bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 4000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13126
Retail:$291.95
Our Price: $184.09
You Save: $107.86
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13126 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (165)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13126

  • 2 Inch Hitch
  • Class III
  • 4000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 600 lbs TW
  • 5000 lbs WD GTW
  • 600 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 600 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13126 CURT Class 3 Trailer Hitch Receiver

Installation Details C13126 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13126

Average Customer Rating:  4.8 out of 5 stars   (165 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:
Infiniti QX60

I have an Infinity QX60. I had the hitch receiver professionally installed for $80 in Jax. FL. Perfect for our 2-bike rack from REI.



by:
2020 Infiniti QX60

This is a perfect hitch for my needs on my 2020 Infiniti QX60. I’m just using it to carry two bikes only not pulling anything with it. Installation was simple I did modify the metal hanger that the rear bumper facia connects to using the pushpin.
It’s a real clean installation, looks like it came from the factory. Very glad I bought this and installed it myself. The dealership wanted $450.00 for the hitch and installation, wasn’t going to happen.
etrailer thanks for all the videos on the installation on the QX60, they were extremely helpful. etrailer Rocks!

Bill S.

4/11/2021

The hitch I purchased and installed is still working out perfectly for using it for carrying my bike carrier.



by:
2016 Infiniti QX60

I purchased and installed the Curt class lll hitch and 4 pin wiring harness on my 2016 Infiniti QX60. Installation was easy and went smoothly, thanks to the Etrailer video’s. There were no surprises and I am extremely happy with the product, installation process and the exceptional customer service Etrailer provides. Ordering was easy, I received it literally the next day and customer service followed up to make sure I had everything I needed. Would highly recommend Etrailer.

Doug B.

7/30/2019

Great, no problems! I have recommended etrailer several times to family and friends considering purchasing a hitch.



by:

Shipping was immediate. Installation was just as easy as advertised. A 74 year old and a 75 year old got it done in less than an hour. The hitch will be used to pull my fishing boat, keeping he good times rolling.

Elton

3/2/2021

Performs perfectly. Pulling the boat, you don’t even know it’s back there. If you’re looking for me, try the lake.



by:
2015 Nissan Pathfinder

Excellent trailer hitch ,easy to install also suply Nut and Bolt plus ring .

My friend mechanical shop and he told me you really by towing very good staff ,where you got it ?

I said to him look the sticker at the bar ,oh he said ,you smart by this extra spend time but saving big buck .

Saving money cost less than $ xxx ,but if you buy the car with towing package extra probably $ 1000 so I suggest do the same what I did .
And also behind you car people stop or parking not to close you car ,protect bumper from scratch or damage .
Thank you to all of you and Merry Christmas 2016 and the Best New year come 2017 .



by:
Infiniti QX60

Very glad and happy I got this hitch. Looks great and easy to get to for placing bike rack.

Bob G.

7/22/2017

Use it all the time. Needed a new tighting handle though. They should ne metal not plastic.



by:
2017 Infiniti QX60

trailer hitch for 2017 infiniti qx 60 works great after 1 year. No problems! Great cost when compared to dealer.

Chad M.

5/27/2020

works great! no issues!



by:
2013 Infiniti JX35

I got this to go on our Infiniti JX35, and it works great. It took less than an hour to install, which I did on my own when it was cold out! I went with this hitch as wanted minimal parts showing, and this one fits the bill. The small amount of trimming that was required was easy, I just used a sharp utility knife and took my time. When you install this, do the exhaust side first, learn from my struggles!
Works great and has a clean install look.

Will C.

