Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(19 reviews)
Price: $270.34
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11033
Retail:$449.95
Our Price: $270.34
You Save: $179.61
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (19)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11033
- 1-1/4 Inch Hitch
- Class I
- 2000 lbs GTW
- Concealed Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11033 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2011 BMW 3 Series 328xi Sedan
- 2007 - 2010 BMW 3 Series 335xi Sedan
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11033
Average Customer Rating: 4.5 out of 5 stars (19 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Dan03/30/2024
Very poor packaging, resulting in damage to the tow hitch they did not have a bubble wrapped and allowed to steal to bang around while in the box so unprofessional the packaging was terrible
by: Jack 07/13/2023
2009 BMW 3 Series
Very fast shipping. The website is easy to navigate and the quality of the hitch is excellent. I keep coming back because of the great service. I installed the hitch to mount a bike rack on my BMW 3-series for a road trip.
by: Danny 08/13/2023
BMW
Terrific fit on my 2011 BMW 328i, just feels solid! I honestly think it installed like a factory fit! Took me about an hour and a half to complete it with a trimming of the little panel in the center underneath.
by: Brian 09/06/2023
Fit was perfect. Directions were clear.
by: Ferd04/04/2018
2006 BMW 3 Series
I drive a BMW 325 XI and threw this hitch onto it. Once I go it wired up I drove from Dayton Ohio to Waco Texas to purchase a 16 foot fiberglass boat. The drive was 16 hours one way and the hitch was superb. It was sturdy, well built and installed professionally. Needless to say I am a HUGE fan and would certainly recommend this hitch.
by: Erik 06/04/2021
Easy to install! All the parts and instructions for a quick diy hitch. Could not be more impressed with quality. Still holds up today and will for a long time to come.
Erik K.
6/6/2022
Awesome! Easy install, effective instructions and a great lasting product!
by: AJ4USA08/21/2018
2011 BMW 3 Series
First, the service was tops as it arrived in two days. I installed this hitch on my 2011 BMW 328xi sedan. It was nice to be able to download instructions before I ordered the hitch to make sure this was all making sense. I installed the hitch the same day it arrived, knowing that I studied the instructions thoroughly. I must say, the fishwire hardware was the bomb. the whole install took about an hour or so, taking my time and trimming out the under panel properly so that I would look nice and clean. I'll attempt the wiring next.
by: Steven 12/07/2021
Great price. I saved a bunch of money on the hitch itself, and the ease of installation saved money as well. The hitch is very sturdy and I have never had need for concern about the longevity of the product.
by: Johnnyboy04/01/2020
Very good product. I use it to carry my wife's electric scooter chair. Only issue was installing it required a tool I and my son did not have, and we have lots of tools. I had to take it to a shop. It was installed on a 2006 BMW 325i
by: Rod 06/04/2020
Nice coating. Fits perfectly on my 328xi. The instructions for trimming a trim piece was hard to follow. I just lined it up and marked it.
by: Michael c11/28/2016
2006 BMW 3 Series
Looks like a good product and put it on the car yet seems like it will be perfect and I'll be able to handle a job
by: Michael 04/30/2021
Easy Install and Rock Solid
by: Milton 06/17/2020
Prompt delivery. Good product and price. Thanks
Milton
6/18/2021
Great
by: Anthony05/23/2016
2006 BMW 3 Series
I have not even put it on yet.
by: Paul 08/20/2020
2011 BMW 3 Series
Just installed. Was a perfect fit or my 2011 BMW 328i.. Installed in about 1.5 hours..
by: Dan 01/23/2020
Really well constructed. High quality overall!
by: Hunter10/22/2020
The package can as fast as Amazon and shipped nearly 4 hours after purchase.
by: Juan 05/28/2023
by: Raymond 08/27/2021
19
19
See what our Experts say about this CURT Trailer Hitch
- Trailer Wiring Harness for 2011 BMW 328xiThe wiring harness that fits your 2011 BMW 328xi is a universal hardwire, the Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT, so there is no specific diagram available (just the universal one from the instructions which I added); however, I have linked the directions as well as a video of this kit being installed on a 3 Series which you can use for reference. This kit does include a circuit tester to ensure you find the right functions of your lights,...
view full answer...
