Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(160 reviews)
Price: $184.62
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11416
Retail:$289.95
Our Price: $184.62
You Save: $105.33
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (160)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11416
- 1-1/4 Inch Hitch
- Class I
- 2000 lbs GTW
- Visible Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
- Hitches assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11416 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2016 - 2022 Honda HR-V All Wheel Drive
- 2016 - 2022 Honda HR-V Front Wheel Drive
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11416
Average Customer Rating: 4.8 out of 5 stars (160 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Dr John04/21/2017
Ford Edge
I needed a hitch for my bike rack and this looked to be just the ticket. I was aware that the muffler would need to be lowered in order to fit the hitch.
I jacked up the rear passenger wheel and put it on a concrete block to give me about 4 extra inches of clearance to work with. The drivers side wheel was on the ground. Getting the rubber muffler mounts off was the most difficult part of the installation. After much cursing trying to push the rubber mounts off I pushed a fine flat blade screwdriver between the rubber and steel mounts and lubricated with dish soap - voila - off they came. Leave the innermost rubber attached to the car, the outer most to the muffler - they go back on very easily that way. You do not need to bend the heat shield, the hitch will slide under it. I was a bit dubious about cutting the plastic tray for the driver side mount but here's how i did it. 18mm socket to undo the 4 plastic bolts - then 10mm to get the small bolt on the driver side and a philips screwdriver to get the two screws out by the rear bumper on the drivers side. - Measure carefully and mark the area to cut away - mine was about 5 inches long and 4 inches wide - I used a spiral saw on my Dremel and sanded the cut edge smooth. I then remounted the plastic tray before attaching the hitch. The supplied fishing wires worked great and it was easy to get the bolts into the holes in the frame. start with the passenger side making sure not to trap the rubber muffler mount - then do the u-bolt on the tow point then the driver side frame bolt - torque them all up and put the muffler back on - the outside rubber goes back onto the car very easily the inner on is a bit harder but soap helps.
Took me about an hour total - most of which was repeated measuring and marking before I cut the rear underbody plastic tray.
All in all a nice product and it looks really neat.
by: Sean 05/25/2024
Seems high quality. Nice finish. Well packaged. Easy install, other than removing the muffler hangers install takes maybe 10 mins. My fourth hitch order from these guys. Best price, great service and happy with the equipment
by: Tom06/11/2022
Installation was on a 2022 Honda HR-V AWD and it went very well without any problems. It took me a little over an hour the hardest part of the install was getting the rubber muffler mounts back on. The instructions included with the hitch along with watching one of the install videos on website are very well done! Would recommend Curt/Etrailer to anyone!
See pics one with bike rack and one without.
Tom
10/4/2022
No complaints here, great product!
by: Gege04/28/2023
2022 Honda HR-V
Quick shipping, quality of product is great and installation was easy, only takes about 5 -10 mins to install if you’re not [incapable] and able to comprehend basic instructions.
by: Souk06/12/2022
2016 Honda HR-V
This thing has some weight to it! It's very study and I love it! I initially got a 1 and 1/4 in hitch, but glad I decided to return and get the 2in hitch, especially because I may be supporting 2 e-bikes in the future. I took my part to a local RV place based on etrailer.com's local installation lookup. It only took approx 2 hrs to get professionally done, I made sure the local place was also strong in reviews. It's been a week so far since I've had this installed, no problems. The bike rack that I bought was from 1up USA super duty double. I tested the setup at fairly high speeds since I live in California and no issues with keeping everything secure. Carol and Tammie was super helpful and awesome in making sure I got the right part. The local install suggestion also made sure they gave me a accurate estimate and made sure I got the right part for my needs. I am thankful my friend showed me this website and I bought my hitch from here. Thank you etrailer!
by: Margo10/10/2023
As installed, the mounting bolts touched the muffler and it rattled. The muffler shop turned the bracket around so that the bolts faced away from the muffler and the problem was solved.
by: Glenn09/01/2020
Very happy with my purchase! I don’t do mechanic work... but between the instructions provided and the installation video, I felt super comfortable taking care of this myself by borrowing my dad’s tools and garage.
