 2023 highlander hybrid.
by: Susan 04/04/2024
2021 Toyota Highlander
I had this professionally installed and it looks great on my Highlander!
by: Shayne11/07/2022
This hitch worked out great. pulled a 4x6 cargo trailer cross country with no issues. Purchased multiple items from etrailer....definitely will shop again.
by: Mo09/16/2023
I placed the order but delivery got delayed due to item being back-ordered. Alex J reached out from etrailer and informed me about the problem. He was very helpful and resourceful to find a similar item that would fit my car. After selecting the item the shipment was placed on the same day and delivery was done within 72 hrs.
I will update my review after unboxing and installing the hitch.
I will definitely recommend the etrailer. They have knowledgeable staff and great customer service.
Well done Alex J and thank you for your help
by: Claudio Rojas08/01/2022
2020 Toyota Highlander
This receiver did an amazing job! I bought it to protect my car while parked with the help of a bumper protector. But I got rear ended on the highway all the damage went to the bumper protector and the receiver was unhinged as if nothing had happened, saved my car from being totaled. I highly recommend it.
by: Robert 05/26/2024
Customer service was excellent. Product came fully shipped as ordered and in great shape. Shipping time was excellent, I wasn’t expecting the order to come for 6 days and it arrived in 3.
by: David04/21/2021
2006 Ford F-150
The hitch arrived ahead of schedule. Watched the video and did the install. Super simple. Didn't even have to jack up the car. My 15 y/o son helped me hold it up until I could get the bolts in. The "kick to open" still works and it looks great! Only the receiver shows. Honestly, installing the Toyota wiring converter behind the cupholders in the 3rd row was a bigger pain than the hitch install.
by: Saythong07/11/2020
2020 Toyota Highlander
Great price from etrailer!!! Item was dropped shipped from manufacturer CURT, packaging was horrible but NOT etrailer.com’s fault at all!!!
As for the trailer hitch it fit perfectly removed one bolt on passenger side and minor trimming of under panel on the drivers side. Installed in less then a hour!!
by: Richard10/05/2021
Curt 13453 or etrailer part C99FR will fit 2021 Highlander XSE and other model as well but not sure hybrid. I did installation by myself with help of moving dolly,6x6,and long strong zip ties. See pictures for more details. You do need cut out the black cover for re-installation due to tow hitch in the way or leave the black cover off.
by: Roger04/24/2020
2020 Toyota Highlander
Fits perfectly on 2020 Highlander Limited! Easy to install. Finished receiver height is 16”. The hitch is completely hidden behind the rear facia. For the wiring I used the Tekonsha 118252 that plugs directly into the new plug located under the bumper driver’s side. I used the Toyota PT725-48200 ($55) converter that plugs into the wiring located behind the side panel, second row seat, drivers side. Why on earth Toyota buried this connector there is beyond belief. When you add any hitch, including this one, the kick opener still works sometimes. Toyota advises you turn off the opener in vehicle settings. I never used the kick opener before as it was always sort of hit or miss gimmick. Pressing the button always worked faster anyway.
25
257
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Can Weight Distribution or Sway Control Be Used With 2021 Toyota Highlander With Curt Hitch C99FR?Friction sway control like the Curt # 17200 would be a very cost effective option to improve the towing experience if you are experiencing sway when towing your trailer with your 2021 Toyota Highlander that has the Curt Trailer Hitch Receiver # C99FR installed. However this hitch is not rated for weight distribution so you would not be able to go that route. To use the friction sway control with your Highlander you will need the Sway-Control Bracket # RP26003 which will bolt on to your...
view full answer... - Comparing Curt and etrailer Trailer Hitches for 2021 Toyota Highlander XSEThe reason the Curt Trailer Hitch Receiver # C99FR and etrailer Trailer Hitch Receiver # e75ZR look so similar is because they have the same design. Both have a concealed cross tube to help give a factory look. They also have the same capacity with a maximum gross trailer weight of 5,000 lbs and tongue weight of 500 lbs. The thing that sets these two hitches apart is the finish. The Curt hitch has a glossy finish and the etrailer hitch has a rugged, matte black finish. This gives the...
view full answer...
- Should the Spare Tire be Able to be Lowered for the 13453 2020 Toyota Highlander? It is common for the spare tire to rest on or slightly above the hitch like part # C99FR on your Highlander and many other models. When lowering the spare tire in this situation the portion closer to the front of the vehicle will lower down first then the rear then follows. When putting it back in you will guide the rear of the spare in it's position then continue to raise it fully to the underside of the vehicle.
view full answer... - Fit of Curt Class III C99FR Receiver Hitch on 2021 Toyota Highlander XSEThe Curt Class III, part # C99FR is a confirmed fit for your Highlander. The hitch will fit models with an 18" or smaller spare tire under vehicle; larger spare tires will not be able to be stored under the vehicle once the hitch is installed. If you're planning on towing with the hitch, you'll also need a trailer wiring harness like # TK99FR, a ball mount like # 2923 and a trailer ball like # 19261 for a 1-7/8 inch or # 63845 for a 2 inch ball. I've linked to an installation video for...