- CURT Trailer Hitch Recommendation for a 2008 BMW 335xiFor your 2008 BMW 335xi you will want a Curt Trailer Hitch # C11033. I attached installation instructions for this product for you to check out. The Draw-Tite Sportframe Trailer Hitch # 24857 is not a confirmed fit your vehicle so I can not safely recommend it for your application. To complete your towing setup you may be interested in purchasing the following products: Wiring # C59496 (instructions attached) 1-7/8 inch Ball # 19256 2 inch Ball # 19258
view full answer... - Which Curt Trailer Hitch Fits the 2008 BMW 328 WagonI have an option that will fit your 2008 BMW 328 Wagon, however, the Curt Trailer Hitch Receiver # C11033 will not fit the 2008 BMW 328 Wagon, it is made to fit the BMW 328xi and 335xi Sedan. For the Curt hitch, all non-trailer loads bike racks, cargo carriers and so forth should be supported with stabilizing straps # 18050. The Stealth Trailer Hitch Receiver # SH88VR will fit your 2008 BMW 328 Sports Wagon. This hitch also fits both i and xi models. If you need trailer wiring, the...
view full answer... - Hitch and Trike Carrier 2010 BMW 328xi SedanWe have one 2 inch hitch that fits your 2010 BMW 328xi sedan with the Stealth # SH44VR which you can use with the Hollywood Racks Sport Rider Bike Rack for 1 Recumbent or 1 Trike # HR1000Z-R-TRKADP. This also fits 1-1/4 inch hitches too if you wanted to go that route too with the # C11033. Now we don't have a way to swivel this out though or a similar type of rack that has a pivot built in.
view full answer... - Are there Hitches Available that will Fit a 2007-2010 BMW 328i SedanI can check to see if we have anything for a 328i. What year and is it a 2 door, 4 door or wagon?
view full answer... - Ball Mount Recommendation for Curt Hitch for 2008 BMW 335xiWith Class I hitches like what is available for your 2008 BMW 335xi, part # C11033 you have to go with the recommended ball mount otherwise the warranty of the hitch is no longer valid. So you have to use the part # C45521 which is what Curt recommends. It has a 2-5/8 inch drop and 3-1/4 inch rise.
view full answer... - Trailer Hitch For A 2006 BMW 325i SedanThough The Stealth Hitches Hidden Rack Receiver # SH44VR is not confirmed to fit your 2006 BMW 325i Sedan per the manufacturer, The Curt Trailer Hitch Receiver # C11033 is confirmed to fit per Curt. The hitch has a bolt-on installation with no welding required. It has a gloss black powder coated finish that is over a protective base coat that offers superior rust resistance. The trailer hitch has a maximum gross trailer weight up to 2,000 pounds and a maximum tongue weight up to 200 pounds....
view full answer... - Recommended Trailer Wiring Harness for 2006 BMW 325iWhen a hitch is installed on a 2006 BMW 325i it is usually used as an attachment point for a bike rack or other hitch mounted accessory, instead of for towing purposes. For this reason, Tow Ready or Curt don't have a specific recommended trailer wiring kit for the vehicle. I checked with my Curt representative, and was told that a hardwired converter kit like Curt # C59496 would be your best bet. I'll link you to a help article showing several methods of routing the power wire from the...
view full answer... - Is There a Hitch Available for the 2009 BMW 335i ConvertibleThe Curt Class I Trailer Hitch Receiver you referenced, part # C11756, is a fit for the BMW 328i sedan but not for the convertible version. Curt does not offer a hitch receiver for your vehicle. I also checked with Draw-Tite and Hidden Hitch, two other prominent hitch makers, but neither of these hitch manufacturers offers one for your car. In cases where a hitch is not offered for a given vehicle the reason is typically that the engineers have determined that either there is insufficient...