This hitch receiver looks as flush and minimal as it possibly could on my 2016 Honda HR-V. I don’t think it looks aftermarket or conspicuous. I’m still waiting to see what it looks like with my new bike rack, which is on backorder (due to Covid-19), but I’m sure it’s going to be MUCH better than my old strap-on trunk rack.
by: Andres06/01/2020
Prompt delivery. This is a quality tow hitch for a good price. The installation was a breeze and fits perfect on my 2016 Honda Hr-v Ex-L AWD.
Andres
6/2/2021
Still in great condition, used it mainly for my bike rack.
by: Jonathan 05/12/2024
Installed and work as advertised
by: Charlotte 04/08/2024
worked perfectly for my car and easy to install .. very satisfied
by: Forat12/17/2023
I did work as advertised, easy installa tion.
by: Jack 11/16/2023
Clear website, easy to navigate.Excellentselection Fast shipping. All good!
by: Anthony 06/22/2023
2018 Honda HR-V
Everything looks pretty good on this hitch. The only thing I might mention is there is a bar code sticker on the hitch which I knew that sooner or later I would want to remove, because the glue residue will collect dirt. And, like most stickers they suck to get the glue residue off. So, I peeled the sticker off and then use a little gasoline and removed the glue residue. Hitch looks nice.
by: Larry05/09/2023
2018 Honda HR-V
Carol Just finished installing the hitch . Everything went fine except the muffler on passenger side is up against the short bolt and nut and rubs against the muffler so that the muffler has more sound now. Will it rub a hole in the muffler? What do you suggest I do? I am surprised!
Jenny N.
5/10/2023
Actually this can happen from time to time when the hitch installation is finished. There is a fix that involves moving the exhaust hangers a bit that will reposition the muffler. The FAQ below will help with that.
Helpful Links
by: Michael 03/10/2024
2020 Honda HR-V
Super fast shipping. Great company!!
by: Joel 08/27/2023
This hitch was easy to install and a year later is still working great
by: Randy C10/27/2016
Man, that was easy. It took me about 20 minutes. The video was spot on and straight forward. Had a 2nd hand to hold it up while I started the nuts onto the bolts. Hardest part was re-hanging the exhaust. (Use lube and a pry bar). This was on an AWD so no trimming.
by: Gary 04/06/2023
2018 Honda HR-V
Watched the eTrailer installation video a few times and then tackled the project. Super helpful video. Everything went smoothly. Great Product and Great Support
by: Joshua05/30/2020
Easy to install. Install video was extremely helpful. Did it by myself, but can see how it would be easier with two people.
by: Brian 08/21/2021
2018 Honda HR-V
This is my second Curt trailer hitch. The first stayed with the car I sold, but worked very well. They are exactly as advertised, and mine was VERY easy to install. I did it myself in about 40 minutes--that's backing my HRV up onto the ramps, to everything put away and washing my hands. Dealing with eTrailer was smooth and easy, and fast.
Brian L.
8/22/2022
Its been a year since I installed the class I hitch on my Honda HRV. performs perfectly and the powder coat finish still looks great. last fall I bought another hitch from etrailer for my new Honda CRVa type II this time. Same experience. Very easy to install with the kit they provide, and the videos show everything you need to see. Very pleased with the product and support from these folks!
by: Yogen11/26/2023
Works great! Haven’t had issue in an ye ar
by: goggs11/08/2016
2016 Honda HR-V
Great product, and very well planned installation on a brand new HR-V. The video indicated I would have to bend the muffler heat shield a little, but I installed that bolt/side first and let it lever the room it needed (practically none). I would say that getting inboard rear muffler isolation mount back on would be tough for a lot of people, as it was a tight space and required a great deal of prying - muffler backwards and rubber mount downwards.
I also purchased an adapter to go from 1-1/4" to a 2" receiver with a 4-1/2" rise, and this made using my existing 2" flat rack and bike rack immediately usable on this vehicle. The measurements suggested it would be a close fit, and the adapter was either just touching the plastic bumper (we don't want rub marks!), or about a 1/16" away from it. I ground off about 1/8" from the top tapered down about 3/4" and it's perfect.