1/29/2017

Everything is great, use it with a bike rack and a luggage rack!



by:
2019 Infiniti QX60

Finally got around to mounting the hitch to my Infiniti QX60. Was unable to remount the fascia trim brackets that had to be removed for installation because once the hitch bolts were tightened down, the central hitch part actually presses upwards into the fascia trim and warps the natural flow of the fascia trim a bit ( I did indeed make the cuts to the fascia per the directions). Not a big deal as the pressure stiffens the fascia trim and there is no fluttering. However, I will get a couple pieces of aluminum and make some new brackets to remove any possibility of movement. The attached photo shows the hitch pressing the fascia up a bit and the outer edges of the fascia being pushed down. If that upward pressure was not there, I would have given this hitch 5 stars.



by:
2014 Nissan Pathfinder

I ordered this trailer hitch for my 2014 Nissan Pathfinder… I watched the video that etrailer.com made, and decided it looked like a project I could try to do myself. I am not a mechanic, but I am decently handy with tools. I placed my order knowing that I needed the hitch to arrive the next week so that I could do the installation when I had some time off from work. The day after I placed the order I got a very pleasant phone message and email from a girl named Carla from etrailer.com. She told me that One of the products that I ordered was not in stock. She told me I had three options. One option was to wait two weeks until the backordered product was available, another option was to split my orders shipping apart but pay extra for that, or a third option was to buy a different Hitch ball assembly that Carla had found to be almost the same, but in stock.

This was one of the best online shopping experiences I have had, because of the personal touch from the cute girl with the southern accent that called me to talk about the options that were available due to a problem with my order. I love the fact that she was so personal, relatable, and not automated. I love the fact that she gave me three great options instead of just some lousy automated response that would tell me I'm shafted. I love the fact that the girl who called me was pleasant, kind, and located in the company, in the state, in the country, where I was buying the product. She was so helpful. She left a voicemail for me, she called me again, and she emailed me to be sure I got the message. This is what I call great service. This experience of service is what will make me want to buy from this etrailer.com again!!!

The hitch arrived in good condition, although the box was broken and the large metal sides of the hitch were protruding through the box by about 6 inches. Nevertheless, the product was not damaged at all. All the other products were also in the large box, in a smaller box.
I was able to follow the instructions on the instructional video that was provided, and I was able to put the hitch on my pathfinder by myself! This took a little bit of ingenuity, because I don't have a lift and I was alone. So I had to prop up the heavy-metal hitch assembly on some crates and shimmy it up with some planks of wood to just the right height so that I could boat in the other side. It worked! This particular hitch seems perfectly designed, and fit perfectly on the 2014 Nissan Pathfinder that I have. I am extremely satisfied.

I am extremely satisfied with my purchase from a trailer.com



by:

I was looking for a hitch that would protrude as little as possible and be easy to install. Thanks to the etrailer's review and installation videos I chose exactly the right hitch to meet my criteria.

Everything but the Curt receiver is tucked up under the bumper, and the step-by-step installation video gave me the confidence and tips to make the job very easy.

My order was shipped promptly, delivered fast, and is now installed. I like to support companies that go the full measure - so etrailer.com has my full endorsement.



by:
2015 Infiniti QX60

I'm not a "mechanically" handy person so following the instructional video was perfect.
Quick tips -
-2015 QX60 you can lower the spare to the ground with no need to remove it.
-The treads that the hitch will be mounted in were rusted so it took a good amount
of rust cleaner and I used the (removed) tow mount bolts to clean and thread the
holes. If you don't have an impact gun a breaker bar worked well to help in
achieving the perfect torque.
-Mount the hitch loosely -hold it against the bottom fascia- mark the area to be cut
(2.5 x 1.375) - drop the hitch and use a shape utility knife to EASILY cut the plastic.
The end result looks great and installed as easily as shown!



by:
2013 Nissan Pathfinder

I received the trailer hitch in a reasonable amount of time and the installation time was very accurate. Took about an hour and a half without using power tools and no lift or help.
Would recommend this company for any one seriously thinking about installing a trailer hitch.



by:
2014 Infiniti QX60

Works great for trailering my small sailboat and for my bike rack with my 2014 QX60. Ordered in the afternoon and it arrived the next day even on ground shipping. Took my local mechanic a couple hours to install the hitch and the Curt T-Connector Wiring.



