Mounting Hole Width Of Curt Trailer Hitch Receiver For a 1997 Dodge B3500 Van

Question

Question:

Just took my 1997 Dodge B3500 Extended Body cargo van to a shop here in Phoenix and they said the receiver they got would not fit my van 4inch short in width and he could not find one that did. Do you have a receiver that will fit and can you supply me with the dimensions? I cant seem to find that information. Thank You

asked by: David J

0

Expert Reply:

Our Curt Trailer Hitch Receiver # C13041 and # 13590 that are designed to fit your 1997 Dodge B3500 Van both have a width of 40" from the bolt hole center to bolt hole center.

The Curt # C13041 is to be used with a standard bumper while the Curt # 13590 is for vans with a factory step bumper.

expert reply by: Bud M

0

Mounting Hole Width Curt Trailer Hitch Receiver # 13590
(click to enlarge)

Answer 1

The Curt #13590 is confirmed to fit on the 1997 Dodge B3500 that has the factory step bumper. If your van doesn't have the step bumper, an option is the Curt #C13041. Both are designed for the Dodge Vans and are built to accomodate the…

view full answer...

Answer 2

There is a trailer hitch for your 1995 Dodge B3500 RV, but it is a rear-mounted hitch; there aren't any front-mounted hitches that fit this particular vehicle. I confirmed with the manufacturer that the Curt Trailer Hitch Receiver #C13041 is…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Mounting Hole Width Of Curt Trailer Hitch Receiver For a 1997 Dodge B3500 Van

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching