Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(203 reviews)
Price: $180.77
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11391
Retail:$351.01
Our Price: $180.77
You Save: $170.24
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (203)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11391
- 1-1/4 Inch Hitch
- Class I
- 2000 lbs GTW
- Visible Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11391 Curt Class 1 Trailer Hitch Receiver
Replaces 11437
Compare to Draw-Tite 24861
Installation Details
This Product Fits The Following Vehicles
- 2006 - 2015 Honda Civic Coupe - excluding Si
- 2006 - 2015 Honda Civic Coupe - Si models
- 2006 - 2015 Honda Civic Sedan - excluding Si and Hybrid
- 2006 - 2015 Honda Civic Sedan - Hybrid models
- 2006 - 2015 Honda Civic Sedan - Si models
- 2006 - 2011 Acura CSX
- 2015 - 2022 Acura ILX
- 2013 - 2014 Acura ILX excluding Hybrid
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11391
Average Customer Rating: 4.9 out of 5 stars (203 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: John 06/02/2024
Excellent buying experience. Hitch fit very well, very good instructions. Great advice from eTrailer on the pre buy phone call. Can't beat the great customer service. Thank You!
by: Ryan04/28/2023
2009 Honda Civic
good enough to make it my first purchase review. installed on my 09 civic si. For those frustrated with the written instructions, the video on how to install is thorough and easy to follow, etrailer went the extra step to supply exactly what is needed to install and installation is extremely easy, a simple socket socket and a tin snips is all you need. i was able to install myself without lifting the car at all. the plug and play wiring harness that is sold separate. was simple and works well to pull my boat trailer. Have recommended this product to others
by: James10/05/2022
2012 Honda Civic
It fit with little aggravation despite what others had warned. The videos were key in making sense of the paper instructions. My car frame had all the right holes, both in size and location, and that made for easier installation.
by: Gavin07/20/2022
2015 Honda Civic
Hey, I didn't get around to finishing the review but I was pretty unsatisfied to open the box and find the hitch looker previously installed. There were lots of scratches and a large patch where the paint was scrapped off and showing metal. The harness was fine and looked new but the hitch was most definitely installed or had been attempted to be on another vehicle.
Jenny N.
7/26/2022
Thank you for reaching about the condition of the hitch. I will have our customer service team reach out to assist you. I recommend touching up the affected area with a rust resistant paint like Rustoleum.
by: Don10/26/2022
This is a really nice trailer hitch. I bought it for my 08 civic. It fit really well and is sturdy. I've had it for about a year now and no rust so far. Would recommend.
by: André06/02/2024
2010 Honda Civic
The paper instructions are so-so. Trimming was required, but the instructions did not show how to trim the muffler heat shield. It showed how to trim the plastic cover, but the drawing was wrong. Trimming is arguably the hardest part of this install, so accurate diagrams of where to trim, or even a template, would have been nice. The hitch receiver itself looks well-made but I have not towed with it yet.
by: Odie06/14/2020
Great product! Easy to install. Pictures for what you have to cut are not clear, but I figured out what I needed to cut. Since I don’t own a truck, this is a way for me to have a way to carry large items on a trailer & not need to borrow someone’s truck.
Odie
6/15/2021
Perfect
by: Bill P.05/10/2017
Hitch arrived in a timely fashion. Installation was a breeze and the fit and finish were perfect. Wiring harness hooked up perfectly. etrailer made the whole process simple. I just ordered another hitch and harness for our new car.
by: Josh M01/09/2020
I'm happy to report that after a year, it has performed its job satisfactory.
It was a pain to fish the 2 bolts into the holes, it seems that there's only just barely enough room to get the bolts to the right position to pull through the holes. Probably internal bends or ridges in the way in the car frame.
First side was 15+minutes, but It took me a good hour for other side.
I wonder now if I could have swapped things to make it easier, or if I was doing it wrong to begin with.
But either way, I towed a 4x8 enclosed uhaul trailer packed full and possibly over weight for 1000 miles and had no problems at all with handling or performance.
by: Mike H.04/22/2015
2013 Honda Civic
Let me start off by saying that this is an excellent product. Installation was a breeze and it was a complete bolt on. No modifications was needed.
I have a 2013 Honda Civic Si Coupe and the only issue I ran into during the install was the hitch hitting the exhaust hanger for the rear muffler. The only reason this happened was because I have an aftermarket exhaust system and I am using polyurethane exhaust hangers. These hangers are thicker than OEM. It still bolted right up with alittle tweaking. I also left the rear splash panel and heat shield off for now. If your running a stock exhaust hanger, you will not run into the issue I did. So don't let that steer you away, lol.
Overall welds are great, and the construction is perfect. I would recommend this kit to anyone.
by: Solid tow hitch for my civic!05/20/2022
2008 Honda Civic
Sort of an odd installation but I guess I didn't know what to expect with my 08 civic sedan. I followed the instructional video on etrailer, which simplified everything for me! I don't plan on towing anything with it, just needed it for a Thule bike rack.
by: Michael L03/18/2019
Very fast delivery, hitch broke out of delivery box but only a little chipped paint. Pictures in directions were hard to see but there are great videos online. Installation pretty easy for the most part. Great product well worth the investment. I bought a Swagman bike rack as well both are bullet proof. Highly recommend ETrailer.com and these products.
by: Kevin S04/11/2017
2012 Honda Civic
This is my 2nd Curt hitch purchased through eTrailer originally had one on my 2012 Ford Fiesta hatch, the Civic unit went on without a "hitch".. lol. Great instructions and hardware, fast shipping and great service from eTrailer as always. Pictured with the Curt 2" Euro ball.
by: Dylan 06/03/2023
Fits and works, can't remember exactly but pay attention to exhaust side I had everything tightened except that side and realized I was under the pipe or something like that and I refused to start over so I lossened a pipe mount and did some shoving and fanangling on pipe to get it past the hitch support
Dylan
6/4/2024
Shes still on there and dont seem to be going anywhere ever, nothing is loose or bent. I only haul dirtbikes so I havent pushed the limits or nothing but Id say the product could be garunteed for the life of car at this rate
by: James06/28/2020
2010 Honda Civic
This is a high quality hitch from Curt, an American company, I think it is also made in America as well. Compared to the competition this looked more robust and had more mounting hardware and points of contact. They are some how cheaper than the other foreign companies. No problems with stuff made in other countries but these days it’s great to buy American, we only have a few companies left in certain industries.
by: Nixon C.01/02/2020
This product was great very easy to install and I used it to tow my motorcycle to the track 3-6hrs away. I have no complaints great for my Acura Ilx.
by: Tony G03/02/2017
2015 Honda Civic
Perfect fit for my 2015 Civic SI coupe. Small modification to the muffler heat shield, a pair of descent size scissors will do the job. It's mainly used for hauling my bicycle around. Would highly recommend it.
by: Gerry07/14/2021
2015 Honda Civic
The only thing that was difficult was getting the rubber muffler hanger back on, there was not much space to do it after putting the hitch frame right next to it. The hitch was installed on a 2015 Honda Civic Si.
by: Peter Z06/11/2020
2008 Honda Civic
Hitch was just as shown and described. Shipping was fast and free, and with the youtube video installing was relatively easy. I have little experience with this kind of thing and went at it solo. I didn't even jack it up. Would not recommend but I managed to pull it off
by: Laurie 08/09/2023
Worked great. Just what I needed for my new tow hitch on my civic
by: Ron05/10/2022
Product quality is what I expected. Installation was quick and easy.
Ron E.
5/18/2023
This hitch is easy to install and very secure on the vehicle.
by: Seth08/28/2020
Install took about 1.5 hours with excellent instructions and install video. The package arrived quickly, free of any damage. etrailer has the best customer service I’ve ever dealt with. I’ll definitely buy from them again.
by: Brian04/20/2022
just installed the hitch, went very good. the hardest part was to replace the
rubber mount on the muffler.
Brian
4/21/2023
i could not ask for a better product
by: Mark01/23/2022
2013 Honda Civic
That was one of the best purchases I've made mounted right on the car just like the video it was really awesome works really good thank you
by: Kevin 05/17/2023
1 yr in. I primarily use it to hold my bike rack. So far so good!
25
204
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Does the Curt C11391 Hitch for 2016 Acura ILX Come with Installation HardwareTrailer hitches like the Curt # C11391 come with the mounting hardware needed to install the hitch on your 2016 Acura ILX, so yes, as long as you've got the tools you'll get everything you need to get the hitch on the vehicle. A wiring harness is not included with the hitch, so I recommend using the Tekonsha # 118627 because of the reliability of the Tekonsha harnesses. This is a plug and play harness, so the installation is very easy and because it utilizes a powered converter box your...
view full answer... - Trunk Mounted Bike Rack Recommendation for a Leased 2012 Honda CivicThe hitches that are available for your 2012 Honda Civic will require slight modifications to your vehicle to be installed. You will most likely need to modify the heat shield and will need to enlarge access holes to install the Curt Hitch # C11391 as well as any of the other hitches available for your vehicle. Since your vehicle is a leased car, I would recommend you get a trunk mounted bike rack. This would require no modifications to your vehicle and should work very well for you to...