view full answer... - Is There a Trailer Hitch that Fits 2021 Toyota Highlander XSEThe Curt hitch part # C99FR fits all models of the 2021 Toyota Highlander so it would fit your XSE model. Then for trailer wiring the Curt connector part # C76CR would be a great and easy fit.
view full answer... - Trailer Hitch Recommendation for 2021 Toyota Highlander XSEFor the 2021 Toyota Highlander XSE model, I'd recommend the Curt Class III hitch, part # C99FR. The # C45CR hitch you'd looked at isn't a fit for the XSE model, according to Curt. The hitch is compatible with 18 inch or smaller spare tires, if your rim your spare tire is mounted on is larger than 18 inches, you won't be able to stow the spare tire under the vehicle. If you'll be towing with the hitch, you'll also need a wiring harness like # TK99FR, a ball mount like # C45030 with pin...
view full answer... - Does the Spare Tire on a 2022 Toyota Highlander Hybrid fit w/ the Curt Trailer Hitch Receiver I have attached a picture of the Curt Trailer Hitch Receiver item # C99FR installed on a 2022 Toyota Highlander XLE. This Highlander has the 235/65R/18 wheel and tires. You will be able to see what a tight fit the spare tire has between the hitch receiver and the muffler bracket. The Curt Trailer Hitch Receiver item # C99FR will fit on the 2022 Toyota Highlander Hybrid Platinum but you will not be able to mount the larger 235/55R/20 spare tire underneath your vehicle.
view full answer...
- Curt Trailer Hitch vs. etrailer Trailer Hitch on 2023 Toyota HighlanderThere is only one difference between the Curt and etrailer trailer hitches that fit your 2023 Toyota Highlander, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your '23 Highlander are the following part numbers: - etrailer Trailer Hitch Receiver # e75ZR - Curt Trailer Hitch Receiver # C99FR The matte black finish is nice as it hides the inevitable dings, scuffs and scratches...
view full answer... - Will Swagman XTC4 4-Bike Rack Fit A 2021 Toyota Highlander HybridThe Swagman XTC4 4-Bike Rack for 2" Hitches # S64665 you were looking at will fit in the receiver of your 2021 Toyota Highlander Hybrid just fine. Since trailer hitch receivers for your Highlander like the Curt # C99FR are nearly flush to the rear bumper, you will also have no problems folding the rack up. If you do not already have a trailer hitch receiver this would be my recommendation. The Swagman # S64665 can support four bikes weighing up to 35lbs each, with tires up to 2.5" wide,...
view full answer... - Which Trailer Hitch for 2021 Toyota Highlander XSE?The Curt # C99FR Class III hitch you mentioned would work great with your Highlander XSE. Keep in mind, if the vehicle is equipped with the What are you planning on using the hitch for? If you'll just use it for a hitch mounted accessory, all you need is the hitch. If you'll be using it for towing, you'll need a wiring harness, a ball mount and a trailer ball. For a wiring harness, what you'll use will depend on whether your vehicle is equipped with the factory tow package. If you DO have...
view full answer... - Is Curt Trailer Hitch C99FR For Toyota Highlander Compatible With Weight DistributionThe Curt Trailer Hitch Receiver # C99FR on your Toyota Highlander is not compatible with weight distribution, but you can still add sway control. What you can do is add friction sway control, and you'll also need a bracket: - Curt Friction Sway Control for Weight Distribution Systems # 17200 - Reese Sway-Control Bracket for 2" Ball Mounts # RP26003 The # 17200 says "for weight distribution systems" but can also be used without them. It will attach to your trailer frame on one side, and...
view full answer... - Trailer Hitch Fit for 2021 Toyota Highlander With 20 Inch Spare TireMost of the hitches available for your 2021 Highlander would prevent any spare tire larger than 18 inches from being stowed under the vehicle, but the exception would be the EcoHitch # EH35VR. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # TK99FR for a 4 pole connector or # TK57VR for a 7-way connector. For a ball mount, use # 2753 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. I've linked to install videos that you might find helpful.
view full answer... - What Hitch, Wiring, and Brake Controller do You Recommend for My 2022 Toyota Highlander Limited? For a great hitch for your 2022 Toyota Highlander Limited without a factory tow package, I recommend the Curt Hitch Receiver - 2" # C99FR. The Curt hitch is compatible with your Limited model and comes with all mounting hardware required for a bolt-on installation. As far as weight capacity, the hitch has a 500 pound maximum tongue weight and a 5,000 pound gross towing rating. In order to confirm whether your vehicle can accommodate this much weight, I recommend confirming your vehicle's...