by:

Installation videos were very helpful. Quality product.



by:
2014 Nissan Pathfinder

After 1 year I have had zero problems with my hitch. Installation was pretty easy and took me about 2 hours to complete. I only use this hitch for a 1up-usa bicycle rack



by:
2013 Nissan Pathfinder

The product was perfect. The shipping and correspondence couldn't have been any better. Picture shows it mounted up on a 2013 Pathfinder with a Yakima Swing Daddy bike rack.



by:

Ended up having to trim a little more off the bumper fascia than the instructions stated, but other than that it was a perfect fit and easy to install. Looks as good as factory install in my opinion and for a fraction of the price.



by:
2016 Infiniti QX60

The wrong size mounting bolts were included. It came with six identical bolts, but all were too small in diameter. I had to reuse the four factory bolts that held the two hook in place, but now I am missing two bolts.

Etrailer Expert

Jenny N.

3/15/2023

This is something that we actually hear quite often. Most of the time what has happened is that the bolt holes in the vehicle have a buildup of road debris and corrosion in the weld nuts. It can take elbow grease to clean out the weld nuts using a wire brush and soaking them with PB Blaster beforehand. You can use a brush like part # DW00254. Or if it just will not clean out then using a tap wrench kit like part # PT22FR may be needed.

Andrew

3/15/2023

I appreciate the insight... that wasnt the case with these. I could fully push the Curt bolts into the chassis holes without them engaging the chassis threads at all. The chassis holes were simply a larger size than the bolts that Curt included. Again, in a pinch, I just repurposed the four Infiniti bolts that I had just minutes earlier removed when I took the Tow Hook off to make room for the Curt Hitch. Ive already ordered two additional bolts from Infiniti so that I can fully use all six hitch holes.

Etrailer Expert

Jenny N.

3/23/2023

I have received confirmation that in this case the bolts from Infiniti are safe to use. I would say that this is the first time I have heard of the included bolts being too small for the 2016 Infiniti QX60.



by:
2014 Nissan Pathfinder

Fast delivery and easy Instal! I only have a torque wrench and a small 1/4 inch socket set so I had the dealer take off the tow hook. Great directions and video!



by:
2015 Nissan Pathfinder

Excellent sturdy product that was very easy to install. The instructions and video were great, that was found on your website.



by:
2016 Infiniti QX60

Great product.installation was easy but you need another person to help you.Need to cut the bumper a little bit in my QX60.Looks great under the bumper.



by:
2014 Nissan Pathfinder

I'm very happy with this tow hitch. What really impressed me, it's a quality product and excellent price, very fast delivery time. I really like there was a video of, how to install tow hitch for my car model. I definitely give five star for this seller, for their hard work. Thank you very much.



by:
2019 Infiniti QX60

Installed with my brother in about one hour. Just watch the video and follow the instructions. Looks great!



by:
2015 Infiniti QX60

Great workmanship. Exceeded expectations and I would recommend it to anyone. Installation took a little longer because of the amount of rust on the vehicle but overall was very easy