Goggs
11/11/2017
Thanks - still love it - using it next week!
by: Randall07/25/2015
2016 Honda HR-V
Shipped fast. Instructions ok. Feedback is to tell rookies to leave rubber muffler hanger, the one closest to middle, on the upper hook and only unhook from the muffler hook , otherwise after installing the hitch one cant re-hook the rubber on the upper hanger as it is blocked by the hitch. Also, the passenger side fish wiring was harder due I think to a bigger rail and or something causing wire to travel up and unable to see in bolt hole. Used electr. wire thru small bolt hole back to bigger hole then taped to fishwire and pulled thru easily.
Really though it was fairly easy and fit well looks good and low profile.
Randall
8/5/2016
Still like it. Would suggest thinking about second hitch pin hole so canpush deeper in, more stable
by: John G.08/05/2015
2016 Honda HR-V
There was a bit if a delay in shipping due to Curt being overwhelmed by orders. They were the first to offer a hitch for the 2016 Honda HR-V. I was kept well informed by etrailer with multiple progress e-mails. I installed the hitch myself and it fit perfectly. The included instructions were a bit blurry but I already downloaded a copy from their website that was crystal clear. I would highly recommend etrailer to anyone in need of a hitch!
Steve C.
8/28/2015
To John G.: I had the hitch installed on my 2016 HRV by a local shop that has a car-lift. The shop had to remove the plastic splash under-carriage panel to install the hitch and were not able to re-mount this panel after installing the hitch. I think because the access to the panels fittings being blocked by the hitch. Did you experience the same situation? I dont want to trash that plastic splash / under carriage panel until I know it definitely cannot be installed if the hitch is properly installed.
by: luis09/07/2017
El hitch llego bien y se instalo el mismo dia. Quedo exactamente como deberia. Podrian mejorar las instrucciones de instalacion, pues requirio de leerlas varias veces y verlas en el sitio de Curtis.
[Translation: The hitch arrived well and settled the same day. I remain exactly as I should. They could improve the installation instructions, since it required to read them several times and to see them in the site of Curtis.]
Luis
9/10/2018
Perfect! no chips or dents. solid as the first day.
25
160
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Kuat Transfer or Yakima HoldUp Bike Rack on 2020 Honda HR-V?The Curt Hitch # C11416 for your 2020 Honda HR-V is a Class I hitch with a 200 tongue weight capacity. For that reason, the Yakima HoldUp # Y02445 is actually not compatible with this hitch since it is designed for Class II 1-1/4" hitch receivers. They did that because it can carry heavy electric bikes of up to 60 lbs each. 120 lbs of bike weight plus the 50 lbs rack weight can come close to maxing out Class I hitches. Either way, I would still prefer the Kuat Transfer V2 # KU74FR for...
view full answer... - Recommended Trailer Hitch Receiver For 2019 Honda HR-VI can definitiely help you get a trailer hitch receiver installed on your 2019 Honda HR-V. There are a few different trailer hitch receiver options but I highly recommend the EcoHitch Hidden Trailer Hitch Receiver # 306-X7322 as it is the only 2x2 receiver option for your vehicle which will allow you the most options for accessories like bike racks or cargo carriers. This trailer hitch receiver will require trimming to the fascia of your vehicle and has a more difficult install than other...
view full answer...
- Needing a Trailer Hitch to Fit a 2016 Honda HR-VFor your 2016 Honda HRV the Curt hitch part # C11416 has been confirmed as a fit all models and would work well for you. This is a Class I hitch though, with a 1-1/4" opening, and will require your bike rack to be Class I compatible and only carry a maximum of 2 bikes. It has a 200 lb tongue weight capacity and will require a stabilization strap # 18050 for unsupported loads like bike racks or cargo carrier. There is also the EcoHitch # 306-X7322 that has the more desirable 2" receiver....
view full answer... - Hitch Receiver Compatibility for a 2022 Honda HR-VYes, the EcoHitch Hidden Trailer Hitch Receiver item # 306-X7322 will fit your 2022 Honda HR-V. It is custom fit and bolts directly to your Honda with included hardware.
view full answer... - Hitch Recommendation for a Honda HR-V With Front Wheel DriveFor your 2021 Honda HR-V with front wheel drive, you will definitely want to go with the Curt # C11416.This is a great hitch for your HR-V. The Curt # C11416 technically does not need the stabilizing strap # 18050, but the installation instructions say that you must use it, so I would. It does give more support when a bike rack or cargo carrier is used. You could also go with an anti-rattle device like the Roadmaster Quiet Hitch # RM-061-125 as well. This will clamp the rack or carrier...
