Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(18 reviews)
Price: $276.42
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13041
Retail:$415.95
Our Price: $276.42
You Save: $139.53
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (18)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13041
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- Concealed Cross Tube
- CURT
- 600 lbs TW
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13041 Curt Class 3 Trailer Hitch Receiver
Compare to Draw-Tite 75140
Installation Details
This Product Fits The Following Vehicles
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13041
Average Customer Rating: 4.8 out of 5 stars (18 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Obsolete Automotive03/08/2024
Overall the installation went smoothly. There was one issue. The brackets included that are supposed to be bolted to the bumper bracket did not have the holes drilled in the right spot for my 1985 B150 shorty. I had to elongate the holes to get them to work. (See photo)
by: Lori 11/24/2023
Dodge Ram Pickup
I was looking for a hitch for my 1989 dodge ram camper van. I talked to a gentleman at the trailers and he was able to help me order what I needed. It arrived in a timely manner and my mechanic had no problem installing it. I now can haul my boat and bike rack when I go exploring! I would highly recommend!
by: Robert 01/27/2024
1989 Dodge Van
The Curt trailer hitch receiver is well made,beefy and strong. The fish wires that came with it is ingenious. My son and i installed it in two hour's with the help from a jack and impact. Good job Curt
by: Mike 12/01/2022
Etrailer was extremely helpful. O'Reilly' autoparts weren't able to get me the the correct hitch or anyone else
by: Jerry M.06/19/2017
Once again the guys at etrailer provide a bolt on no drill receiver.
Had no problems installing, spent more time searching for my tools, :)
by: John 05/29/2020
1986 Dodge Van
Just received hitch looks awesome. Looking forward to install. Quality looks very good.
Came with all necessary hardware. Price was very reasonable.
John
5/30/2021
After 1 year the hitch still looks new. Haven’t had any problems. Thanks for a great product.
by: Anthony 02/15/2021
I believe this is the third hitch l’ve purchased from etrailer over the years. Fast shipping and never a problem. The Curt hitches are robust, well made and always properly fit the vehicles I purchased them for.
by: AB09/26/2019
Awesome Hitch. Easy to install and a great addition to the camper van. Would recommend to anyone who is looking for an affordable trailer hitch that is versatile and looks great. Thank you etrailer!
by: Daniel Eshman07/01/2015
1996 Dodge Van
I received trailer hitch and timely manner the hitch went on without a hitch everything good Electrical adapter just plug right in and everything worked.very pleased, thank u, Dan.
by: Bill B.09/29/2015
Dodge Van
This hitch bolted right up to my 22 year van. I want to haul a motorcycle with me when I travel in my Roadtrek van and this hitch receiver is doing the job. Well made, great instructions, very easy to install.
by: Jeremy09/08/2021
The straps that attach to the bumper bolts don't line up quit right for my 1990 Dodge Van. The bumper brackets are curved and the strap doesn't follow the contour.
by: Dave 10/14/2019
Very happy with the purchase, fit right in, balanced it on a floor jack. Good hardware with the nifty bolt installer.
by: Gene05/13/2018
Dodge Grand Caravan
The hitch fit just like I expected. I like the solid feeling it gives the caravan.
by: Ruben 10/08/2022
by: Mark 10/03/2022
by: Justin01/16/2021
by: Andrew 09/19/2023
by: Will 10/19/2023
18
18
See what our Experts say about this CURT Trailer Hitch
- 1985 Dodge Ram D250 Van Trailer Hitch RecommendationFor a hitch for your 1985 Dodge D250 Van we have the Draw Tite hitch part # 75140 which is a confirmed fit and would work well.
view full answer... - Trailer Hitch taht FIts 1997 Ram Van 1500 Short WheelbaseFor your 1997 Dodge Ram 1500 van we have the Curt hitch part # C13041 as a confirmed fit but the # 13590 is not what you would need. The cut out in the side of the mounting bracket is designed to fit around your gas tank feed line.
view full answer...
- Trailer Hitch Recommendation for a 1997 Dodge VanI recommend checking out the Curt Trailer Hitch Receiver # C13041 for your 1997 Dodge Van with the regular bumper. This is a Class III hitch with a 2" receiver rated for 600 lbs tongue and 6,000 lbs towing so it will be prefect for basically any application for you - just be sure you check these weight ratings with what your van itself is rated for and that you don't exceed the lower of the two. If you plan on using this for towing then you also need the Curt Wiring Kit # C59236 and a...
view full answer... - Recommended Trailer Hitch for 1997 Dodge B3500 VanThe Curt # 13590 is confirmed to fit on the 1997 Dodge B3500 that has the factory step bumper. If your van doesn't have the step bumper, an option is the Curt # C13041. Both are designed for the Dodge Vans and are built to accomodate the different styles.
view full answer... - Mounting Hole Width Of Curt Trailer Hitch Receiver For a 1997 Dodge B3500 VanOur Curt Trailer Hitch Receiver # C13041 and # 13590 that are designed to fit your 1997 Dodge B3500 Van both have a width of 40" from the bolt hole center to bolt hole center. The Curt # C13041 is to be used with a standard bumper while the Curt # 13590 is for vans with a factory step bumper.
view full answer...
- 1992 Dodge Ram 250 Conversion Van Hitch RecommendationThe Zephyr conversion didn't do anything to change the rear bumper and frame area of your 1992 Ram 250 van, so a standard hitch would work great for you. I'd recommend the Curt Class III Receiver Hitch # C13041. The hitch has a 6000 lb towing/600 lb tongue weight capacity. If used with a weight distribution system, that would climb to 10,000/1000 lbs. In other words, the hitch will have more towing capacity than the van, although you'll be limited to the actual capacity of the van. The...
view full answer...