25
174
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Which Trailer Hitch for a 2019 Infiniti QX60 Offers Best Ground Clearance
    The trailer hitch we offer for a 2019 Infiniti QX60 (All Models Including Pure/Luxe) with the best ground clearance is the Curt Trailer Hitch Receiver part # C13126 which will measure around 12-3/4" from the ground to the bottom of the trailer hitch.
    view full answer...
  • Curt Trailer Hitch that Fits 2017 Infiniti QX60
    We do have a Curt hitch that fits your 2017 Infiniti QX60 with the part # C13126. This has a 600 lb tongue weight capacity so it would work great with a hitch carrier like you mentioned. I attached an install video for you to check out as well.
    view full answer...
  • Fascia Trimming Required to Install Curt Trailer Hitch on 2020 Infiniti QX60
    Definitely - to install the Curt Trailer Hitch Receiver # C13126 on your 2020 Infiniti QX60 you only have to trim a small portion of your vehicle's fascia, just a 2-1/2" x 1-3/8" section. This is going to be underneath your Infiniti so it won't be noticeable at all and doing this will allow the hitch receiver to sit up flush against your Infiniti's bumper, giving it a clean look. I have added a link to a video install as well as the installation instructions for you to check out of the...
    view full answer...
    Image 1 for
  • Is there a Wiring Mounting Bracket on the Curt # C13126 Trailer Hitch for a 2013 Nissan Pathfinder
    Due to the profile of the Curt Class III trailer hitch # C13126, most of the hitch crossbar is recessed under the rear fascia of a 2013 Nissan Pathfinder. Therefore this hitch does not include a mounting location for trailer wiring. Since there is limited space on the hitch crossbar, a mounting bracket is not included on the hitch. Additionally, the rear fascia has to be trimmed to complete the installation of this hitch. I have included a photos showing this hitch installed on a 2013...
    view full answer...
    Image 1 for Image 2 for
  • Complete Trailer Towing Setup for 2018 Infiniti QX60
    Congrats on winning the trailer! Even though your teardrop is small and light I still recommend the higher-capacity hitch option from Draw-Tite, part # 76031, since it offers an easier installation than the lower-rated Curt model # C13126. Extra capacity translates into more safety margin, which is always a good thing in towing applications. I linked the written instructions along with a complete install video to show you how the hitch bolts on and the included photo shows the nice clean...
    view full answer...
    Image 1 for
  • Trunk Mount Bike Rack, Trailer Hitch, and Hitch Bike Rack for 2014 Nissan Pathfinder with Spoiler
    Since your 2014 Nissan Pathfinder has that rear spoiler I do not recommend using the Thule OutWay, # TH45JV because it would put stress on that spoiler which it is not meant to support. If you wanted to go with a hitch mounted bike rack that is also possible. If you need a hitch the most popular option is Curt hitch # C13126. I have linked a video showing how it installs. With the hitch installed you could then use a hitch mount bike rack such as the popular Camber, # TH9058. I have linked...
    view full answer...
  • Trailer Wiring Harness for 2014 Infiniti QX60
    The Curt hitch # C13126 that you referenced is currently the only option for your 2014 QX60. This is a Class III hitch with a 2-inch receiver opening. For a trailer wiring harness you can use part # 118670 if you do not have the tow package or part # 118273 if you do have the tow package.
    view full answer...
  • Recommended Trailer Hitch for 2013 Nissan Pathfinder
    Given the choice between the Draw-Tite and the Curt receiver hitch for your 2013 Pathfinder, I'd lean more toward the Draw-Tite hitch for the following reasons: -The Draw-Tite # 76031 has a capacity that's higher than the other hitch. You'll be limited by the capacity of the vehicle, but the higher capacities indicate that the hitch might be a bit more durable in the long run. -The Draw-Tite hitch is a less expensive by a few dollars. I don't mind paying a bit more if there's a difference...
    view full answer...
  • Should Additional Transmission Cooler be Used When Towing at Max Capacity with 2014 Pathfinder
    If you are planning on maxing out the 5,000 lb towing capacity of your 2014 Nissan Pathfinder then yes, it would be wise to install a supplemental transmission cooler like the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13502. Since you will really be pushing your transmission to its limits this additional cooler will help to reduce some of the heat stress, but towing at max capacity will still be pretty rough on your vehicle. I also recommend using the Equal-i-zer Weight Distribution...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for 2013 Infiniti JX35 for Towing Sea Doo Trailer