view full answer... - Is There a Hitch Available for the 2006 BMW 330xi I may have a solution for you if you're looking to carry bikes on your 2006 BMW 330xi, but the # C11033 is not a confirmed fit. For whatever reason there is not a hitch available for this particular vehicle and when checking with some of our manufacturers there's a gap between 2004 and 2007 where no hitches are available, so there's not going to be a solution available for towing. However, there are a number of trunk mounted bike racks like the Thule Gateway Pro 2 # TH88VR, which would...
view full answer... - Trailer Hitch Recommendation for a 2006 BMW 325xiAccording to my contact at Curt, the Curt Class I Trailer Hitch, # C11033, will fit on your 2006 BMW 325xi as long as it is a 4 door sedan. If it is a wagon model, then you will need the Stealth Trailer Hitch, # SH88VR. I have attached the installation instructions for you to check out. If you plan on using this trailer hitch to carry any hitch mounted accessories such as a bike rack or cargo carrier, then Curt requires the use of a stabilization strap like part # 18050. The stabilization...
view full answer... - Is There A Trailer Hitch Available For A 2006 BMW 325XI To Haul Bikes Hey Jason, We unfortunately do not currently have a trailer hitch that will fit your 2006 BMW 3-series. I would call around to your local fabrication/weld shops and see if they could find a way to weld on a hitch like the Draw-Tite # 41990-07 and clear your rear fascia without having the hitch sit too low. Your other option aside from a roof rack would be a trunk mount bike rack like the Saris Bones 2 Bike Rack - Trunk Mount # SA805BL. This bike rack has adjustable arms with rubber...
view full answer... - Is There A Trailer Hitch Receiver Compatible With A 2006 BMW 325ci Convertible?There is not a confirmed fit for a 2006 BMW 325 ci Convertible currently from any of our manufacturers. The Curt # C11033 is only a confirmed fit for certain years of the 325i Sedan, the 325xi Sedan, the 328xi Sedan and the 335xi Sedan. If you were looking for a bike rack, we do have a few compatible with your convertible. I recommend the Thule Passage 2-Bike Rack - Trunk Mount - Adjustable Arms # TH910XT. This bike rack has the anti-sway cradles to protect your vehicle and your bikes. If...
view full answer... - Trailer Hitch Recommendation for 2011 BMW 328ixFor your 2011 BMW 328ix the Curt Hitch part # C11033 that you referenced is a confirmed fit. For a ball mount you would want the part # C45521, 2 inch ball # A-82, or 1-7/8 inch ball # A-80. For trailer wiring you would want the part # C59496. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap as well. The most popular bike rack we carry that has...
view full answer... - Recommended Hitch for 2011 BMW 328i Convertible I may have a solution for you, but the Curt # C11033 is only a confirmed fit on the 328xi Sedan and the Draw-Tite # 24857 is only a confirmed fit on the 328i Sedan, so these hitches won't work for you; the bumper isn't necessarily the deciding factor on fit and the more important factor is the frame of the vehicle and the available attachment points. The only hitches that we have confirmed as a fit on the 2011 BMW 3 Series convertible like your 328i are the Stealth Hitches # SH78VR (for...
view full answer... - Is there aTrailer Hitch for a 2007 BMW 328xi Sedan and Options for Carrying a BikeWe have several options for you to carry your bikes. The Curt Hitch # C11033 will fit your 2007 BMW 328xi sedan. This would be my recommendation for carrying Bicycles. You could then choose a bike rack like the Curt C18085 to carry 1 or 2 bikes. There is no advantage to purchasing a ballmount and trailer wiring before you need it, but you certainly can do so if you want to. You could also add a roof rack. You will need 3 items for a roof rack. First, Thule Rapid Podium Roof Mounted...
view full answer... - Options for Carrying 3 Bikes with a 2011 BMW 328xiWe have two hitches for your 2011 BMW 328xi convertible as long as it is not the M3, we have the Stealth Hitch # SH78VR or the # SH94VR. Once you have your hitch installed, you will have a large number of choices for bike racks to carry 3 bikes. I recommend the Thule Helium Pro 3 # TH9043PRO. I have attached a video of this bike rack and the two hitches. You would be able to choose any 3-bike rack that works with a 2" hitch receiver. If you plan on carrying any womens or alternative...