view full answer... - Trailer Hitch Recommendation for 2023 Toyota Highlander HybridThe best hitch option for your 2023 Toyota Highlander hybrid would be the Curt part # C99FR as it offers all of the things you are looking for at the best price. The big advantage the EcoHitch part # EH35VR has it's additional tongue weight capacity but since that's not something that interests you it wouldn't be worth the extra money. The Curt works with your 18 inch spare as well.
view full answer... - Toyota Highlander XSE Hitch InstallationYou will not have to cut into any of the rear trim to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # C99FR. The only pieces of your 2021 Toyota Highlander you will have to alter is the under body panel. It requires a few cuts and some minor modifications to be reattached after the hitch receiver is installed. I have linked an installation video to show you.
view full answer... - What Trimming is Involved in the Installation of the # C99FR on My 2022 Toyota Highlander Hybrid?Yes, you will have to complete some minor trimming when installing the Curt Hitch # C99FR on your 2022 Toyota Highlander Hybrid. I went ahead and attached a diagram that shows the dimensions of the trimming you need to do (the shaded areas). The great thing about the Curt hitch is that it installs close to the rear bumper. The distance from the center of the hitch's pinhole to the outside face of your bumper is only 1-1/2 inches. This makes the Curt hitch a great choice if you want to...
view full answer...
- Best Trailer Hitch for a 2021 Toyota Highlander XSE The best trailer hitch for your 2021 Toyota Highlander XSE is going to be the etrailer Trailer Hitch item # e75ZR. This hitch is custom fit and bolts to your Highlander with included hardware. I have linked an installation video below. If your Highlander did not come with the factory towing package and you need a wiring harness. I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # TK99FR. This custom-fit T-One connector plugs into your vehicle's wiring...
view full answer... - What Is The Difference Between The Curt C99FR &The Curt 13453 Trailer Hitch? The Curt Trailer Hitch Receiver # C99FR and the product number 13453 that you're seeing is just Curt's part number for this hitch. The # C99FR number that we have on our website is just our part number for the hitch. We have to use different part number than the manufacturers since a lot of the manufacturers that we have, use the same or similar part numbers.
view full answer... - Mostly Hidden Trailer Hitch Recommendation for 2020 Toyota HighlanderThe Curt hitch part # C99FR is what I recommend for your 2020 Toyota Highlander as it has plenty of towing capacity, installs easily and is the only option that has a concealed crosstube which gives a more concealed look overall. I attached a picture of what it looks like installed as well.
view full answer...
- Will the Curt C99FR Fit a 2021 Toyota Highlander XSE We actually have a customer of ours that did successfully install the Curt # C99FR on their 2021 Toyota Highlander with the XSE package, so we do have it listed as fitting. With that being said, they did mention that the exhaust did need to be lowered a bit more than usual, but this does happen sometimes and actually isn't too far out of the ordinary. I included a couple pictures of this hitch installed on their XSE for you to check out as well. If you are going to be towing with your...
view full answer...
- E-Bike Rack Recommendation with Ramp for Class C MotorhomeHey Pam, the Yakima OnRamp bike rack part # Y36FR would be a really great option that covers everything you need. It's RV rated so it can be used in your Class C RV hitch as well as Honda CR-V, it's designed for e-bikes, and also has a ramp built into it as well.
view full answer... - Hitch Install for 2020 Toyota Highlander Hybrid Regarding Fascia TrimmingThis Curt # C99FR Hitch is verified to fit your 2020 Toyota Highlander. There is some minor trimming on a plastic under body panel located underneath the vehicle between the back bumper and the spare. It is a simple procedure that most of our customers do with tin snips. The trimming is the same for Hybrid and Non-Hybrid models. I have included a link to a video showing the entire installation. At the 11:40 mark you can see the panel and the trimming. All the parts needed to install...
view full answer... - Are There Parts that Get Removed When Installing Curt Hitch on 2020 Toyota HighlanderWhen installing the Curt trailer hitch part # C99FR on a vehicle like your 2020 Toyota Highlander there are a few things that get removed and returned back to the owner of the vehicle. Or in your case you might just set them aside. There's a fascia tab, some rubber plugs, and a tow loop. At the attached video at 8 minutes our installer removed a bracket that looks to hold on an inner body panel. It's not mentioned in the video but it was reattached at end of install.
view full answer... - Can Bike Rack be Used with 2" Curt Trailer Hitch for 2020 Toyota HighlanderThe Curt 2" Trailer Hitch Receiver # C99FR is a great option to use a bike rack with your 2020 Toyota Highlander! I'm attaching a photo showing a side shot of the receiver where you can see the pin hole that you'd use to secure your bike rack. If you don't already have a bike rack then I'm linking a list of the most popular bike racks we have to offer for a 2020 Highlander that you can check out. There are a few of them on this list that are trunk mount options so just be mindful of that.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Edited by:
Lindsey S
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Eric H
Written by:
Kristina F
Test Fit:
Ryan G
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rich S.
5/17/2023
Exactly what I needed to know. Just got a 2023 Highlander XSE and was looking for the right hitch.