    For your 2013 Inifiniti JX35 the Curt hitch part # C13126 is what I would recommend. Like you said it's much more hidden so it's easier on the eyes. It's also priced a little better as well and has more than enough capacity for your Sea Doo and trailer. For trailer wiring you would want the Curt Powered Tail Light Converter Kit with 4-Pole Flat Trailer Connector Item # C56190KIT. I attached an install video for this for you to check out as well on a vehicle just like yours down below. Since...
    view full answer...
  • Does the Rear Fascia of a 2013 Infiniti JX35 Need to be Trimmed to Install a Curt Hitch # C13126
    Yes, you will need to modify the rear bumper of your 2013 Infiniti JX35 to install the Curt Trailer Hitch # C13126. If you check out the installation instructions that I attached for this hitch you will see that the vehicle they use in the instructions is a JX35 like yours and will require the bumper to be modified. The hitch opening will hang right below the bumper, but the majority of the hitch will be out of plain sight.
    view full answer...
    Image 1 for
  • Does Bumper Fascia of 2013 Inifiniti JX35 Need to Be Modified to Install a Hitch
    Whether you'll need to modify the bumper fascia or not will depend on which hitch you choose. The nice thing about the Curt Class III you mentioned, part # C13126 is that the entire hitch with the exception of the receiver opening is concealed behind the vehicle bumper. According to the installation instructions, a small (1-3/8 x 2-1/2 inch) area of the underside of the bumper fascia would need to be trimmed away. I've linked you to photos showing the area that would be trimmed and how...
    view full answer...
    Image 1 for
  • Recommended Maximum Towing Capacity of 2013 Nissan Pathfinder
    The actual towing capacity of a vehicle is a function of both the vehicle itself, as rated by the auto maker based on the specific equipment included, and of the particular hitch that is installed. Although all the hitches we offer for your 2013 Pathfinder are the 2-inch type, these have varying towing capacities. For instance, Curt Class III hitch # C13126 is rated for 4000-lbs towing, but if used along with a weight distribution (WD) system such as the Reese # RP66084 the hitch capacity...
    view full answer...
  • Which Hitch, Trailer Wiring Harness and Towing Accessories for 2016 Nissan Pathfinder
    If the vehicle doesn't already have a trailer connector, you'd need the # C56281 to add a 4 pole or # 118273 to add a 7-way. If the trailer you're planning on towing has electric brakes, you'll also need a brake controller to actuate them. The Brake EVN # TK63VR is an inexpensive but great preforming brake controller. The 3050-P brake controller wiring harness is also needed. The Curt # C13126 hitch you've looked at is a confirmed fit for a 2016 Pathfinder. You'll also need a ball mount...
    view full answer...
  • Solution for Carrying Cargo with a 2013 Nissan Pathfinder with a Naked Roof
    I checked with all of our roof rack manufacturers, and they do not list anything for your 2013 Nissan Pathfinder with a naked roof. I suspect maybe it's because you have a large sunroof or something else that is preventing the roof from being able to carry any weight or install a rack. The best solution for carrying cargo I could recommend would be to install a hitch like the Curt Hitch part # C13126 and then use an enclosed cargo carrier like the Yakima EXO Swing Away Enclosed Cargo Carrier...
    view full answer...
  • Does Trailer Hitch Hardware Have to be Torqued to the Specifications in the Instructions
    The hitch is rated for its given capacity when installed according to the installation instructions and that includes the torque ratings specified in the instructions. If they are too tight you can damage the hitch and vehicle frame. Not tight enough and the hitch could come loose. If you do not have a torque wrench many auto parts stores will loan out tools. I recommend calling around to a few places to see if they have a tool loan program so you can torque down the hitch hardware to...
    view full answer...
  • Recommendation on a 2 Inch Hitch for an Infiniti QX60 AWD