view full answer... - Recommended Trailer Hitch Receiver For 2010 BMW 335iWe do have a hitch that will fit your 2010 BMW 335i, but the Curt Trailer Hitch Receiver # C11033 you were looking at will not fit. You will need the Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" # SH44VR if you are planning on carrying a bike rack or cargo carrier as it only includes a receiver. If you are planning on towing with your 335i you will need the Stealth Hitches # SH88VR instead which includes the same receiver, but also a tow bar, and a vehicle wiring harness. Both...
view full answer... - Difference Between Curt Trailer Hitch # 11756 and # C11033 For 2008 BMW 335xiThe Curt Trailer Hitch, part # 11756, is designed to fit the BMW 335xi that comes equipped with 2 mufflers. The other hitch, Curt Trailer Hitch, part # C11033, is designed to fit the BMW 335xi that comes equipped with 1 single muffler. Both Curt hitches have the same towing and tongue weight capacity of 2000 lbs towing and 200 lbs tongue weight. Both Curt hitches also include a drawbar, pin and clip. To complete your towing setup, you may be interested in the following items: 1-7/8 Inch...
view full answer... - Trailer Hitch Fit for 2011 BMW 328xi SedanThe # C11033 Curt Class I hitch is compatible with single-exhaust equipped vehicles only and isn't intended for vehicles equipped with a Diesel engine. For a completely hidden option, I'd recommend the Stealth Hitch # SH44VR which is only compatible with hitch mounted accessories or # SH88VR which includes the ball mount for towing. There are no fit exclusions for the Stealth Hitch.
view full answer... - How Can I Carry a Bike on My 2010 BMW 328 XI SedanYou have a few options that you can choose from that will allow you to carry a bike on your 2010 BMW 328 XI Sedan. The easiest and least labor intensive option would be to use a trunk mounted bike carrier. The Thule OutWay 2 Bike Carrier, # TH45JV, is the trunk mounted carrier that I recommend. The OutWay will carry up to 2 bikes and uses the Hold Fast anti-sway system to secure your bikes. The bike rack uses only 2 straps instead of the typical 4-6 straps to mount the bike to your vehicle....
view full answer... - Trailer Hitch for a 2008 BMW 328i ConvertibleI would love to help but we do not offer a trailer hitch for a 2008 BMW 328i Convertible. Therefore, no the Curt Trailer Hitch Receiver part # C11033 will not work for you. If you needed to tow a trailer you would have to look at other tow vehicles but if you were wanting a trailer hitch for a bike rack, then we do still have an option for you. You could go with the Thule Gateway Pro # TH88VR so long as the bike(s) does not weigh over 35 lbs. The Thule Gateway is a very nice bike rack...
view full answer... - Will Removing the Nuts Cause Bumper to Fall Off When Installing Trailer Hitch on 2008 BMW 328xiI can see how you might think that but removing the nuts from the bumper attachment won't cause your bumper to fall off when you are installing Draw-Tite hitch # 24857 on your 2008 BMW 328xi. If you take a look at the accompanying photo I added - which are from the instructions of the Curt # C11033 hitch but will be the same in terms of removing the nuts - you can see the studs will remain, holding up the body of the bumper. You can also remove the flange nuts and add the flat washers...
view full answer...
- Which Hitch Will Fit a 2009 BMW 328xiThe only hitch I can safely recommend for your 2009 BMW 328xi is going to be the Curt hitch part # C11033. The Draw-Tite part #24857 hasn't been confirmed as a fit for the 328xi so I can't safely guarantee that it would fit. If you are sure that the vehicles are the same there is a chance it could fit but that's not something we can recommend. Looking at the two hitches the mounting bracket that attaches to the vehicle closest to the front of it is different between the two hitches so...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Dan D
Written by:
Lindsey S
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/1/2024
Oh, I agree that the hitch arrived in rough shape. This is something that I will make our shipping department aware. Our Customer Service team will reach out to you.