view full answer... - Would Trailer Hitch from 2019 Honda HR-V Also Fit 2022 ModelThe Curt hitch part # C11416 fits both a 2019 and a 2022 Honda HR-V FWD so if that is what you have it would easily transfer to the new vehicle. It is recommended to get new install hardware since it's considered one-time-use. For that you'd need the part # RHK.
view full answer... - Hitch Cargo Carrier Recommendation for a 2016 Honda HR-VSince all of the trailer hitches for your 2016 Honda HR-V are Class I like the part # C11416 your best option is going to be to then go with a cargo carrier that is rated for the same hitch classification. For that the Curt part # C18145 is the most popular option. It would fit and work well on your vehicle so we would recommend it for you as well.
view full answer... - Does Curt Hitch # C11416 Have Capacity to Tow 900 lb TrailerThe Curt hitch part # C11416 that you referenced has a 2,000 lb trailer towing capacity. It would easily handle the weight of 900 lb tear trailer like you have. You'll want to check the owners manual of your HR-V to determine the vehicle towing capacities and be sure to abide by them as well.
view full answer... - Recommended Hitch and Bike Rack for a 2018 Honda HR-VCongrats on the possible purchase! To add a hitch to a 2018 Honda HR-V, I recommend the Curt item # C11416. This class I hitch with a 1-1/4" receiver is custom fit and bolts to an HR-V with included hardware. It has a 200 lbs tongue weight capacity which is the highest capacity available for your Honda. We had a 2018 HR-V in the shop awhile back so I have linked an installation video below and attached a couple of pictures so you can see what this hitch looks like once installed. As...
view full answer...
- Replacement Hardware Kit for Curt Hitch 11416We sell complete hardware kits for all of the trailer hitches we carry including the Curt # C11416 that you mentioned with our part # RHK. You'd need to select from the drop down menu Curt and enter the part number for this hitch and we'd ship you out everything you'd need.
view full answer... - Will Installing Trailer Hitch Receiver On 2021 Honda HR-V Void The Warranty?Installing a trailer hitch receiver like the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11416 on your 2021 Honda HR-V will not void the manufacturer warranty as consumers are protected by the Magnuson-Moss warranty act which states that unless the part added causes a problem, installation and use of the part will not void a warranty. I do recommend looking up this act to get make sure you aware of what it protects. I went ahead and included a video of the # C11416...
view full answer... - Preventing U-Bolt Nut Flange Overlap with Install of Curt Hitch on Honda HR-VWhen we installed the Curt hitch part # C11416 on a similar HR-V as your model we found that the trick to getting the U-bolt nuts installed properly was to tighten them down evenly so that the nuts wouldn't overlap. We have torque wrenches available too like with the part # ALL944001 as well.
view full answer...
- What Does Curt Trailer Hitch for 2017 Honda HR-VThe Curt hitch part # C11416 that you referenced weighs 25 lbs. This hitch is a fit for your 2017 Honda HR-V as well.
view full answer... - Ball Mount Recommendation for 2020 Honda HR-V with Curt Class I HitchBased on your dimensions you do need a 1 inch rise. Now that said Class I hitches you have to use only the recommended ball mount from the manufacturer would be the part # C45521. Due to the lower capacity of the Class I hitches using a longer or larger ball mount might cause excessive strain on the hitch. For a hitch ball you'd want the # A-82 for a 2 inch ball or # A-80 for 1-7/8 inch hitch ball.
view full answer... - Can Curt Euro Style Ball Mounts be Used in a Draw-Tite Class I Trailer Hitch on a 2016 Honda HR-VCurt used to put a stop in the shank behind the hitch pin hole to prevent the use of Class II accessories (which the Curt Euro ball mounts are). Curt hitch # C11416 for your 2016 HR-V does not have that stop but double check your hitch to make sure it isn't present. If not then you can use a Curt Euro ball mount! For a 1-7/8 inch ball use # C45571. For a 2 inch ball use # C45572.
view full answer... - Transporting 2 Rad Rover E-Bikes with a 2017 Honda HR-VFor your 2017 Honda HR-V, I recommend the Curt Class I Hitch, part # C11416. This has a 1-1/4" receiver with a tongue weight capacity of 200 pounds and a towing capacity of 2000 pounds. I've linked to a video installation of this hitch for you to reference. The Rad Rover e-bikes tend to weigh quite a bit, so you may have to take the batteries off to lower the weight in order to use it with the bike rack. With that in mind, you need a bike rack that can not only handle the weight, but won't...