view full answer... - Isolating Wiring Ground Problem to Vehicle or TrailerUltimately all grounds on your trailer are referenced to the tow vehicle's battery negative terminal. The main trailer ground pin on your trailer's plug connects to the vehicle socket ground pin and that wire then runs to the vehicle frame, where the battery is also grounded. So in the end all things ground to the vehicle battery negative terminal one way or another. You could have a ground issue on the trailer, vehicle or both. It is easy to test to find out. Simply disconnect the trailer...
view full answer... - Is There a Class II Trailer Hitch for a 2012 Honda Civic SedanThe only available trailer hitch options for a 2012 Honda Civic Sedan are class I like the Curt Trailer Receiver Hitch part # C11391 and class III the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7235. I can confirm that the EcoHitch has a 300 lb tongue weight rating. I recommend the EcoHitch for the increased capacity and greater selection of hitch mounted accessories.
view full answer... - Compatibility of 2-Inch Thule Hitch Rack with 1-1/4-Inch Class I HitchThe Curt hitch made for your 2006 Honda Civic EX is a light-duty 1-1/4-inch Class I type.. For a hitch with a 2" opening you could go with the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7233. This would work with your Thule bike rack.
view full answer... - Trailer Hitch for 2009 Honda Civic to Tow Small TrailersWe have hitches that fit your 2009 Honda Civic like the Curt part # C11391 which can be used to tow a smaller trailer like you mentioned. This fits both the sedan and couple models. For trailer wiring then you'd need the part # 118420 if you have a sedan or the part # 118437 for a coupe.
view full answer... - How to Get Replacement Installation Hardware for the Curt Hitch # C11391There is a way to get new installation hardware for your # C11391 hitch. All you need is the part # RHK. You will need to select the hitch model number C11391 from the drop down menu.
view full answer... - Trailer Hitch and Interchangeable Ball Mount Recommendation for a 2011 Honda CivicFor your 2011 Honda Civic Sedan the Curt Trailer Hitch Receiver # C11391 that you referenced has been confirmed as a fit. Since this is a Class I hitch like all of the hitches for your vehicle you would have to use the recommended ball mount with the hitch, part # 3593. For an interchangeable ball set to fit the ball mount you would want the part # 802b. For trailer wiring you would want the Curt hitch part # C56011.
view full answer... - Trailer Hitch and 2 Bike Rack Recommendation for a 2012 Honda Civic CoupeA good choice for a hitch on your 2012 Honda Civic Coupe would be the Curt Hitch part # C11391. This rack has a 200 lb tongue weight capacity for a bike rack and bikes, would be mainly out of sight, and would be totally possible for you to install by yourself as long as you have basic mechanical skills and tools. I attached installation instructions and an install video for this hitch for you to check out also. For a bike rack to carry two bikes that would work very well with the # C11391...
view full answer... - Is There a 2 Inch Hitch for a 2019 Acura ILXThe only trailer hitch options available for a 2019 Acura ILX are 1-1/4", the Curt Trailer Hitch Receiver part # C11391 is what I recommend using. That said, there is still an option to use 2" hitch mounted accessories via a hitch expander, the Brophy Hitch Adapter part # HTAD or part # HT5R. Please note, the use of a hitch adapter will reduce the tongue weight capacity by 50%.
view full answer... - Is the Replacement Hardware Kit for Trailer Hitches the Original HardwarePart # RHK is a generic part number however once you enter the hitch manufacturer and part number of the hitch you have you're ordering the exact same hardware that's originally included with the hitch. So by choosing "Curt" in the drop down and entering part # C11391 the hardware you receive is what a new hitch comes with.
view full answer... - Best Trailer Hitch for a 2013 Honda CivicI recommend theCurt Trailer Hitch Receiver Custom Fit # C11391. This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Important things to remember when installing is that no drilling is required for installation. Access holes may need to be enlarged by drilling, filing, or rotary tool. Exhaust must be temporarily lowered for installation and a minor heat shield modification may be required. Trimming your fascia, will not be...
view full answer... - Can 1-1/4" - 2" Receiver Adapter be Used for Kuat NV 2.0 Bike RackThank you for all of the details. I spoke with my contact at Kuat about using an adapter like the Brophy # HTAD with the 2-Bike version of the Kuat NV 2.0 Platform Rack # NV22G-NA22G and she said that using an expanding adapter like that would void the warranty of the bike rack due to the extra play. If you are willing to accept the voided warranty then you could use the 2 bike version with your 2006 Honda Civic with the Curt Trailer Hitch # C11391 and the 4 bike version with your Yukon....