    We have two 2" hitches that will fit your 2015 Infiniti QX60 AWD. Of the two hitches, I recommend the Draw-Tite Class IV Hitch, # 76031, over the Curt Class III Hitch, # C13126. The Draw-Tite Hitch has a higher towing capacity than the Curt hitch and our installers find the Draw-Tite hitch easier to install. The Draw-Tite hitch is custom-fit for your vehicle and will attach to your Infiniti's frame using already existing bolt holes. No drilling into the frame will be required. If towing...
    view full answer...
  • Trailer Hitch Hits Carbon Cannister Cover On 2015 Infiniti QX60
    It sounds like you are referring to the carbon cannister cover. The Curt Trailer Hitch Receiver part # C13126 which is a fit for a 2015 Infiniti QX60 does not show any modifications needed to this for proper fitment. The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76031 which is also a fit for a 2015 Infiniti QX60 does show trimming of the carbon cannister required for proper fit. If you are having fit issues I recommend trimming the cannister cover.
    view full answer...
  • Hitch and Wiring Harness for 2014 Nissan Pathfinder
    I have attached a video of the Curt Trailer Hitch Receiver, # C13126, being installed on a 2014 Nissan Pathfinder for you. As for the Pollak 7- and 4-Pole Trailer Connector Socket, # HM40975, this would be used in conjunction with a factory pigtail which comes with the factory tow prep package. I have also included a video which shows the process. In order to equip your vehicle with a 7 way and not use the factory pigtail, you would need to install T-One Vehicle Wiring Harness, # 118670,...
    view full answer...
  • Trailer Hitch and Towing Accessory Recommendation for 2014 Infiniti QX60
    We do have hitches that will work for your 2014 Infiniti QX60, but the # 76034 you specified is a fit for the Ford Explorer, and wouldn't fit your Infiniti. Not only are the frame members at a different width, but the mounting holes are all different and wouldn't match up. For your QX60, I'd recommend the Curt Class III, part # C13126. This is a mainly concealed installation, which means that the only visible portion of the hitch will be the receiver tube and the safety chain hoops. If...
    view full answer...
  • Does a Trailer Hitch Provide Additional Protection in the Event of a Crash
    I would imagine that installing a trailer hitch like the Draw-Tite # 76031 or Curt # C13126 on your 2015 Nissan Pathfinder would help minimize damage to your vehicle in the event of someone rear-ending you (as opposed to not having one), but this isn't something that is tested for and rated on the trailer hitch so I can't really say that it does. Ultimately it will add some rigidity, but it could also potentially interfere with crumple points. If you are debating between the Draw-Tite...
    view full answer...
  • Will a Trailer Hitch Fit a 2018 Infiniti QX60 with Backup Sensors
    I reached out to Curt, who makes the Curt Trailer Hitch Receiver part # C13126 for your 2018 Infiniti QX60 (excluding Hybrid) and they informed me that the hands free liftgate feature will still work but you will need to position your foot on either side of the receiver tube. They did not mentioned any kicking motion. I don't believe the surround sensors, backup sensors, or pre collision avoidance features will be hampered by the hitch but the pre collision avoidance has not been tested....
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch for a 2020 Infiniti QX60
    Yes, the Curt Trailer Hitch Receiver part # C13126 is a confirmed fit for a 2020 Infiniti QX60 and it offers a bolt-on installation. Furthermore, the Curt hitch has a hidden design which means you only see the receiver tube so you don't have to look at a bulky cross tube at the rear of your vehicle. In regards to installation, this should only take around an hour or so and you don't really need any special tools either so you can do this at home by yourself. If you will be towing then...
    view full answer...
    Image 1 for
  • Recommended Bike Rack To Carry Beach Cruisers W/ 2019 Infiniti QX60
    For your 2019 Infiniti QX60 I recommend the Yakima HoldUp Bike Rack for 4 Bikes - 2" Hitches - Wheel Mount Item # Y02443-2 which can accommodate 4 bikes weighing up to 50 lbs each with tires up to 3" wide. This rack will fit perfectly on your QX60 once you get a trailer hitch receiver installed. If you have not already decided on a trailer hitch receiver for your vehicle I recommend the Curt # C13126 due to it having a hidden crosstube meaning that once installed only the receiver itself...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.