view full answer... - Hitch Recommendation for a 2016 Honda HRVFor your 2016 Honda HRV the Curt hitch part # C11416 has been confirmed as a fit and would work well for you. This is a Class I hitch though, with a 1-1/4" opening, and will require your bike rack to be Class I compatible and only carry a maximum of 2 bikes. It has a 200 lb tongue weight capacity and will require a stabilization strap # 18050 for unsupported loads like bike racks or cargo carrier. There is also the EcoHitch # 306-X7322 that has the more desirable 2" receiver. This hitch...
view full answer... - Will the RockyMount MonoRail Fit on a Curt # C11416 and a # C11576?Yes, the RockyMounts MonoRail # RKY10003 is compatible with both the Curt receiver # C11416 and the Curt receiver # C11576.
view full answer... - Time to Install Curt Class I Hitch on 2017 Honda HR-VWe estimate that a professional should be able to install the Curt #C11416 Class I hitch in 30 minutes to an hour, tops. What you're charged will depend on the hourly labor rate of the shop you use, so if you call around to a couple of shops you trust, they should be willing to tell you their hourly labor rate and from that you can get an approximation of what they'd charge you. I've linked to installation instructions as well as a video showing the hitch being installed on a 2018 Honda...
view full answer... - Trailer Hitch and Wiring for a 2016 Honda HR-VYes, for your 2016 Honda HR-V you can use the Curt trailer hitch # C11416. Ball mount # 3593 is the correct ball mount if you intend to do any light duty towing. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # C56284 to add a 4-Way trailer connector. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with...
view full answer... - Hitch Mounted Bike Rack For Two RadCity ST3 s On A 2016 Honda HR-VThe Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Cargo Bikes # HLY84FR is the ideal option due to their ability to carry up to 80lbs per bike. The Swagman Current Bike Rack for 2 Electric Bikes # S64678 would work great as an alternative for your two RadCity ST3 bikes. If you remove the 7lbs batteries from the bikes you will be at 116lbs and would put your bikes 4 pounds under the maximum rating for this rack. Additionally you will need to use the Swagman Bike Frame Adapter...
view full answer... - 2020 Honda HR-V Trailer Hitch and Bike Rack RecommendationYou've come to the right place - I'll be more than happy to help you out! I recommend going with a hitch mount bike rack because it will be easier to load up the bikes, you get a wider variety of options, and a trailer hitch is generally much more cost-effective than a roof rack. For a more cost-effective option I recommend picking up the Curt Class I Trailer Hitch # C11416 for your 2020 Honda HR-V and then using the Kuat Beta - Folding 2 Bike Aluminum Rack # B202-114 for your bikes. This...
view full answer... - Ball Mount Recommendation for 2016 Honda HR-V with Curt HitchWith the Curt hitch # C11416 the recommended ball mount is # C45521 which is 7-1/4 inches long. Then for a ball you'd want part # 19256 for a 1-7/8 inch ball or part # 19258 for a 2 inch ball. For trailer wiring you'd then want the part # 118673.
view full answer... - Which Hitch To Install on Honda HR-V For Swagman Bike Rack - ClearanceThe Swagman # S64650 (XC-2) will entirely clear the back of your HR-V when mounted on the Curt # C11416, or the ecoHitch # 306-X7322, hitches. If I were choosing between these two hitches I would prefer the ecoHitch # 306-X7322 as it is better hidden under your vehicle and more importantly has a 2" reciever which gives you many more options of accessories. It also has a higher tongue weight capacity of 300 lbs. I have attached installation videos for both hitches and a photo of the Swagman...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John P.
4/21/2018
No problems at all with the hitch. Its easy to get my bike rack on and off the car and to mount and unmount my bike rack and is very secure. Carried 2 bikes on a 4000 mile road trip without any issues. The hitch is very unobtrusive when not in use. I would appreciate any other users feedback on the suitability of this hitch for a small trailer for hauling stuff from the DIY stores - i.e. Ball fittings and wiring harness extensions suitable for the HR-V