view full answer... - Best Single Bike Rack for a 2012 Honda CivicThe best bike rack to carry one bike with your 2012 Honda Civic is the RockyMounts HighNoon FC Solo Bike Rack # RKY87RR. This bike rack is compatible with Class 2-III 1-1/4" and 2" hitch receivers and comes with a limited lifetime warranty. The RockyMounts HighNoon can carry 1 bike up to 60 lbs with a max wheelbase of 52" and max tire width of 5". Since it is a wheel mount bike rack it can accommodate any bike frame style that doesn't have a front fender. The wheel mount is also great...
view full answer... - Why Isnt A 2 Inch Hitch Available for a 2014 Honda CivicWe do! You could go with the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7235, which has a 300-lb tongue weight and a 2" opening. The Curt # C11391 has a 1-1/4" opening and a 200-pound tongue weight.
view full answer... - Trunk Mount 2 Bike Rack Recommendation for a 2010 Honda Civic For Use Every WeekendIf I were using a bike rack every weekend and removing it during the week, I would opt for a hitch bike rack and receiver hitch for my 2010 Honda Civic. A hitch mounted rack will be much easier to install and remove, will allow access to the trunk when installed and will not damage the finish on the back of the vehicle like a trunk mounted rack can, especially if it is installed and removed a lot. The Curt Trailer Hitch, # C11391, is an economical hitch choice that is not that difficult...
view full answer... - What Would Happen if Vehicle Tongue Weight Capacity Was ExceededYou'll most likely damage the vehicle frame before you do the hitch when you exceed the tongue weight capacity of a vehicle. The trailer hitch from Curt part # C11391 that fits your 2012 Honda Civic has a tongue weight capacity of 200 lbs which you'd need to stay under that figure as well as the figure listed in your owner's manual since you are only as strong as the weakest component in your towing setup.
view full answer... - Best Option for Carrying Bikes with a 2012 Honda CivicSome vehicles have soft bumpers that can dent easily when carrying a trunk mounted bike rack. For these vehicles we strongly recommend the use of a hitch mounted bike rack as this will make no contact with the vehicle. For a hitch for your 2012 Honda Civic you would want the Curt Hitch part # C113914. I attached an install video for you to check out. You will also need a stabilizer strap # 18050 which is required by the Curt hitch to stabilize unsupported loads. The most popular bike...
view full answer... - Availability of Replacement Install Hardware for Curt Trailer Hitch C11391Yes we do carry replacement hardware for all of the trailer hitches we offer with the part # RHK. On the product page just enter your part number and select the manufacturer and we'll ship you out what you need.
view full answer... - Where is the Curt Class I Hitch # C11391 ManufacturedThe Curt Class I hitch, part # C11391, is made in the USA and includes a pin and clip. Note that if used with any non-trailer load, say a bike rack or cargo carrier, Curt requires you to use their stabilizing strap # 18050 which is not a requirement for the Draw-Tite. A helpful hitch install video and article are linked for you.
view full answer... - Bike Rack Recommendation for a 2011 Honda Civic EX-LWe have many bike rack options for your 2011 Honda Civic EX-L, however, you will first want to decide on what type of bike rack you prefer. There are three types of bike racks, trunk mount, hitch mount and roof mount. A trunk mount bike rack like the Thule OutWay 2 Bike Rack, # TH45JV, will be the most cost effective option. This bike rack uses 2 retractable cables to attach to your trunk and can support two bikes up to 33 lbs each. I have attached the installation instructions and a...
view full answer... - Hitch and Bike Rack Recommendation for a 2015 Honda Civic Sedan SIWe have confirmed with Curt that the hitch part # C11391 has been confirmed as a fit for your 2015 Honda Civic SI Sedan so it should work well for you. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap as well. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has...
view full answer... - Trailer Hitch Recommendation for a 2009 Honda Civic SI SedanThe hitch you will want for your 2009 Honda Civic SI sedan is the Curt hitch part # C11391.This hitch has a1-1/4 inch receiver opening, a 200lb tongue weight. If you intend to use this hitch for a bike rack, you would also need the stabilizer strap. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached...
view full answer...
- Curt Trailer Hitch for 2015 Honda Civic SedanThe Curt # C11604 fits the 2016-2018 Honda Civic. Since you have the build date it sounds like you pulled that information from your VIN. The year that comes from the 10th digit of your VIN also indicates the model year which would be the 2015 model. The correct Curt hitch for the 2015 Honda Civic Sedan is the # C11391.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Schuyler H
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
11/4/2023
The hitch is holding up fine. However, my Thule bike rack does not fit snugly in the hitch, and tends to wobble when driving. I installed a bracket to better hold it steady, but the rack still moves slightly.