- Trailer Hitch Receiver For 1997 Dodge VanThank you for the photo, and in regards to the carrying capacity, you'd need to check your owner's manual to see if your 1997 Dodge Ram conversion van has a tongue weight capacity, which would be the maximum limit you can carry. Assuming that is more than the combined total of your bike and the rack, there is a hitch that has the needed tongue weight capacity of 600 lbs (assuming that your bike and rack weigh less than that). From you photo it looks like your '97 Ram has the standard bumper...
view full answer...
- Thule T2 Classic VS Thule DoubleTrack Pro XT for a 1997 Dodge Van with Spare TireI went ahead and confirmed with Thule that the distance between the center of the hitch pinhole to the first bike position on the DoubleTrack Pro XT # TH92BJ measures 6 inches long. The same measurement on the Thule T2 Classic # TH9045 is only 3-1/2". The T2 Classic is also only available for 1-1/4" hitches, so it won't be compatible with a 2" hitch. If you are absolutely set on using the # TH92BJ, you can always purchase a hitch extender to get the length you need. The first thing you...
view full answer...
- Trailer Hitch and Wiring for a 1997 Dodge B3500 Full Size VanCurt trailer hitch # 13590 is designed to fit 1997 to 2003 full size Dodge vans with the factory step bumper. Your 1-ton van is a full size model so as long as it has the factory step bumper the hitch will fit. If it has the standard bumper and not a step bumper then the Curt hitch you would need is # C13041. For either hitch I recommend etrailer ball mount kit # EBMK2216. It comes with a ball mount with a 1 inch rise or 2 inch drop, 2 balls, and hitch pin with clip, and a storage bag....
view full answer... - What Trailer Hitch For A 1985 Dodge Van Has The Highest Capacities?I have a different option for you, but there is not a Class IV hitch confirmed to fit your 1985 Dodge Van. A Class III hitch is actually the most common hitch found on trucks, vans, and SUV's and should be perfect to match the towing capacity of your van, if not exceed the towing capacity of your vehicle. I recommend going with the Curt Trailer Hitch Receiver # C13041 which has a 600lb tongue weight rating and 6000lb trailer weight rating, or 1000lb tongue weight rating and 10000lb trailer...
view full answer... - Hitches to Fit 1987 and 1995 Dodge VansThere are three hitches that fit the full-size 1987 Dodge Van with a standard bumper. These are parts # 75140, # 87492 and # C13041. The hitches that fit the 1995 Dodge Van (again the full-size with standard bumper) include three shared parts, # 75140, # 87492 and # C13041. But the other hitches that fit the '95 are not common fits with the '87. The hitches for the '95 appear on the linked page. If you have a hitch that can fit the '95 you can install it using Replacement Hardware kit # RHK.
view full answer... - Front Bumper Bike Rack for RVWe currently do not carry any bike racks that are specifically for the front bumper of an RV. There are a couple reasons for this; bikes mounted on the front of the vehicle can block your line of site, headlights and turn signals and the airflow to your engine. If your RV has a continuously welded steel bumper that is between 4"-4-1/2" wide you could make the Swagman Around the Spare 2 Bike Rack # S80501 work, but again, I'm not sure it would be the safest option for you unless you mounted...
view full answer... - Recommended Hitch for a 1997 Dodge Van I have a couple of rear mounted hitches that will work on your 1997 Dodge 3500 van but they don't make any front mount ones. Sorry about that. Which rear hitch you will need is going to depend on what kind of rear bumper you have. I have listed both options below: Standard Bumper - Curt Trailer Hitch Receiver item # C13041 Step Bumper - Curt Trailer Hitch Receiver item # 13590 For a e-bike rack, I recommend the Hollywood Racks Sport Rider SE Bike Rack item # HLY84FR. This is our highest...
view full answer... - Best Way to Carry Bikes on 1994 Dodge 350 Camper VanI have a solution for you, but unfortunately we do not have a front mounted hitch for the 1994 Dodge Camper Van. Since carrying bikes on the front of a vehicle can impede your head lights and turn signals, as well as potentially add unneeded stress to your vehicle by restricting airflow to your engine, I would recommend another method altogether if possible. If your camper van has a spare tire, I recommend using a spare tire rack like the Malone Hanger Spare T3 OS # MPG2147 which fits...
view full answer... - Trailer Hitch Options for a 1987 Dodge Ram Van with Ambulance BodyWe do have a couple of trailer hitches that fit the 1987 Dodge full-size vans. From Draw-Tite we have # 75140 rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. And from Curt we have # C13041 rated for 600 pounds tongue weight and 6,000 pounds gross trailer weight. Both of these are Class III trailer hitches with 2 inch receivers. Current pricing is available on the product pages. The hitches will definitely fit the frame of the van but if the ambulance body hangs...
view full answer... - Trailer Hitch for 1995 Dodge B3500 RVThere is a trailer hitch for your 1995 Dodge B3500 RV, but it is a rear-mounted hitch; there aren't any front-mounted hitches that fit this particular vehicle. I confirmed with the manufacturer that the Curt Trailer Hitch Receiver # C13041 is a fit for a '95 Dodge B3500 so long as it does not have a factory step bumper. I have added a link to the instruction manual of the hitch for you to check out as well.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jameson C
Written by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jerry M.
6/19/2018
Had my receiver over a year and no problems whatsoever. Thanks.